Premium Replacement Ignition Coil for Johnson/Evinrude Outboard Engines 1972-2006 This ignition coil fits 1972-2006, Universal Replacement Kit, Carbureted 2 Stroke Engines, 1 per Cyl. Replaces: Johnson / Evinrude Ignition Coil 584561 Johnson / Evinrude Ignition Coil 582106 Johnson / Evinrude Ignition Coil 583737 Johnson / Evinrude Ignition Coil 582366 Johnson / Evinrude Ignition Coil 581861 Johnson / Evinrude Ignition Coil 581862 Johnson / Evinrude Ignition Coil 581686 Johnson / Evinrude Ignition Coil 581997 Johnson / Evinrude Ignition Coil 582330 Johnson / Evinrude Ignition Coil 581998 Johnson / Evinrude Ignition Coil 581685 Johnson / Evinrude Ignition Coil 581819 Johnson / Evinrude Ignition Coil 582062 Johnson / Evinrude Ignition Coil 582062 SIERRA Ignition Coil 18-5176 *ARCO Assurance 12-month part and labor warranty protection   This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Premium Replacement Ignition Coil for Johnson/Evinrude Outboard Engines 1985-2006 This ignition coil fits 1985-2006 (2.5-55HP – 2 Cyl.), 1995 (50HP – 3 Cyl.), 1995-2006 (80-115HP – 4 Cyl.), and 1991-2006 (105-175HP – 6 Cyl.) Johnson/Evinrude engines. Replaces: Johnson / Evinrude Ignition Coil 583740 Johnson / Evinrude Ignition Coil 583298 Johnson / Evinrude Ignition Coil 583040 Johnson / Evinrude Ignition Coil 777664 SIERRA Ignition Coil 18-5170 CDI Electronics Ignition Coil 183-3740 *ARCO Assurance 12-month part and labor warranty protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Magnesium Anode 200mm for Water Heater Quick OSP Boiler Magnesium Anode 200mm. Features:  Magnesium Anode 200mm Used with water heaters

Johnson/Evinrude Outboard Starter - Late Model The outboard starter that will fit BRP-OMC 1991-Up, 150-175 HP V6 Eagle-Series, 1997-Up V4, and V6 2003 75/90/115 HP, 2003-UP 90/105/115 60o Engine, 2004-UP 100-175 HP Direct Injection. ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit. Features: Dynamically tested and packaged for out-of-the-box performance Nickel-coated and epoxy-painted to reduce corrosion  Sealed to minimize water intrusion Designed for long life and optimum performance Armatures are tested to withstand 50 times operating voltages (12 volts) Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: Johnson/ Evinrude 432925 Johnson/ Evinrude 438878 Johnson/ Evinrude 586286 Johnson/ Evinrude 586287 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6 Hose and tank fittings come with pre-applied thread sealant There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance For Johnson/Evinrude engines and tanks This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines *No Fuel Demand Valve in this kit

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6 In-Line Fuel Demand Valve Hose and tank fittings come with pre-applied thread sealant Reliably delivers fuel to your Johnson or Evinrude engine *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines

Magnesium Anode for 6-Gallon Water Heater Raritan's Magnesium Anode is made specifically for Raritan's 6-Gallon Water Heater. Features: 16-1/8" Stainless Steel Fitting WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Magnesium Anode for 12 and 20-Gallon Water Heater Raritan's Magnesium Anode is made specifically for Raritan's 12 and 20-Gallon Water Heater. Features: 16-1/8" Stainless Steel Fitting WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Spurs Line Cutter Magnesium Anode - Size A & B Features: Size: A & B Material: Magnesium Anode

Spurs Line Cutter Magnesium Anode - Size C, D & E Features: Size: C, D & E Material: Magnesium Anode

Spurs Line Cutter Magnesium Anode - Size F & F1 Features: Size: F & F1 Material: Magnesium Anode

Spurs Line Cutter Magnesium Anode - Size F2 & F3 Features: Size: F2 & F3 Material: Magnesium Anode

Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting) This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end For Johnson/Evinrude engines and tanks *No Fuel Demand Valve or Tank Fitting is included in this kit

Seaward Magnesium Anode Fits all Seaward by Whale water heaters. Features: Material: Magnesium Length: 4" Thread: 3/4" pipe WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Yamaha 300-350 HP Magnesium Anode Kit - No Hardware Specifications: Material: Magnesium No hardware included 300-50 HP