|
Adjustable Suction Cup Mount
Secure and adjust your nüvi® device with this pivoting suction cup mount. Simply suction your mount to the windshied or the adhesive dashboard disc, and use the vehicle power cable to charge your device while you drive.
Compatible Devices:
nüvi® 3x0 Series
nüvi® 6xx Series
nüvi® 7xx Series
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.24 |
|
|
Powered Suction Cup Mount with Speaker
Garmin's premium suction cup mount provides easy viewing of your 5" device. It includes a speaker with the highest sound quality in the nüvi® lineup so voice prompts come through clearer. Mount can be attached to your windshield or any smooth, flat surface.
Mount and power your nüvi® device with this powered suction cup mount. Included speaker provides clear voice prompts.
Compatible Devices:
nüvi® 3550LM
nüvi® 3590LMT
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.08 |
|
|
Suction Cup
Secure your device to your windshield or any smooth, flat surface with this suction cup.
*Mount NOT Included
Compatible Devices:
aera® 5xx Series
nüLink!® 16xx LIVE Series
StreetPilot® Series
SafeNav™ Powered by Garmin
nüvi® Series
zūmo® 550, 660 & 660LM Series
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.89 |
|
|
RAM Base & Ball w/Garmin Mounting Hardware
The RAM-B-202-G2U, marine grade aluminum base, consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has a three hole pattern which will connect to the base of the Garmin Marine GPS unit swivel mounts.
This base is designed to connect to the following devices:
Garmin Fishfinder 120
Garmin Fishfinder 140
Garmin Fishfinder 160C
Garmin Fishfinder 250/250C
Garmin Fishfinder 320C
Garmin Fishfinder 340C
Garmin Fishfinder 400C
Garmin Fishfinder 80
Garmin Fishfinder 90
Garmin GPSMAP 172 Marine GPS
Garmin GPSMAP 172C Marine GPS
Garmin GPSMAP 176 GPS
Garmin GPSMAP 176C GPS
Garmin GPSMAP 178C Marine GPS
Garmin GPSMAP 276C GPS
Garmin GPSMAP 292 Marine GPS
Garmin GPSMAP 298 Marine GPS
Garmin GPSMAP 376C GPS
Garmin GPSMAP 378 Marine GPS
Garmin GPSMAP 392 Marine GPS
Garmin GPSMAP 398 Marine GPS
Garmin GPSMAP 420 Marine GPS
Garmin GPSMAP 430 Marine GPS
Garmin GPSMAP 440 Marine GPS
Garmin GPSMAP 450 Marine GPS
Garmin GPSMAP 478 Marine GPS
Garmin GPSMAP 492 Marine GPS
Garmin GPSMAP 498 Marine GPS
Garmin GPSMAP 520 Marine GPS
Garmin GPSMAP 525 Marine GPS
Garmin GPSMAP 530 Marine GPS
Garmin GPSMAP 535 Marine GPS
Garmin GPSMAP 540 Marine GPS
Garmin GPSMAP 545 Marine GPS
Garmin GPSMAP 550 Marine GPS
Garmin GPSMAP 555 Marine GPS
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Hardware included with purchase.
|
11.02 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and Diamond Ball Base
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
38.38 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and Diamond Plate
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized short length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
36.97 |
|
|
RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/8" to 5/8" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.56 lbs.
|
37.92 |
|
|
Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/1" Ball, Medium Arm & Diamond Ball Plate
Take your mobile entertainment on the road with the RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a standard length double socket arm and B-sized ball and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions: Accommodates rails 1-1/8" to 1-1/2" in diameter
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.64 lbs
|
38.71 |
|
|
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with B Size 1" Ball, Short Arm and Diamond Plate
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Included is a short double socket arm and a diamond plate for mounting to RAM mounting cradles.
Mounting Base Dimensions:
Accommodates rails 1 1/8” to 1 1/2” in diameter
|
37.26 |
|
|
RAM Base & Ball w/Garmin Mounting Hardware
RAM-202-G2 universal base consists of a 1.5 inch diameter rubber ball, connected at right angles to a 2.5 inch diameter round base. The base has pre-drilled holes, including the universal AMPS hole pattern. The RAM-202-G2 comes with a custom hardware pack for assembly for your Garmin Fishfinder.
