White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

AT-5 Large White Nylon Tie Mount - Qty. 500 The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Mini G3 Retractable Transom Tie-Down System - 1" x 72" Just hook, ratchet and go! Never look for lost tie-downs again. The Mini G3 Transom tie-down can be permanently mounted with one bolt to most boat trailers. Six feet of one-inch webbing enables you to tie down more equipment in more applications, conveniently and securely. Features: Permanent one-bolt installation Self-retracting web Anti-corrosive construction Break Strength 1,400lbs/ea SWL 466lbs/ea

Kwik-Lok Bow Tie-Down - 1" x 3' Our Kwik-Lok Bow Tie-Down features a vinyl-coated S-hook and a loop end for easy attachment. Both models are made with 2,500 lb. nylon webbing. For maximum trailering safety, IMMI recommends that a bow tie-down always be used in conjunction with a winch strap and transom or gunwale tie-down. Break Strength: 1,200lbs SWL: 400lbs

Cooler Tie Down Kit  This Cooler Tie Down Strap Kit includes everything you need to secure your cooler to your boat, truck or trailer during travel.  The adjustable straps create a strong, secure hold and the included hardware is stainless steel, so it won't rust or corrode.  Features: Mount to boat deck, truck bed or trailer to create a tie-down point for coolers Stainless Steel hardware won't rust or corrode Easy to install In the Box: Two (2) Tie down straps Mounting hardware *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® Tough-Ball™ for Bronco Hood Tie-Down The RAM® Tough-Ball™ for Bronco Hood Tie Down (RAP-B-379U-252062-2SLW) is a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post, ideal for installing RAM® Mounts on the Bronco Hood Tie Down. The included split lock washers ensure a secure connection in rugged environments when the RAM® Tough-Ball™ is used as an anchor point for a mounting system. This base replaces the OEM exposed bolts on the hood tie-down found on all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor. Features: Includes RAM® Tough-Ball™ with 1/4"-20 x .625" threaded stud and two split lock washers Compatible with B size RAM® double socket arms, ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum and stainless steel components for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (2) Split Lock Washers Thread Pitch: 1/4"-20 x .625" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs; Heavy-Duty Use: 1 lb Materials: High-strength composite, stainless steel threads Packaging Type: Polybag Weight: 0.11 lbs

RAM® Tough-Ball™ for Bronco Hood Tie-Down with Action Camera Adapter The RAM® Tough-Ball™ for Bronco Hood Tie Down with Action Camera Adapter (RAP-B-379-252062-2SLW-A-GOP1U) is an action camera mounting solution that installs on the Bronco Hood Tie Down. This kit includes a medium-length double socket arm, a 1" diameter ball with a custom GoPro® Hero adapter, and a 1" diameter rubber ball connected to a 1/4"-20 x.625" male threaded post. The included split lock washers ensure a secure connection in rugged environments when the RAM® Tough-Ball™ is used as an anchor point for a mounting system. This base replaces the OEM exposed bolts on the hood tie-down found on all Ford Bronco models, including the base model, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, and Raptor. Features: Action camera adapter includes a 1" B-size RAM® rubber ball and is compatible with GoPro® and most other brands; attaches to the underside of cameras Includes RAM® Tough-Ball™ with 1/4"-20 x .625" threaded stud and two split lock washers Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (2) split lock washers Socket to Socket Length: 1.75" Thread Pitch: 1/4"-20 x .625" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: High-strength composite, stainless steel threads Packaging Type: Polybag Weight: 0.31 lbs Compatible Devices: GoPro: Hero, Session Garmin: Virb SJCAM: SJ4000, SJ5000X Elite 4K Muvi: veho K-Series K-2 Pro 4K Xcel: 1080C Vivitar: HD ACTIVEON: CX Gold Discovery: Kids Photo & Video Adventure Camera AEE: ACE S70 Black 16MP 2" AKASO: EK7000 4K WIFI Sports AEDILYS: 4K WIFI Sports Lightdow: LD4000 1080P HD WiMiUS: Q2 Black 1080P Wifi Vtin: 4k, WiFi

BoatBuckle® G2 Retractable Gunwale Tie-Down Quantity: 2 Dimensions: 2"-38" Break Strength: 2,500 lbs./ea Safe Work Load: 833 lbs The only one in its class,the BoatBuckle® G2 Gunwale Tie-Down offers the same superior quality as a BoatBuckle® G2 Transom Tie-Down,yet boasts a beefy vinyl-coated double J-hook,designed to fit gunwale rails that measure 2" wide or less.Perfect for aluminum or other narrow gunwale boats.

Heavy-Duty Transom Tie-Downs Quantity: 2 Dimensions: 2" x 4' Break Strength: 2,500 lbs./ea Safe Work Load: 833 lbs When you need maximum torque and strength, look to our Heavy-Duty line of tie-downs. Features include 5,500 lb. polyester webbing, vinyl-coated top hook and protective pad. Our Heavy-Duty Ratchet is great for those times when you need a little extra holding power. The Heavy Duty Locking tie-down provides added safety and security