NMEA 2000 right angle cable
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.19 | |
NMEA 2000/NMEA 0183 Simulator/Analyzer
USB simulator for the Marine Industry. Used to simulate NMEA 2000/NMEA 0183 traffic via PGN for analysis/simulation using a Windows-based downloadable software program.
Features:
Fully configurable
Perfect for installers and developers
Technical Specifications:
CE Certification - Marine standard IEC60945
Comm Method - NMEA 2000®
Connector - NMEA2000® Micro
Housing Material - Plastic
Inputs/Outputs - 1/2
NMEA 2000 LEN - 1
RoHS Compliant - Yes
Voltage - 9 to 32 VDC
Waterproof Rating - IP42
In the Box:
Simulator
USB Cable 3' (.3M)
Software (download key)
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
535.39 | |
G2 Satellite Compass - NMEA 2000 with 6M Cable
Accurate Heading & Precise Position for Professionals
Features:
Supports both GPS and GLONASS satellites for complete redundancy
Heading accuracy < 0.25° rms
Position accuracy < 0.3m 95% confidence (DGPS)
An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals
IMO Compliant G3 color display system (optional)
Engineered enhancements to exceed sealed IP67 rating
Extended 2 year warranty
NMEA 2000® interface
Type approved as primary heading AND positioning device
Heave, Pitch, Roll and Rate of Turn as standard output
Heading updates 1 to 20 Hz
BAUD Rate selectable: 4800, 9600, 19200, 38400,115200
Fully compatible with on board NMEA 0183 and NMEA 2000® RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots
Compact integrated surface mounting (Pole mount optional)
IMO Compliant, Wheelmark and USCG approved
Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date
1PPS output standard
15 meter serial cable standard (30 meter optional)
6 meter NMEA 2000® Cable (Optional)
CE certified for EMI and RFI immunity
Worldwide service
|
2792.42 | |
G1 Satellite Compass - NMEA 2000 with 6M Cable
Accurate Heading, Position & Rate of Turn
Features:
Supports both GPS and GLONASS satellites for complete redundancy
Heading accuracy < 0.25° rms
Position accuracy < 0.3m 95% confidence (DGPS)
An integrated 9 Axis Inertial Measurement Core (IMC technology) provides enhanced roll, tilt and heading stability even during momentary loss of satellite signals
G3 color display system (optional)
Engineered enhancements to exceed sealed IP67 rating
Extended 2 year warranty
NMEA 2000® interface
Heave, Pitch, Roll and Rate of Turn as standard output
Heading updates 1 to 20 Hz
BAUD Rate selectable: 4800, 9600, 19200, 38400,115200
Fully compatible with on board NMEA 2000® RADAR, ECDIS, AIS, Cameras, SONAR, PC and Autopilots
Compact integrated surface mounting (Pole mount optional)
IMO Compliant, Wheelmark and USCG approved
Pre-programmed default settings for Heading, Rate of Turn, Course over Ground, Lat/Long position, Time & Date
15 meter serial cable standard (30 meter optional)
6 meter NMEA 2000® Cable (optional)
CE certified for EMI and RFI immunity
Worldwide service
|
2198.23 | |
LinkUp Analog to NMEA 2000 Gateway
The resistive-type LinkUp gateway provides an easy method to convert vessel and engine information to NMEA 2000.
Easily installed, the LinkUp Gateway replaces the original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone while still being complaint with the NMEA 2000 certification requirements.
Configuring the LinkUp Gateway is simple using a mobile device and the companion LinkUp Configuration App for Android or IOS.
Each device has a built-in passive NFC antenna, so the parameters of the sensors are wirelessly configured to type, instance and warning threshold on the mobile device which is then "tapped" against the LinkUp device for instant data download.
Features:
User-friendly configuration through wireless interface and companion smartphone App
Sensor Cable length - 25cm
NMEA 2000 Cable length - 25 cm
Tap to download parameters
Mobile App for Android or IOS
No power required to program
No certification required
Bi-directional communication, programming interface or data recovery
Supported Sensors:
Fuel Level
Oil/Boost Pressure
Fresh/Waste Water Level
Oil/Gear Oil/Coolant Temperature
Trim Tabs
Rudder Angle
Technical Specifications:
Standard M12 NMEA 2000 plug
LED Notification
Operating Voltage - 6 - 16.5V
Nominal Voltage - 12 V (from NMEA 2000 network)
IPX7 Rated
Sensor Plug - Superseal Female 2 Pin
Counterpart Sensor Plug - - Superseal Male 2 Pin
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
111.28 | |
DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20°
Function: Depth / Temperature, Material: Plastic, Fixed Tilt Angle: 20°
Frequency: 235 kHz, Cone: 12°, Power: 100 Watts RMS
Connector: 5-Pin NMEA 2000
Features:
Low-profile, retractable, thru-hull transducer offers depth and temperature functions in a single, compact housing
Tilted Element Transducer – unique design tilts ceramic element inside transducer housing, giving all the advantages of a fairing block without a hull protrusion
Available in fixed 0°, 12° or 20° tilt – perfect for power and sail boat applications
Low-profile housing compensates for hull deadrise, does not affect hull performance and provides accurate readings at high speeds
Designed with Airmar's exclusive Broadband Ceramic Technology, 235 kHz element improves resolution without sacrificing sensitivity
Smart™ Sensor with embedded microelectronics – transducer element and signal processor are only millimeters apart
235 kHz frequency prevents mutual interference with other echo sounders on vessel
Retractable housing with self-closing valve minimizes water flow into the vessel when transducer is removed for servicing
Specifications:
Mount: Thru-hull
Fixed Element Tilt Angle: 20° (for 16° - 24° hull deadrise)
Housing Material: Plastic
Connector: 5-pin NMEA 2000®
Cable Length: 20 ft.