The ""U"" in the part number reflects product packaged in poly bag. For additional specifications, see components and drawings tabs.
Ball Size: 1.5 Inch Rubber Ball
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum
|
16.36 |
|
|
PP5050-19 PowerPod Pre-Cut for Garmin GPSMAP® 7xx0/7xx0xsv Series - Carbon Black
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
445.08 |
|
|
PedestalPod 70° Pre-Cut for Garmin GPSMAP® 7412xsv & 7612xsv Series - Carbon Series
PedestalPod 70° models are specifically designed for protection of marine electronics on the bow of sportfishing boats.
PedestalPod 70° models are better than bracket mounting and position electronic displays 12″ above the deck at an ideal 70° viewing angle. The tough and rugged black powder coated aluminum pedestal is 4″ in diameter with a 6.5″ round base, and is designed to accomodate the latest 12″ and 16″ displays. The convenient 360° swivel allows a completely customized position, gives anglers easy access to the fishfinder/chartplotter and allows boat covers to fit over the 70° PedestalPod with ease.
Like all NavPods, 70° PedestalPods are designed to resist impacts, vibration and moisture ingress, and are crafted with a thick gauge, UV-stable acrylic capped ABS material designed specifically to provide structural stability. The NavPod housing incorporates a double gasket system that provides an excellent watertight seal to keep spray off of electrical connections, thus ensuring the reliability and longevity of marine electronics. Electronic displays easily flush mount into the precut housing and all wires and connections are routed internally through the pedestal base.
|
471.26 |
|
|
Items we added today at CLR Marine:
MINN KOTA MK-230 2 BANK X 15 AMPS ON BOARD BATTERY CHARGER
MINN KOTA MK-345 3 BANK X 15 AMPS ON BOARD BATTERY CHARGER
OCEAN LED T3S DRAIN PLUG BLUE UNDERWATER LIGHTING
RAM MOUNT CRADLE FOR GARMIN RINO 610/650
RAM MOUNT CRADLE FOR GARMIN ETREX 10/20/30
RAM MOUNT CRADLE FOR GARMIN MONTANA SERIES
GRACE DIGITAL ECO POD W/ WATERPROOF EARBUDS
GRACE DIGITAL ECO TERRA WATERPROOF IPHONE MP3 STEREO
GRACE DIGITAL ACCESSORY ROCK SPEAKER SINGLE
|
|
|
RAM Lil Buddy™ Adhesive Stick Base Dash Mount with Compatible Garmin G-Ball
Minimalists in design yet incredibly useful is the RAM Lil' Buddy mount. Using an adhesive disk, put the Lil' Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your iPhone, Blackberry, Palm, or MP3 player can be perfectly matched and supported by your new best friend, the RAM Lil' Buddy. Also, for all you Garmin folks, note that the ball on the Lil' Buddy will snap right into the ball receiver on your GPS.
The Lil' Buddy attaches directly to any Garmin GPS Personal Navigation Device with factory mounting bracket that accommodates the Garmin "G-Ball". This mount rotates 180 degrees.
The RAM Lil' Buddy mount is compatible with the following Garmin GPS Personal Navigation Devices:
nuvi 2xx
nuvi 2xxW
nuvi 3xx
nuvi 6xx series
nuvi 7xx series
nuvi 8xx series
StreetPilot i3
StreetPilot i5
Material:
High Strength Composite
Note:
Purchase of product does not include Garmin GPS device or factory mounting bracket. The "U" in the part number reflects product packaged in poly bag.
|
10.27 |
|
|
RAM Flat Surface Mount w/Cradle for Garmin dēzl GPS
RAM Cradle Holder for the Garmin dēzl 560LMT & 560LT:
This RAM high strength composite cradle is designed to hold the following devices:
Garmin dēzl 560LMT
Garmin dēzl 560LT
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Patent pending roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
Surface Mount:
Simply choose your preferred mounting location and the possibilities become endless with the RAM-B-138U. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your device.
Material: Powder Coated Marine Grade Aluminum
|
18.00 |
|