ROKK Mini Mount Kit - Rail Mount - Phone Clamp The ROKK Mini universal phone mounting kit is the toughest mounting system for your telephone. The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more.  Move your electronics conveniently between different types of base mounts in different locations in one easy click.  Want to unlock multiple mounting options in different locations or simply mount a different electronic device?  Just add another top or base to your modular kit and extend possibilities of your ROKK mini starter kit. This three (3) part kit installs in minutes and allows quick release of mounted equipment. Features: Engineered to withstand high shock loading. Secure mount for smart phones, handheld GPS and other small devices. Base secures to a rail with included hardware. In the Box: RLS-402 Mini Rail Mount RL-509 Universal Phone Clamp RLS-AM ROKK Mini Adjustable Arm *Sold as a Kit

Major Rebuild Kit for Sherwood G-1009 This kit contains the following items   ON 509-0450 1 MOUNTING GASKET SH 10514C 1 LIP SEAL SH 10515C 1 SCREW & WASHER SH 10615K 1 IMPELLER KIT SH 10944 1 CAM BRASS LARGE CHRYSLER SH 12710 7 LOCKWASHER SH 12855 1 GASKET SH 12857 7 SCREW SH 12859 1 SEAL/SEAT ASSEMBLY SH 14161 2 EXT RETAINING RING SH 23448 2 BEARING SH 24629 1 SLINGER SH 25150 1 WEAR PLATE SH 4258 1 SNAP RING (SMALL) SH 4259 1 SNAP RING (LARGE) SH 4264 1 WASHER SH 4432 1 KEY SH 5133 1 SPACER      This kit is put together at time of order.

Sierra oil seals for upper gearcase applications in Johnson, Evinrude, BRP and OMC Sterndrive/Cobra engines.

150 Ampere Common Busbar 20 x 8-32 Screw Terminal with Cover PN:   2312 Stud design provides direct terminal to bus contact for low resistant connection Stainless steel studs and screws allow high torquing for excellent electrical contact Tin-plated copper bus for maximum conductivity and resistance to corrosion UL 94-VO rated (self extinguishing) base material resists high heat Press on insulating cover attaches to studs and allows unobstructed wire access Raised bus provides easy access to multiple wires on a single screw Continuous Amperage 130 Amperes AC 150 Amperes DC Maximum Voltage Rating 300 Volts AC 48 Volts DC Bus Material Tin-Plated Copper CDA 110/UNS11000 Base Material Glass Reinforced Polycarbonate Cover Material Polycarbonate Studs Stainless Steel, 1/4"-20, torque 72 in-lbs, accepts 1/4" (M6) ring terminal Screws Stainless steel, #8-32 screw terminal, torque 18 in-lbs, accepts #8 (M4) ring terminal Weight 0.58Lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Major Rebuild Kit for Jabsco 30415-7001 This kit contains the following items   JA 11830-0000 1 ENDCOVER JA 18673-0001-P 1 IMPELLER KIT NEO JA 18753-0125 1 O'RING (1 PER BAG) JA 18753-0628 1 SNAP RING JA 18753-0630 1 OIL LIP SEAL JA 30424-0000 1 CAM KIT JA 92601-0474 2 BEARING JA 96080-0080 1 SEAL JE X3001-095F 7 SCREW M4X8 HEX HD SS NL 052400400 1 O'RING NITRILE NL 15-00023 7 HELICAL LOCKWASHER M4 SS NL 25-12024 1 BEARING SPACER   This kit is put together at time of order.

