Tatula 200 Baitcasting Reel - TAT200HS  The Daiwa Tatula 200 Baitcast Reel is the answer to many heavier tackle demands. Reinforced Brass Gearing can carry the load of a more powerful quarry and is housed with a Rigid Aluminum Frame and Sideplate. To handle increased torque, a custom 100mm Swept Handle can turn the barrel with greater ease. The handle also utilizes comfortable Soft Touch Knobs. A Matte Black Finish with Red Spider Graphics makes this reel a looker. Well designed for deep cranking, punching, flipping, chatter baits, swimbaits, and working a frog. Deep Spool and generous line capacity. Specifications: BB RB BRGS: 7BB + 1 Gear Ratio:  7.3:1 Line Per Crank:  32.2 Weight (oz):  8.1 Mono Capacity:  12/250, 16/185, 20/150  J-Braid Capcity: 30/190, 40/145  Drag Max:  13.2 Handle:  Right

ProSpec Chrome Blaze Orange Monofilament - 16 lb - 3000 yds - PSC3B16-80 Berkley® ProSpec® Chrome is the result of nearly three years of product and field testing with professional Captains and Guides. This high-tensile strength, co-polymer monofilament is specifically engineered to be highly abrasion resistant -- for all situations which demand added durability. Features: PROFESSIONAL GRADE, ABRASION-RESISTANT, PREMIUM SALTWATER MONOFILAMENT Excellent abrasion resistance High Tensile Strength - Ties powerful knots, outstanding linear strength Designed and tested by top captains WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

V8 Series 200 AMP ANL Fuse - 2 Pack T-Spec high-current fuse protects your equipment and you in the event of an electrical short circuit.  Each of these heavy-duty fuses features a little window through which you can visually check the fuse's status. Features: Nickel plated Status window *Sold as a 2 Pack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sierra replacement engine couplers for OMC Sterndrive, Cobra and Volvo engines.

Provides smooth, super-efficient steering for high performance boats with single or multiple outboards up to 600 Hp combined, including center consoles, cruisers, runabouts and more. Suitable for speeds up to 75 mph and dual helms (with additional helm, hose and fittings). Allows independent engine tilt in dual applications. Dual engines require tie bar kit and extra hardware (sold separately). Features steering lock valves, ORB fittings on helm and cylinder, 5 turns lock-to-lock (single cylinder), compact helm, standard 3/4" tapered shaft. Mounts in 3" dash hole (tilt requires larger cutout). Meets ABYC and NMMA standards. Includes helm, cylinder, fittings, oil, bleeder kit and detailed instructions. Order HO51XX hoses, sold separately.

Bilge Pump - 800/1100 GPH - Non-Automatic The TRAC Outdoor 69301 Bilge Pump is a self priming, 12V centrifugal pump that's ideal for use in all watercraft.  With a cartridge style pump head and universal strainer base, this pump was designed for easy installation and retrofitting.  The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps.  It is ignition protected, can run dry without damage and has a low power draw.  *Float switch not included  Features: Cartridge style pump head Pump body accepts both 3/4” and 1-1/8” screw-on outlets.  Each outlet has an O-ring for easy maneuverability without stripping Strainer base also includes side mounting option for tight spaces Runs dry without damage Meets ABYC, NMMA, Coast Guard and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Discharge Outlet - 3/4" and 1-1/8" Voltage - 12 V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Tele-Sun Carbon Fiber Shade Poles with Carry Bag Extend your time on the water and at the sandbar with the new Tele-Sun Shade Poles! Made from strong, lightweight and flexible Carbon Fiber, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Simply insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 52.89" to 80.4" tall. Features: Lightweight Carbon Fiber material with clear, Awl Grip UV-protection  Built to withstand the harsh marine environments  Easy installation to deck-mounted rod holders with 1/4” pin  Cam cleat allows for easy adjustment of line tension  Open hood feature allows for alternative fabric clamping bungee cord system  Extends from 52.89" to 80.4" Sold as a pair Includes a mesh carrying bag for storage  Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material 1-year limited warranty

Tele-Sun Aluminum Shade Poles with Carry Bag Extend your time on the water and at the sandbar with the new Aluminum Tele-Sun Shade Poles! Made from a strong, lightweight drawn aluminum tube, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Simply insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 44.6” to 69.37” tall. Features: Lightweight drawn and anodized aluminum tube material  Built to withstand the harsh marine environments  Easy installation to deck-mounted rod holders with 1/4” pin  Nylon cleat allows for easy adjustment of line tension  The tip ring feature allows for an alternative fabric clamping bungee cord system  Extends from 44.6” to 69.37”  Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material *Comes as a pair

