Universal Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Universal Mounting Plate fits most brand and models 2kW, 4kW and Braodband Radars.  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Vision Series Mounting Plate for Simrad HALO™ Open Array - Hard Top Only This powder coated marine-grade aluminum plate is used to mount a Simrad HALO™ Open Array on a hard top. The lifted mounting surface prevents drilling through an internal center conduit on many hard tops. This product is used independently and is not compatible with the other Vision Series Mounts and Plates.

Light Arm Receiver for Aft Angled Mounts The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Vision Series Universal Mounting Plate - 15" Diameter with No Holes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 15" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Wing w/Light Arm Receiver Edson's 68800 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts while providing two wings to mount adding space for GPS Antennas and other electronics. Edson's Wing Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Specifications: Base Mount and Mounting Plate sold separately For Vertical Mounts 37" Wide

Light Arm Receiver f/Vertical Mounts Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Base Mount and Mounting Plate sold separately.

Vision Series Univeral Mounting Plate - 10-5/8" Diameter with No Holes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 10-5/8" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome. Mounting Plates are required to complete an Edson Vision Series Mounting Series. Order Base Mount separately.

Wing Light Arm Receiver for Aft Angled Mounts Edson's 68640 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angled Mounts while providing two wings to mount adding space for GPS Antennas and other electronics.  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Wedge kit for 0-4 degree angle adjustment - 7" diameter While underway, the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 67550 0-4 degree Wedge for Round Base Vision Mounts the elevated bow will be offset aligning your radar to see better. Edson's 0-4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount.  Specifications: Base Mount and Mounting Plate sold separately **NOTE: ONLY COMPATIBLE with Vertical Round Base Vision Series Mounts (68930, 68900, 68770, 68910, 68730, 68740)**

Light Arm for Radar Domes and Sat Domes Edson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome.  Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

Light Arm for Open Array Radars Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas.  It is constructed from lightweight aluminum and is powder-coasted white for a durable finish.  For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System. Features: Rugged Design Marine-grade aluminum construction Powder-coated white Rivets included for mast attachment Easy installation First all modular system - extremely versatile Simple selection and installation Requires Vision Mounting Plate to install radar or sat dome antenna Mast Mount Radar Platform For sailboats and trawlers Swivel Feet fit most masts Rivets included

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array Radars The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Heavy Duty Aft Mount 6" Tall Aft raked 30 degrees

4° Wedge for Under Vision Mounting Plate While underway the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 68810 4 degree Wedge for under Vision Mounting Plates the elevated bow will be offset aligning your radar to see better. Edson's 4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount. Order Base Mount and Mounting Plate separately. Specifications 5.313" x 5.063" 3" Inner Diameter

White Poly Fold Down Drop Leaf Table - Edson Vision Series/Console Pedestals Edson’s White Poly Fold-Down Drop-Leaf Tables turn your cockpit into a comfortable dining area. They fold down and clip against the guard when not in use. By simply swinging the table up and clipping the formed wire brackets into place, the table is ready for use. When the leaves are closed you have a 26” (66 cm) long by 15” (38 cm) wide table with fiddle rails. With the leaves folded out the table area increases to a full 26” x 30” (66 cm x 76 cm). Edson Poly Tables : Constructed of solid, UV Stable white marine-grade polyethylene Non-Magnetic Stainless Hardware Easily removable for storage No Legs to get in the way! All Stainless Fasteners Will not rot, swell or delaminate when exposed to humidity or moisture Scuff and scratch resistant Weight 26.8 lbs **IMPORTANT: If mounting table to an Edson Vision Series NV pedestal with curved front, you must also order the Console Table Bracket Adapter #960-A-3006**