Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in diameter. Use for through deck mounting of hardware or anywhere you need a fixed female thread.

Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 Pieces The stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have 1/4 x 20 threads. Use for hanging panels, through deck mounts and many other uses.

.75" Tall Stainless Standoff w/5/16" x 8 Threads - Through-Thread Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in diameter. Use for through deck mounting of hardware or anywhere you need a fixed female thread.

.75" Tall Stainless Standoff w/#10 x 24 Threads - Through-Thread Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in diameter. Use for through deck mounting of hardware or anywhere you need a fixed female thread.

Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make up the assembly. The threaded nut floats allowing accurate bolt alignment. Use for all types of mounting applications.

Oberdorfer 2525.1 Hex Screw 1/4 X 20 X 3/4 Ss  

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.250" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 0.87" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.25" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 1.22" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.06" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.54" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.5" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.625" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 1.0" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 5'