ST CLB Circuit Breaker Block - 6 Position Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover Specifications: Circuits: 6 Maximum Amperage: 32A (per circuit) 40A (per jumped circuit group) Maximum Voltage: 32V DC Mounting: #8 Screw (M4) or #8 Nut Source: Independent SourceMinimum Operating Temperature: -10° C Maximum Operating Temperature: 60° C Mounting Centers: 5.63"(143 mm) Screw Terminal Type: #8-32 Screws with Captive Star Lock Washer Height: 6.69"(169.93 mm) Weight: 0.75lb (0.34 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST CLB Circuit Breaker Block - 12 Position Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover Specifications: Circuits: 12 Maximum Amperage: 32A (per circuit) 40A (per jumped circuit group) Maximum Voltage: 32V DC Mounting: #8 Screw (M4) or #8 Nut Source: Independent SourceMinimum Operating Temperature: -10° C Maximum Operating Temperature: 60° C Mounting Centers: 10.13"(257.3 mm) Screw Terminal Type: #8-32 Screws with Captive Star Lock Washer Height: 6.69"(169.93 mm) Weight: 1.50lb (0.68 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST CLB Circuit Breaker Block - 6 Position w/Negative Bus Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover Specifications: Circuits: 6 Maximum Amperage: 100A (per block) 32A (per circuit) Maximum Voltage: 32V DC Mounting: #8 Screw (M4) or #8 Nut Negative Bus: Yes Source: Common SourceMinimum Operating Temperature: -10° C Maximum Operating Temperature: 60° C Mounting Centers: 5.63"(143 mm) Screw Terminal Type: #8-32 Screws with Captive Star Lock Washer Height: 6.69"(169.93 mm) Weight: 0.75lb (0.34 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST-Blade Split Bus Fuse Block Features: Provides two isolated groups of six ATO/ATC circuits For use with either two isolated batteries or with a single battery providing a mix of 24 hour and switched circuits Screw terminals for securing wires accept ring terminals One-piece stainless flange nuts ensure safe and secure connections Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements Easy to open, push button latch for easy access to fuses Tin-plated copper buses and fuse clips Fuses sold separately Specifications: Circuits: 12 Maximum Amperage: 100A per block, 30A per circuit Maximum Voltage: 32V DC Mounting: #8 Screw (M4) Negative Bus: #10-32 Stud Screw Terminal Type: #8-32 Screws with captive star lock washer WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST CLB Circuit Breaker Block - 12 Position w/Negative Bus Features Quick connect clips allow circuit breakers to snap easily into place Tin-plated copper busses and screw terminals Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements Easy to open clip on cover Breakouts allow wire access in two directions Accepts ring terminals Optional push button waterproof boots or dress nuts can be installed over cover Specifications: Circuits: 12 Maximum Amperage: 100A (per block) 32A (per circuit) Maximum Voltage: 32V DC Mounting: #8 Screw (M4) or #8 Nut Negative Bus: Yes Source: Common SourceMinimum Operating Temperature: -10° C Maximum Operating Temperature: 60° C Mounting Centers: 10.13"(257.3 mm) Screw Terminal Type: #8-32 Screws with Captive Star Lock Washer Height: 6.69"(169.93 mm) Weight: 1.50lb (0.68 kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST Blade Compact Fuse Blocks - 4 Circuits w/Cover Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space. Compact common source fuse block Accepts ATO® and ATC® fast acting blade fuses Single side entry wiring Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Small format standard and custom labels available Specifications Circuits:4 Maximum Amperage: 100A per block / 30A per circuit Maximum Voltage:32V DC Mounting: #8 Screw (M4) Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ST Blade Compact Fuse Blocks - 8 Circuits w/Cover Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space. Compact common source fuse block Accepts ATO® and ATC® fast acting blade fuses Single side entry wiring Ignition Protected-meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Small format standard and custom labels available Specifications Circuits:8 Maximum Amperage: 100A per block / 30A per circuit Maximum Voltage:32V DC Mounting: #8 Screw (M4) Screw Terminal Torque:#8-32 Screws with captive star lock washer in-lb (0 Nm) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 Ohm VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.  These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.  Features: Connection - M4 Stud Voltage: 6-24V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 Ohm VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.  These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.  Features: Connection - M4 Stud Voltage: 6-24V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blade Style LED Indicator Fuse Block with Negative Bus Bar - 6 Circuit Nickel Plated Copper/Stainless Steel/Injection Molded ABS. Features: Red LED lights indicate when fuse is blown or missing Uses ATO/ATC & ATM fuses 1A-30A Main line terminal rating is 100A 32VDC max, with M5 metric threaded studs Single line terminal rating is 30A 32VDC max, with M4 metric threaded studs Includes semi-transparent cover and 71 labels Terminals are nickel plated copper with stainless steel screws Installs with four #8 FH fasteners (not included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.