Frequency: 235 kHz
Cone: 12°
Power: 100 Watts RMS
Depth Sensor Range: 1.6 - 594 ft.
Acoustic Window Material: Urethane
Compatible Hull Materials: Fiberglass or metal
Hole Diameter for Installation: 2"
Dimensions: 4.92" H x 2.94" OD
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
341.88 | |
NMEA Starter Kit
Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD).
For use with all Red network devices.
Compatible With: GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, LCX-112C, LCX-113C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF
|
70.08 | |
Lowrance TR-120-KIT
Set of 1 male and 1 female NMEA 2000r7reg; terminators
|
20.02 | |
NMEA2000 Cable - 10M
WeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station.
NMEA 2000 cables end in a standard male NMEA 2000 5-Pin connector. If the cable is longer than 6 meters, it contains a built-in termination resistor and is intended to be used as an extension of the network backbone.
NMEA 0183 cables end in an Airmar 8-Pin connector (CX-128) which can be removed if necessary.
Combined cables end in an Airmar 8-Pin connector and are supplied with an Airmar splitter box that has NMEA 0183 and NMEA 2000 output ports.
Furuno cables end in a 7-Pin Furuno connector and are designed to plug into Furuno NMEA 0183 equipment.
With NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.67 | |
NMEA2000 Cable - 30M
WeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station.
NMEA 2000 cables end in a standard male NMEA 2000 5-Pin connector. If the cable is longer than 6 meters, it contains a built-in termination resistor and is intended to be used as an extension of the network backbone.
NMEA 0183 cables end in an Airmar 8-Pin connector (CX-128) which can be removed if necessary.
Combined cables end in an Airmar 8-Pin connector and are supplied with an Airmar splitter box that has NMEA 0183 and NMEA 2000 output ports.
Furuno cables end in a 7-Pin Furuno connector and are designed to plug into Furuno NMEA 0183 equipment.
With NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
252.29 | |
iKonvert NMEA 2000 Gateway with ISO Interface
The iKonvert NMEA2000-0183 Gateway/Converter is an intelligent and flexible gateway for allowing new NMEA2000 equipment to talk to legacy NMEA0183 equipment. Conversions are bi-directional, so whether you want to get the data from older NMEA0183 sensors on to your NMEA2000 network or you have added a new NMEA2000 only MFD and want it to send GPS and Navigation data to your older NMEA0183 VHF and Autopilot, iKonvert will accurately and intelligently carry out the required data conversions.
There are many, many real life applications for NMEA2000 to NMEA0183, with a plethora of different makes and models of equipment that may need to be connected together. We have designed iKonvert to satisfy as many of these situations as possible by incorporating a simple but effective mode selection method, via a set of DIP switches inside iKonvert. Just remove two screws, open the iKonvert box and using a small screw driver, select the mode you need. The next time iKonvert powers up, it will automatically carry out the conversions you selected.
A number of modes have already been defined including; Heading, Sounder, AIS, GPS, Wind, Instruments and an all data gateway mode, which automatically sets the conversions to be done and the baud rate iKonvert will use. What is more, if you need a mode that we have not defined yet, just let us know and we will consider including it.
Digital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral NMEA0183 cable and standard NMEA2000 Micro drop cable (male). Taking its power from the NMEA2000 network, and providing full galvanic isolation between the NMEA0183 and NMEA2000 networks, iKonvert is the perfect solution for all NMEA conversions.
For customers that want to take this converted data in to a computer, please consider the iKonvert USB gateway, that features an integral USB cable that is compatible with all of the popular operating systems (Windows/Mac/LINUX/Android).
Features:
Small but powerful bi-directional NMEA2000 to NMEA0183 Converter
Powered from the NMEA2000 network
Opto Isolated NMEA0183 Interface
Converts AIS, GPS, Navigation, Instrument and XDR data
Features “Real Life” data modes for most common installations
Simple configuration of data modes using DIP switches
Integral NMEA0183 cable and NMEA2000 Micro (Male) cables
Full galvanic isolation
|
176.35 | |
LANLink NMEA 2000 To Ethernet Gateway
More and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.
LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.
It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.
*This version ships with an iKonvertNMEA Certified gateway
Features:
NMEA 2000 to ethernet gateway version
The NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options)
12/24v DC low power operation
Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection
Web user interface for easy setup from the connected device via browser
TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP
Bi-Directional
The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS
RS232 port for PC apps too
Status indicators for power, data in-out, network link, and server status
Set-Up:
Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup
Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port
Set up with fixed or dynamic IP address
Status page for system diagnostics
Specifications:
Power: 10-35V DC (Consumption approx. 50mA at 12V DC)
Network Port: Ethernet RJ45 10/100MB
IP Mode: Static or DHCP
Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation
NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)
NMEA 2000 option via iKonvertgateway
Operating temp: -25 to +70 degrees C
LED Indicators: Power -Status -Link -Data In -Data Out
Options: RS232 connectivity (non-concurrent with NMEA)
Dimensions (W x H): 95mm x 86mm
|
293.95 | |
Standard Horizon GX2400B Matrix Black VHF w/AIS, Integrated GPS, NMEA 2000 30W Hailer, & Speaker Mic GX2400B Black VHF/AIS Integrated GPS/AIS/NMEA 2000 with 30W Hailer
Power, Performance, Reliability! Featuring the GX2400 Matrix AIS/GPS/NMEA2000.
NMEA2000
Plug and play NMEA 2000 interface. The integrated NMEA 2000 supports all PGN's for Navigation, GPS, AIS and DSC function. Simply plug the NMEA 2000 into your existing network to complement your system with full VHF and DSC features.
Wireless Second Station RAM4W capability
Wirelessly control all radio functions of the GX2400 with the interface of the RAM4W wireless Remote Access Microphone. Using the SCU-30 Wireless Access Point plugged into the back of the radio, you have the capability of syncing up to 4 RAM4W units. With an operating range of up to 65 feet, the RAM4W allows you to control all Radio functions including DSC Calling, Position Polling, Group Calling and more, or use the RAM4W to intercom between the main station or between other wireless RAM4W units.
Built In AIS Receiver
The GX2400 Matrix AIS/GPS/NMEA2000 displays AIS target information (MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG) on the large front panel display. Having this information allows you to contact an AIS Ship directly using DSC, shows your vessels position in relation to AIS targets and alerts you when an AIS ship may be approaching too close to your location via the Closest Point of Approach (CPA) Alarm.
Integrated 30 Watt PA / Loudhailer
Powerful 30 Watt integrated PA system with Loudhailer and listen back capabilities. Switch to fog horn mode to select any of the preprogrammed fog signals, with siren and horn features. For added benefit, the last selected VHF channel can still be monitored when in the PA or Fog modes.
Integrated Voice Scrambler
Loaded with an internal 32 code voice scrambler for private communications. the 32 code scrambler is compatible with all Standard Horizon 4 code scramblers already in use. Simply select a channel to be scrambled then select a common code between the transmitting and receiving radios and your communications are secure.
Features:
NMEA2000 and NMEA0183 Compatible
Built-in Speaker in Microphone Handset
Second station capability with wired RAM4 or wireless RAM4W (when used with the optional SCU-30 WiFi Module)
Built-in integrated 66 channel GPS receiver
Integrated 32 Code Voice Scrambler and 4 Code Voice Scrambler
Noise canceling function for both receive and transmit audio
Meets ITU-R M.493-15 Class D (Digital Selective Calling)
Separate Receiver for CH70 (Receiving DSC Calls)
AIS/AIS SART target display: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG
E2O (Easy to Operate) Icon & Menu System
Preset key stores up to 10 favorite channels
Intercom Feature between the Radio and an Optional Second Station
Programmable Scan, Priority Scan, and Multi Watch
DSC position request and report functions
GPS Compass, Waypoint and GPS status pages
Enter, Save, and Navigate to a waypoint using the Compass page
Navigation (LAT/LON, Time, SOG and COG) information is shown on display
Programmable CPA (Closest Point of Approach) or TCPA (Time to Closest Point of Approach) alarms
Commercial grade receiver (Spurious & Image rejection better than –80dB)
30 Watt PA/Loud Hailer with programmed fog signals and listen back
GM (Group Monitor) Using DSC Group position Calling
MOB (Man over Board) Operation
Excellent Visibility with Busy LED Indicator
Selectable Night Mode Display
NOAA Weather Channels with Weather Alert
|
432.60 | |
NMEA 2000 1M Drop Cable
This Digital Yacht cable is a 1m (3ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.
*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.
Features:
1m (3ft) NMEA 2000 Drop Cable
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors improve reliability
Waterproof rating IP68
|
26.83 | |
NMEA 2000 3M Drop Cable
This Digital Yacht cable is a 3m (9ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.
*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.
Features:
3m (9ft) NMEA 2000 Drop Cable
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors improve reliability
Waterproof rating IP68
|
28.51 | |