Marine Outboard Motor Bracket - Aluminum - Max 20HP This adjustable outboard motor bracket is designed for motors up to 20 HP or 115 lbs. Its heavy-duty, light weight aluminum is designed for fresh water use on both powerboats and sail boats. Unit is spring loaded. 11 in. of travel with 5 stops.( Not to be used with 4 stroke engines.) Features: Lightweight design Sturdy, durable aluminum Travel distance of bracket is 11 in. with 5 stops Spring-loaded bracket

B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300 The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials.  Features: Bronze Housing Depth and Temperature Only Usable Shaft Length: 66.5 mm (2.62”) Replacement nut—405 10 m (33’) cable length Boat Size: 8 m (25’) and up Ideal for center-console and trailered boats Frequency: 50/200 kHz Maximum Depth Range: 50 kHz: 800-1200 ft 200 kHz: 400-700 ft Cone: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3-3/8" (85MM) ViewLine Tachometer with Multi-Function Display - 0 to 6000 RPM - Black Dial & Bezel The ViewLine Tachometer is available with or without operating hours counter (digital display) and can be connected to conventional marine engines (no data bus).  One LED warning light is integrated as a standard. Specifications: Various sensor inputs (W, Ind, Hall, Generator) Output for acoustic alert (option) LCD size - 37 mm x 11 mm 8 and 14 pole Tyco / Hirschmann bush housing • Operating voltage 8 – 32 V Accuracy +/- 2.5 % of full scale reading < 175 mA current consumption with an LED warning  light as standard Number of pulses programmable via dip switch  or PC software (ViewLine programming tool)  Anti-fog double lens  Protection rating front IP67, rear IP52  85 mm installation diameter  50 mm installation depth  Operating temperature range -20 °C / +70 °C Reverse polarity protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Platinum 2" Voltmeter (10-16 VDC) Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.   A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. 2" - Hole Size: 2.0625" (53mm) Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N VP7179 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3/4" Double Braid Dock Line - White/Gold with Tracer - 50' Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque balanced construction and a unique stabilization process, which produces this long wearing line that resists kinking. The Double Braided White/Gold with tracer makes for the perfect anchor line.    Applications: Dock line - ≤65' (19.8 M) vessel Anchor line - ≤ 45' (13.7 M) vessel Mooring line - ≤ 35' (10.7 M) vessel  Technical Specifications: Color - White/Gold with tracer Material -  Double braid nylon  Rope Diameter - 3/4" (18mm) Rope Length - 50' (15.2 M) Tensile Strength - 20,500 lb *Sold as an Individual

Signature Series 3i 8.8" Classic Speakers - White  The Signature Series 3i range of premium marine speakers, subwoofers, wake tower speakers, and tweeters delivers crystal-clear audio and withstands marine conditions like never before.   With an enhanced design for the harsh marine environment, the Signature Series 3i range features new marinized connectors and a redesigned grille for easy installation and superior protection.  Incorporating premium materials and superior acoustic engineering, you can enjoy that uncompromisingly pure listening experience on your boat, season after season.  Combining function and style, the Signature Series 3i range is made for life on the water, just like you. Features: Delivers premium sound quality suited for the marine environment  Marinized design with IP65 rating  Designed to optimally work with Fusion stereo systems and amplifiers  True-Marine™ design from Fusion Defined high-fidelity, low-frequency acoustics are a result of the excellent self-damping and bass reproduction  Technical Specifications: Peak Power - 330 Watts RMS Power - 130 Watts Nominal Impedance - 4 ohms Overall Dimensions (Diameter x Depth) - 9.75" x 5.16" (247 x 131 mm) Mounting Depth - 4.13" (106 mm) Sensitivity - 91 dB Weight - 5.8 lbs per speaker (2.62 kg) LED Lighting - No In the Box: One (1) Pair of speakers Mounting hardware Two (2) water-resistant cable assemblies with 2-pin connector (5.9" (150mm)) Instruction manual *Sold as a Pair

LightArmor All-Round Plug-In Light - 36" Premium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles.  The subtle, glare-free black matte finish complements many of today's boat designs. The threaded locking collar fits securely with LightArmor Plug-In Light Bases.  OEM Part Number 5530-36BP1 Features: Impact-resistant polycarbonate lens Water-resistant Corrosion/UV resistant The light head adjusts 15° fore to 15° aft Over 50,000-hour life Technical Specifications: Visibility Distance - 2NM Visibility Field of View - 360° Vessel Size - Up to 39.4' (12 M) Connection - Standard 2-Pin Pole Length - 36" Operating Range - 10.5 to 14.4V DC Certifications: U.S.C.G. *Sold as an Individual