|
PVC 40" Post Guide-On with Unlighted Posts & FREE Camo Wet Lands Post Guide-On Pads
This kit includes two PVC 40" Post Guide-Ons With Unlighted Posts and two Camo Wet Lands Post Guide-On Pads. The PVC posts allow you to see the location of your trailer when it's underwater. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware included
Adjusts out to 13" on each Side
Fits Frames up to 3" W x 4-1/4" H
18" high
2" schedule 40 white PVC posts (2-3/8" actual OD)
Stands 40" above the trailer frame with white post caps
Fits trailer frames up to 3" wide x 5-1/4" tall
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27620: C.E. Smith 40" Post Guide-On With Unlighted Posts
Part 27902: C.E. Smith Post Guide-On Pad - 36" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
98.51 |
|
|
60" Post Guide-On with I-Beam Mounting Kit & FREE Camo Wet Lands Post Guide-On Pads
The kit includes two 60" Post Guide-Ons With I-Beam Mounting Kits and two Camo Wet Lands Post Guide-On Pads. These Post Guide-Ons allow you to see the location of your trailer when it's underwater. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware included
Adjusts out to 19" on each side
1-1/2" square. 16 gauge pre-galvanized steel uprights
2-3/8" diameter white PVC posts
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post-guide-on covers: Camo Wet Lands
Kit Includes:
Part 27648: C.E. Smith 60" Post Guide-On With I-Beam Mounting Kit
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width
*Sold in pairs
|
166.60 |
|
|
60" Post Guide-On with Unlighted Posts & FREE Camo Wet Lands Post Guide-On Pads
This kit includes two 60" Post Guide-On With Unlighted Posts and two Camo Wet Lands Post Guide-On Pads. These Post Guide-Ons allow you to see the location of your trailer when it's underwater. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter).
Features:
Mounting hardware included
Adjusts out to 19" on each side
Fits frames up to 3" W x 4-1/4" H
1-1/2" square, 16 gauge pre-galvanized steel uprights
39" high
2-3/8" diameter white PVC posts.
Stands 60" above the trailer frame with white post caps.
Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
The galvanized coating is very thin (0.45 oz. on each side)
The cover-pads are made from strong polyurethane-coated 600D nylon fabric
Covers have nylon closures on each end
Open the bottom and top of the cover-pads to allow LED guide on lamps
Covers contain a 1/2" thick closed-cell polyurethane foam inner pad
Color of post guide-on covers: Camo Wet Lands
Kit Includes:
Part 27640: C.E. Smith 60" Post Guide-On With Unlighted Posts
Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands
*Sold in pairs
|
138.01 |
|
|
53696 Rod Safety Ring
Attach the C.E. Smith Rod Safety Ring to the bottom of rod holders and stop worrying about dropping your equipment.
Made to secure into the 0.5" drain hole found at the bottom of the flush-mount cast-bottom rod holder from C.E. Smith, the rod safety ring gives you a convenient place for you to tether your rod and reel, boat fender, or any other valuable you don't want to fall overboard.
Features:
Provides a convenient place to secure rods
316L Marine-grade stainless steel
Quick and easy installation
*Sold as an Individual
|
7.20 |
|
|
Double Slot Swivel Bolster Bracket Assembly - 13"
C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G.
Features:
Bolster bracket: 12" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 4-3/4"
Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2"
Overall assembly length is 13"
|
7.87 |
|
|
Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with Sleeve
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Horizontal
Fits rails with 1.66" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.84 |
|
|
Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex Key
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Adjustable Mid Mount
Fits rails with 7/8" or 1" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
107.70 |
|
|
Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex Key
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Adjustable Mid Mount
Fits rails with 1-1/4" or 1-5/16" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
107.70 |
|
|
Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex Key
C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.
Features:
Style: Adjustable Mid Mount
Fits rails with 1.66" or 1-1/2" measured OD
Made from Marine Grade Aluminum
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
109.08 |
|
|
Heavy Duty Spare Tire Cover
27410
Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.
Tire Size: 12"
Diameter:21"
Depth:6-1/2"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.60 |
|
|
Heavy Duty Spare Tire Cover
27420
Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.
Tire Size: 13"
Diameter:25"
Depth:7-1/2"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.94 |
|
|
Heavy Duty Spare Tire Cover
27430
Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.
Tire Size: 14"
Diameter:27"
Depth:8-1/2"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.97 |
|
|
Heavy Duty Spare Tire Cover
27440
Strong black vinyl with corded edge and elastic closure for a snug fit. Protects tires or spares from sun and foul weather for years of use. Protects tires from sun and foul weather, Strong black vinyl material, Corded edge and elastic closure.
Tire Size: 15"
Diameter:29"
Depth:9-1/2"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.31 |
|
|
Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - Zinc
Roller shafts blister packed each with two cap nuts.
Features:
Length: 12-3/4"
Max Grip: 12.190"
|
6.91 |
|
|
Grease Seals f/1" to 1-1/16" Straight Spindle
Product Description
Need to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and provide a tight long lasting seal.
Features:
Seal number: 12192TB
For 1" or 1-1/16" straight spindles
Seal land outer diameter: 1.250"
Hub inner diameter: 1.979"
Pack of 2 grease seals
WARNING: This product can expose you to chemicals including CADMIUM which is known to the State of California to cause cancer or other reproductive harm, and di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
5.75 |
|