|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
27.59 |
|
|
Prop installation hardware, sold 1 piece per package. Refer to Yamaha hardware for other spacers and washers.
|
4.59 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
45.39 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
47.79 |
|
|
Fits: OMC 25-35 HP 3-cyl - 1997-99. Replaces: OMC 586277. 10-tooth drive gear. Uses DVK98 2-piece replacement drive kit, SR398 repair kit.
|
189.56 |
|
|
Series 25 T-Track - Composite Slide - Series 40 BB Orbit Block? 153; - Stand Up - Suits 9mm(5/16") Rope
For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment.
Lightweight
Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fiber equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car.
Integrated Functionality
The clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.
Low Profile and Compact
Sleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged.
Precise Adjustment
The ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle.
Features:
Low profile and lightweight
Removable attachment pin to suit either Dyneema® Link or a shackle
Integrated becket for 2:1 headsail sheet systems
Applications:
Headsail sheet leads on boats up to 8M (26').
Materials:
Toughened, glass fibre reinforced Nylon slide.
DSpecifications:
Length: 102mm(4")
M.W.L.: 325kg(715lbs)
B. L.: 700kg(1,540lbs)
Weight: 144g(5.1oz)
|
72.32 |
|
|
Series 25 Utility Block™ - Single - Loop Head
Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters, etc on larger boats
Materials:
U.V. stabilized acetal sheaves
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 25mm(1")
Max. Rope Ø: 6mm(1/4")
M.W.L.: 300kg(660lbs)
B. L.: 600kg(1,320lbs)
Weight: 15g(0.5oz)
|
9.68 |
|
|
Series 25 Utility Block™ - Single - Swivel Shackle Head
Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
Features:
Lightweight durable construction
Economical
Maintenance free
Applications:
Vang, cunningham and trapeze retriever systems on dinghies
Leech line tackles, bunk adjusters, etc on larger boats
Materials:
U.V. stabilized acetal sheaves
Grade 316 Stainless Steel cheeks
Specifications:
Sheave Ø: 25mm(1")
Max. Rope Ø: 6mm(1/4")
Pin Ø: 4mm(5/32")
M.W.L.: 150kg(330lbs)
B. L.: 300kg(660lbs)
Weight: 20g(0.7oz)
|
15.42 |
|
|
Series 25 T-Track - Composite Slide - 102mm(4")
For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment.
Lightweight
Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car.
Integrated Functionality
The clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories.
Low Profile and Compact
Sleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged.
Precise Adjustment
The ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle.
Features:
Low profile and lightweight
Removable attachment pin to suit either Dyneema® Link or a shackle
Integrated becket for 2:1 headsail sheet systems
Applications:
Headsail sheet leads on boats up to 8M (26').
Materials:
Toughened, glass fibre reinforced Nylon slide.
DSpecifications:
Length: 102mm(4")
M.W.L.: 500kg(1,100lbs)
B. L.: 1,000kg(2,200lbs)
Weight: 107g(3.8oz)
|
31.75 |
|
|
Series 25 T-Track - Spinnaker Pole - Composite Slide & Stop - 102mm (4")
For small keel boats and sports boats, T-Track jib lead and spinnaker pole slides are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on an anodized aluminium track, and allow quick and easy manual adjustment.
Specifications:
Length: 102mm
M.W.L.: 400 kg
B.L.: 800 kg
Weight: 215 g
|
119.48 |
|
|
Prop kits containing thrust washer, spacer, nut and cotter pin.
|
33.49 |
|
|
Ethernet Cable for M-Series - 25'
FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.
Features:
Double Shielded
RJ-45
LSZH
25' long
|
72.86 |
|
|
RDS-Series PRO 30" - Spot LED - Midnight Edition - Black
RIGID revolutionized the lighting industry with the introduction of the RDS-Series, and recent advancements in LED technology have made them more powerful than ever before with the RDS-Series PRO, Professional Race Output. With an improved output of up to 70% more raw lumens, the RDS-Series PRO projects more usable light exactly where it's needed on the road ahead. By taking an E-Series light bar and treating it to a gentle arc, the RDS-Series PRO provides a sleek, integrated look with the curved windshields and bumpers on today's trucks and SUVs. The curve is for more than just looks, it is also functional: the arc of the RDS-Series PRO light bars provides a wider spread of LED light, providing unmatched lighting coverage with a single light bar. RDS-Series PRO also includes updated branding and blacked-out circuit boards for a more refined look. It's all about stealth with RIGID's new Midnight Optics. Utilizing our exclusive spot optic with a transparent black enamel coating, our Midnight Optics take the subtle "blacked out" look seriously featuring black oxide hardware. The Midnight Optics enable RIGID to "disappear" during the day while still providing powerful LED technology to light up the night. Thanks to improved LED technology, the Midnight Edition now offers more light output than ever before. Midnight Optics are available in E-Series, RDS-Series and D-Series product lines.
Features:
Family: Midnight Edition
Optic: Spot
LED Color: White
Finish Color: Black
Mount Type: Surface
Length: 30"
Shipping Dimensions: 6" × 33.25" × 6"
Product Weight: 8.99lb
Sold As: Single
Specifications:
Watts: 225
Amp Draw: 16.3
LED's: 60
Raw Lumens: 15690
|
1245.00 |
|
|
RDS-Series PRO 30" - Spot LED - White
RIGID revolutionized the lighting industry with the introduction of the RDS-Series, and recent advancements in LED technology have made them more powerful than ever before with the RDS-Series PRO, Professional Race Output. With an improved output of up to 70% more raw lumens, the RDS-Series PRO projects more usable light exactly where it's needed on the road ahead. By taking an E-Series light bar and treating it to a gentle arc, the RDS-Series PRO provides a sleek, integrated look with the curved windshields and bumpers on today's trucks and SUVs. The curve is for more than just looks, it is also functional: the arc of the RDS-Series PRO light bars provides a wider spread of LED light, providing unmatched lighting coverage with a single light bar. RDS-Series PRO also includes updated branding and blacked-out circuit boards for a more refined look.
Features:
Family: RDS - Series | PRO
Optic: Spot
LED Color: Cool White
Finish Color: White
Mount Type: Surface
Length: 30"
Shipping Dimensions: 6" × 33.25" × 6"
Product Weight: 8.99lb
Sold As: Single
Tough Alodine Coating that withstands the harshes Marine Environments
Limited Lifetime Warranty
Specifications:
Watts: 155
Amp Draw: 11.07
LED's: 60
Raw Lumens: 47520
Lux @ 10M: 2050.34
Beam Distance: 452.8M
Peak Beam Intensity: 205034 cd
|
1181.24 |
|
|
E-Series PRO 30" Spot-Flood Combo LED - White
The E-Series is one of RIGID's most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID's most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.
Features:
Optics: Hybrid - Spot / Flood Combo
LED Color: White
Finish Color:White
Length: 30"
Mount Type: Surface
Shipping Dimensions: 6" × 33.25" × 6"
Product Weight: 8.78lb
Sold As: Single
Specifications:
Watts: 165
Amp Draw: 11.96
LED's: 60
Raw Lumens: 13800
Lux @ 10M: 4010.0
Beam Distance: 1266.5M
Peak Beam Intensity: 401,000 cd
|
849.74 |
|