|
Voyager 3-Person Inflatable Boat Kit with Oars & Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
600 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
70.93 |
|
|
Sunskiff 3-Person Inflatable Boat
The ideal inflatable boat for pools, lakes, and more!
Features:
525 lbs max capacity
Heavy-duty PVC construction
Grab lines
Integrated oar locks
|
32.45 |
|
|
Sunskiff 3-Person Inflatable Boat Kit with Oars & Pump
The ideal inflatable boat for pools, lakes, and more!
Features:
525 lbs max capacity
Heavy-duty PVC construction
Grab lines
Integrated oar locks
In the Box:
Boat
Oars
Pump
|
45.70 |
|
|
SAE 5-Bolt Pattern Focus Tube w/Dead Band Eliminator
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2" above the top of the tank, allowing accurate level measurement with fluid levels all the way to the top of the tank, and eliminating the 2" deadband of the TLM100/TLM150.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
72.96 |
|
|
CHILLER™ 28-Can Soft-Sided Backpack Cooler - Black
Meet the CHILLER™ 28-Can Soft-Sided Backpack Cooler. Whether you’re bringing drinks to the game or keeping the fam fueled on a hike, this cooler’s easy and comfortable to carry thanks to adjustable and padded shoulder and waist straps. This cooler’s exterior is made from recycled polyester fibers, so you’ll help reduce your impact on the environment.
Features:
Portable: Adjustable padded shoulder and waist straps for easy transport; zippered front and inside mesh pockets for storing ice packs and other extras
Recycled Fabric: Exterior fabric is made from recycled polyester fibers
Leakproof: Welded seams prevent leaks
Superior Ice Retention: TempLock™ Insulation keeps food and drinks cold for 12 hours or more
Capacity: Holds up to 28 cans
Specifications:
Color: Black
Weight (lbs): 2.75
Exterior Height (inches): 18.75
Exterior Length (inches): 12.5
Exterior Width (inches): 3.75
Capacity: 28 Cans
Cooler Cup Holders: No
Cooler Wheels: Yes
|
36.85 |
|
|
CHILLER™ 28-Can Soft-Sided Backpack Cooler - Deep Ocean
Meet the CHILLER™ 28-Can Soft-Sided Backpack Cooler. Whether you’re bringing drinks to the game or keeping the fam fueled on a hike, this cooler’s easy and comfortable to carry thanks to adjustable and padded shoulder and waist straps. This cooler’s exterior is made from recycled polyester fibers, so you’ll help reduce your impact on the environment.
Features:
Portable: Adjustable padded shoulder and waist straps for easy transport; zippered front and inside mesh pockets for storing ice packs and other extras
Recycled Fabric: Exterior fabric is made from recycled polyester fibers
Leakproof: Welded seams prevent leaks
Superior Ice Retention: TempLock™ Insulation keeps food and drinks cold for 12 hours or more
Capacity: Holds up to 28 cans
Specifications:
Color: Deep ocean
Weight (lbs): 2.75
Exterior Height (inches): 18.75
Exterior Length (inches): 12.5
Exterior Width (inches): 3.75
Capacity: 28 Cans
Cooler Cup Holders: No
Cooler Wheels: Yes
|
36.85 |
|
|
Gianneschi SUPER LARIO 2 Bronze Hand Pump 1"
Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 9.2 GPM, Bronze construction, Bronze impeller. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.
|
2540.79 |
|
|
Sundome Dome Tent 7' x 7' - 3 Person
Features:
WeatherTec system with patented welded floor and inverted seams to keep the inside of the tent dry
A ground vent and 2 windows increase air circulation for comfort
Compact dome shape stands up to wind, includes a door awning and rainfly for extra weather protection
Easy set-up with snag-free continuous pole sleeves
Plenty of room for a queen size air mattress. Includes storage pockets to keep small items organized
Easily packs up into an expandable carry bag with a rip strip
Dimensions: 7' W x 7' L Dome Tent
|
79.76 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/2" SHAFT 3 1/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
137.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1 1/2" SHAFT 3 1/2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
137.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 2" SHAFT 3 1/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
137.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 2" SHAFT 3 1/2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
137.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 2 1/4" SHAFT 3 1/2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
196.50 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 2 1/2" SHAFT 3 1/2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
196.50 |
|
|
Maintenance Kit for 30mm Shaft & 1-3/4" Stern Tube
As with any rubber or silicone hose below the waterline, the PSS bellows must be inspected regularly for any signs of wear, aging, or chemical deterioration. PYI recommends that the bellows be replaced once every 6 years. During the bellows replacement, it is also recommended that the O-rings and set screws be replaced, as well as the hose clamps. PYI includes all the necessary replacement parts in the PSS Maintenance Kit.
What's Included:
Bellows (1)
Nitrile O-rings (2)
Set screws (5)
Hose clamps (4)
Tube of Thread Lock (1)
Allen key (1)
Dimensions:
Shaft Diameter: 30mm
Stern Tube Diameter: 1-3/4 in. to 1-7/8 in.
What is the recommended maintenance schedule for the PSS Shaft Seal?
PYI recommends that the bellows be replaced once every 6 years. During the bellows replacement, it is also recommended that the O-rings and set screws in the stainless steel rotor be replaced and the hose clamps. Under most circumstances, the carbon stator and the stainless steel rotor will not need to be replaced.
|
83.26 |
|