Antenna Cable for Cortex® V1 & M1 Use this 32 ft cable to connect your antenna to your compatible Cortex VHF and AIS. Features: Cable fitted for Cortex® V1 & M1 32' cable

Low Friction Ring - 11mm Hole Low Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and a deep external groove to retain the rope securely within the large shoulders when spliced into a loop. Features: Compact and lightweight Low friction Large shoulder secure allowing for rope lashing Durable Simple and reliable design Low maintenance

Bronze Low-Profile Thru-Hull Medium-Frequency CHIRP Transducer - 1kW, 18° Tilt, 85-135kHz Echonautics presents a range of powerful transducers from Dual Frequency CW to Low/Medium/High CHIRP and digital sensors, with excellent value for money.  Technical Specifications: Frequency - 85-135kHz 1kW Mounting Style - Thru-Hull Material - Bronze 18° Tilt

Replacement Li-Ion Battery for 9555 The Iridium 9555 Li-ion Battery offers up to four hours of talk time for the Iridium 9555 satellite phone. It can be used as a spare for extended travel, or to replace the battery that came with your Iridium 9555 satellite phone. Features: Battery life: up to 4 hours of talk time; 30 hours standby Optimal charging temperature range: 32°F to 104°F (0°C to 40°C) Charging time: 3.25 hours

B258 1kW Bronze Thru-Hull Depth/Temp with FB - 8-Pin Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-22° deadrise angle. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Downrigger Weight Retriever 3025 Great helper and safety precaution for the downrigger fisherman. Brings weights in for rigging lines and releases without heavy-duty long-wearing nylon fairlead. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Auxillary Alarm Designed for all of the Raymarine C-Series and E-Series displays.

Low Friction Ring - 16mm Hole Low Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and a deep external groove to retain the rope securely within the large shoulders when spliced into a loop. Features: Compact & lightweight Low friction Large shoulder secure allowing for rope lashing Durable Simple & reliable design Low maintenance

SR203 VHF Handheld Radio Kit Take your ACR SR203 Handheld Survival Radio by making it fully-functional as an everyday use VHF radio.   By simply replacing the standard Lithium battery with a Lithium Polymer replaceable battery and incorporating the Rapid Battery Charger with adapters, this kit will serve as both an emergency and everyday use system.  With all the bells and whistles, the ACR203 Handheld Radio Kit is an all in one kit. In the box: SR203 Handheld VHF radio (2827) Rechargeable Lithium Polymer battery x one (1) (1062) Rapid Battery charger kit (2815) Instruction manual *Sold as an Individual  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TB-01 T-Bar Mount for GPS/VHF Antenna Mount  The T-Bar can hold up to four GPS/VHF antennas, and can easily be installed onto pushpit rails and decks to provide the perfect installation solution for power and sail boat owners looking for the secure and neat storage of antennas. Features: Designed to fit up to four (4) GPS/VHF antennas The aerial bar can be rotated during installation to determine the ideal position for each antenna. Internal cable routing to ensure a neat appearance once installed. Perfect for mounting onto a variety of surfaces: guard rails or stanchions, 'A' frames and cabin roofs.  Technical Specifications: Material - Stainless Steel Height - 9.36" (238mm) In the Box: Mount Mounting hardware  Installation manual *Sold as an Individual

TP-01 T-Bar Mount f/GPS/VHF Antenna Cost effective mounts for up to four (4) GPS/VHF antennas.  Easy to install and ideal for both sail and powerboats. Features: Designed to fit up to four (4) GPS/VHF antennas The aerial bar can be rotated during installation to determine the ideal position for each antenna. Internal cable routing to ensure a neat appearance once installed. Customisable height Technical Specifications: Material - Stainless Steel Height - 9.36" (238mm) In the Box: Mount Mounting hardware  Installation manual *Sold as an Individual

RA-01 Rail Mount for GPS/VHF Antenna Designed to fit rails of 1" (25mm) in diameter and comes with a watertight seal for additional protection against exposure to the sea.  Features: Internal cable routing allows for internal cable routing to ensure a neat installation Technical Specifications: Material - Stainless Steel Thread - 1" x 14 Thread (TPI) *Sold as an Individual 

Scanpod Slim Helm Pod - Up to 8" Display The Scanstrut Helm Pod is a perfect choice for all cockpit configurations. Usable face -11.4W x 7.5H Features:   Universal Helm Fixing  Fits pedestal rails from 25mm to 33.7mm (0.98" -1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards. Secure & Watertight Install Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry No Drill Fixing Kit Customized U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail. Hassle Free Install & Service  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing. Increased Protection  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time. Supplied Uncut As standard you will receive your Scanpod uncut.

Halo - Flush Mount Down Light - White Finish - Warm White Dimming Class-leading output, weatherproof construction, and the simplest installation in the industry - Lumitec's Halo Flush Mount Down Lights stand apart from the crowd. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system the lights are ideal for salons and staterooms, as well as helm stations, flybridges and hard tops. Fully sealed and IP67 compliant. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs. Choose white or brushed. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 300mA 24V DC Amps: 160mA Correlated Color Temperature: 3000 Color Rendering Index: 90+ Rated Watts: 4 Lumens (White): 120 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 1.99" (5.05cm) Height: 1.99" (5.05cm) Depth: 0.70" (1.77cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flex Trim Length: 25' "A": 3/8" "B": 5/8" Color: Black TACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment. Trim & Moulding Trim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors. Materials Depending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit