Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end For Johnson/Evinrude engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Yamaha Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Yamaha engines and tanks. The kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: A pair of hose fittings 8896LP6 for the tank end and the engine end for Yamaha engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Standard Dee Slotted Pin Shackle - 5/32" Pin - 5/8"L x 3/8"W Features: Slotted shackle pins are low profile to prevent snagging on ropes etc... Grade 316 Stainless Steel bodies and pins

Universal Fuel Line Kit - 3/8" Diameter x 6' Length This Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.  Features: 3/8" x 6' Low Permeation Hose Universal for any engines and tanks Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Reliably delivers fuel to your engine *Does not include fittings for the tank end and for the engine end

Universal Fuel Line Kit - 3/8" Diameter x 12' Length This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Features: 12' x 3/8" Low Permeation Hose There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance Universal for any engines and tanks This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Reliably delivers fuel to your engine *No tank or engine fittings

EvoFlex2 25' Lightweight RV/Marine Drinking Water Hose - Fabric Reinforced - 5/8" ID Camco’s EvoFlex2 25-Foot Drinking Water Hose with a 5/8-inch inner diameter is ideal for RV and marine use. The tough polyester outer fabric helps maintain the hose's shape and protects it from breaks, cracks, and leaks. This product features aluminum fittings with a molded strain relief. It is drinking water safe and has a lead-free, BPA-free, and phthalate-free formulation. The hose leaves no strong plastic taste in your water. When not in use, this extra flexible hose is compact and easy to store—perfect for tight spaces. Includes a storage bag. Features: Extra Flexible Design: Extra flexible hose is ideal for RV and marine use. A tough polyester outer fabric helps maintain the hose's shape and protect it from breaks, cracks, and leaks The Perfect Size Hose: 25-foot hose with 5/8-inch diameter Drinking-Water Safe: Contains a BPA-free, lead-free, and phthalate-free formulation Provides Great Tasting Water: The hose won't leave a strong plastic taste in your water Durable Construction: Features aluminum fittings with a molded strain relief Easy to Store: Hose is compact for simple storage—perfect for tight spaces; includes a storage bag

Universal Fuel Line Kit - 5/16" Diameter x 6' Length This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance. Features:  This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines. Universal for any engines and tanks Multi-Layer, Low-Permeation Primer Bulb 6 ft. x 5/16 in. Low Permeation Hose Reliably delivers fuel to your engine *No end fittings included

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Short Arm and X-Grip® for Phones Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8" - 5/8" in diameter with a B-sized short length arm and the dynamic X-Grip® for phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. We’ve paired this mount with the dynamic X-Grip®. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Cradle Dimensions Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Features: 1. Rustproof 2. Spring loaded cradle expands and contracts for perfect fit of your device 3. Rubber coated tips will hold device firm and stable 4. Socket technology allows for multiple adjustment angles and articulation of device 5. Includes Tether for open cockpit and extreme environments 6. Lifetime warranty 7. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size 

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for Phones Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8" - 5/8" in diameter with a B-sized standard length arm and the dynamic X-Grip® for phones. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Cradle Dimensions Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded cradle expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Includes Tether for open cockpit and extreme environments 7. Lifetime warranty 8. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size 

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Medium Arm and X-Grip® for 7-8" Tablets Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8” – 5/8” in diameter with a B-sized standard length arm the dynamic X-Grip® for 7”-8” tablets. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Cradle Dimensions Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Socket technology allows for multiple adjustment angles and articulation of your tablet 4. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 5. Includes Tether for open cockpit and extreme environments 6. Lifetime warranty 7. Rustproof 8. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size 

Vision Series Univeral Mounting Plate - 10-5/8" Diameter with No Holes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 10-5/8" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome. Mounting Plates are required to complete an Edson Vision Series Mounting Series. Order Base Mount separately.

Sail Slide - Internal Track - 16mm(5/8") Wide x 32mm(1-1/4") Long Impact Resistant, U.V. Stabilized Nylon White

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.56 lbs.

Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball The RAM® Torque™ handlebar and rail mounting base has a 1" rubber ball and accommodates bars 3/8" to 5/8" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Allows for mounting to scooter mirror rails as well as vehicle headrests and other round rails within the stated dimensions. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Specs & Features Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.21lbs

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base with 1" Ball, Short Arm and X-Grip® for Larger Phones Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 3/8" to 5/8” in diameter with a B-sized short length arm and the dynamic X-Grip® for larger phones. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter Cradle Dimensions Minimum Width = 1.75" (Minimum Height = 5.5") Maximum Width = 4.5" (Minimum Height = 3.25") Depth = 0.875" Features: 1. Rustproof 2. High strength composite and stainless steel construction 3. Spring loaded cradle expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable 5. Socket technology allows for multiple adjustment angles and articulation of device 6. Includes Tether for open cockpit and extreme environments 7. Lifetime warranty 8. Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size