|
Swivel Base Flush Mount Rod Holder
Part #: RH-5365SS
Medium 30 Stainless Steel
Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.
|
134.62 |
|
|
Swivel Base Rod Holders
RH570
Stainless Steel Side Mount w/ Swivel Base
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder.
|
210.00 |
|
|
30° Flush Mount Rod Holder - 304 Stainless Steel - 9-1/4"
Features:
Length: 9-1/4"
Flange: 3-3/8" x 4-1/4"
Tube Inner Diameter: 1-5/8"
Fastener: 5/16"(3)
Material: 304 Stainless Steel
|
30.60 |
|
|
80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Swivel Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-9/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 0 degrees
Bottom Style: Swivel
Liner Color: Black
Inner Diameter: 1-7/8 in.
Outer Diameter: 2-5/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10 in.
|
191.75 |
|
|
Flush Mount Rod Holder
RH-534HS Large 15° Stainless Steel
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
|
111.54 |
|
|
Bluewater 30 Deg. Stamped S.S. Flush Mount Rod Holder
Description: Stamped SS construction with full white vinyl liner and gasket. Strong, durable, yet very economical.
Material: 304 Stainless Steel
Fastener: 5/16" (3)
Dimensions: L: Tube Length: 9-1/4"
Flange: 3-7/16" x 4-9/6"
Inside Diameter: Tube ID. - 1-5/8"
|
23.39 |
|
|
80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Swivel Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-9/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 15 degrees
Bottom Style: Swivel
Liner Color: Black
Inner Diameter: 1-7/8 in.
Outer Diameter: 2-5/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10 in.
|
191.75 |
|
|
Flush Mount Rod Holder
RH-530 Large 30° Stainless Steel
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
|
111.54 |
|
|
Swivel Base Flush Mount Rod Holder
Medium, 15 Degree, Stainless Steel
Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.
|
134.62 |
|
|
Stainless Steel Cap for Round Plastic Rod Holders
Features
For use with P1000B, P1000DW, P1015DB and P1015DW
For plastic rod/cup holders with round top
|
7.39 |
|
|
Narrow Gunnel Flush Mount Rod Holder - Black
These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).
|
6.28 |
|
|
Narrow Gunnel Flush Mount Rod Holder - White
These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).
|
6.28 |
|
|
Flush Mount Rod Holder - White
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).
|
8.27 |
|
|
Flush Mount Rod Holder - Black
Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).
|
8.08 |
|
|
Flush Mount Rod Holder
RH-525SS Medium 30° Stainless Steel
The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
|
87.70 |
|