Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.

Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in diameter. Use for through deck mounting of hardware or anywhere you need a fixed female thread.

Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make up the assembly. The threaded nut floats allowing accurate bolt alignment. Use for all types of mounting applications.

Oberdorfer 2525.1 Hex Screw 1/4 X 20 X 3/4 Ss  

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round Base The RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

.75" Tall Stainless Standoff w/#10 x 24 Threads - Through-Thread Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in diameter. Use for through deck mounting of hardware or anywhere you need a fixed female thread.

.75" Tall Stainless Standoff w/5/16" x 8 Threads - Through-Thread Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in diameter. Use for through deck mounting of hardware or anywhere you need a fixed female thread.

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.250" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 0.87" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.06" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.54" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.25" Stud Required: ST125-1420-12SS Clamp Dimensions L/W/D: 1.22" x 0.47" x 0.41" Recommended Clamp Spacing: 3'

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Industrial Kit - No Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications. The AT-7008 Kit Contains: (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (1) AT-300 - Adhesive Dispensing Gun (30) AT-3B - Small Black Cable Tie Mount (100) AT-5B - Large Black Cable Tie Mount (25) AT-5 - Large White Cable Tie Mount (25) AT-7 - Aluminum Base Swivel Wire Tie Mount (25) AT-9 - Aluminum Wire Tie Mount (2) AT-113 - Large Footman's Strap White (2) AT-113B - Large Footman's Strap Black (6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base (6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base (2) SHC-1000 - Single Hose Clamp 1.00" (2) DHC-1000 - Double Hose Clamp 1.00" (1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25" Step By Step Instructions

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.5" Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39" x 0.79" x 0.89" Recommended Clamp Spacing: 4'