|
Faux Center Nut Black with 1/2" & 5/8" M12 Base for Cast Steering Wheels
Replacement center cap for Cast Steering Wheels
|
19.48 |
|
|
BURKS 9762-1, SEAL 5/8 VITON
UNSPSC Code: 40150000
|
85.00 |
|
|
RAM 12" Long Double Swing Arm with Open Swivel Single Socket
The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size.
Swing Arm Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
59.90 |
|
|
RAM 75mm X 75mm VESA 3.625" Plate with 1.5" Diameter Ball
This RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. The RAM-2461U is compatible with the following electronic devices:
MobileDemand XTablet T8600
Glacier Computer Ridgeline
Routeware DMS 5000
|
18.42 |
|
|
Cradle for Garmin dezl™ 760LMT, nuvi® 2797LMT & RV 760LMT
The RAM-HOL-GA54U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Lifetime warranty
Made in the U.S.A.
Material: High Strength Composite
Note: *The RAM-HOL-GA54U was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle.
|
25.63 |
|
|
RAM POD I Universal No-Drill Vehicle Mount Connecting to No Ball Base
Part #: RAM-B-316-1U
The RAM-B-316-1U, universal RAM-POD I vehicle mount, consists of a single open socket arm, connected to a 18" long flexible rod. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Installation Instructions:
At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
|
31.39 |
|
|
EZ-Roll'r Cradle for Apple iPad Mini 4
The RAM® EZ-Roll'r cradle for the Apple iPad mini 4 is the most cost effective and simple way to secure the iPad mini 4 in a variety of applications. The RAM-HOL-AP20U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Cradle Features:
Compatible with various iPad cable/docking accessories
Patent pending roller design for super smooth placement and removal of the iPad
High strength materials maximize longevity of cradle
Full access to all ports
Lifetime warranty
Material:
High Strength Composite
Note:
This product is NOT recommended for devices with a Tech Armore Glass Screen Protector.
The "U" in the part number reflects product packaged in poly bag.
|
14.33 |
|
|
RAM-ROD 2000 Fishing Rod Holder with RAM-ROD Revolution Ratchet/Socket System and Round Flat Surface Base
The RAM-114-RBU consists of the RAM-ROD 2000 fishing rod holder, ratchet arm with single open socket and 2.5" diameter round base that contains the universal AMPS hole pattern. Offering the patented RAM rubber ball, socket and ratcheting feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
31.10 |
|
|
EZ-Roll’r™ Cradle for the Apple iPad Pro 10.5
The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro 10.5 secures your device in a form-fit holder that keeps the entire screen visible. Simply slide your iPad into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. The side buttons, camera and charging port are conveniently exposed and accessible.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Features:
Compatible with various iPad cable/docking accessories
Patented roller design for super smooth placement and removal of the iPad Pro
High strength materials maximize longevity of cradle
Full access to all ports
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite
Note:
This product is NOT recommended for devices with a Tech Armor Glass Screen Protector.
The "U" in the part number reflects product packaged in poly bag.
|
17.35 |
|
|
RAM Tube Jr. Rod Holder
Description:
Ideally suited for a wide range of applications and fishing vessels, this rod holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD™ Revolution ratchet arm with single open socket and 2.5" diameter round base with 1.5" ball. Combining the patented RAM rubber ball and socket system with a ratcheting feature; this rod holder has almost infinite adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of the boat or kayak. Rod holder doubles as a stake out pole holder.
Features:
1. Quick release and installation
2. High strength materials ensure product longevity
3. Compatible with all RAM post spline bases
4. Compatible with spinning reels and level wind reels
5. Position spinning reel to the side or under RAM Tube Jr.
6. Compatible with left-handed and right-handed reels
7. Lifetime warranty
8. Made in the U.S.A.
|
28.73 |
|
|
RAM-ROD® 2000 Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™Base
The RAM-114-RB-TRA1U consists of the RAM-ROD® 2000 fishing rod holder, ratchet arm with single open socket and 1.5" Track Ball™ base for any track system including the RAM Tough-Track™. The unique ball and socket with ratcheting feature allows for 360-degree rotation of the rod holder for optimal angle adjustments while on the water.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag
|
32.27 |
|
|
RAM 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Base, STANDARD LENGTH Double Socket Arm & 2.5" Round Base
The RAM-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. For most applications, mount will support up to ten pounds.
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. For mounting a GPS puck antenna to this mount, RAM recommends the RAM-338U
|
50.30 |
|
|
RAM EZ-ROLL'R Model Specific Cradle f/Apple iPad 4, iPad 3 and iPad 2 w/o Protective Case
The RAM-HOL-AP15U consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure when on the go. Multiple AMPs hole patterns found on the back of the cradle, make it convenient for attaching various mounts for perfect articulation and viewing angles. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The RAM-HOL-AP15U DOES NOT contain the patent pending Uni-Conn™ docking connector; however, an open space is allocated for free attachment to various cable/docking connectors.
Specifications/Features
Cradle Features:
1. Compatible with various iPad cable/docking accessories
2. Patent pending roller design for super smooth placement and removal of the iPad
3. High strength materials maximize longevity of cradle
4. Full access to all ports
5. Multiple attachment hole patterns for convenient articulation and viewing angles
6. Lifetime warranty
7. Made in the U.S.A.
Material:
High Strength Composite
|
17.10 |
|
|
RAM EZ-ROLL'R Cradle f/Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE
The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
The EZ-ROLL'R cradle is compatible with the following tablets:
Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE
Specifications:
Docking Cradle: No
Locking Cradle: No
Fits Tablets WITH Cases: No
Fits Tablets WITHOUT Cases: Yes
Low Vibration Environment: Yes
High Vibration Environment: Yes
Cradle Features:
1. Compatible with various iPad cable/docking accessories
2. Patent pending roller design for super smooth placement and removal of the iPad
3. High strength materials maximize longevity of cradle
4. Full access to all ports
5. Lifetime warranty
Material:
High Strength Composite
|
14.36 |
|
|
RAM Suction Cup Mount w/iPad mini EZ-ROLL'R Cradle
The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
The EZ-ROLL'R cradle is compatible with the following tablets:
Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE
Specifications:
Docking Cradle: No
Locking Cradle: No
Fits Tablets WITH Cases: No
Fits Tablets WITHOUT Cases: Yes
Low Vibration Environment: Yes
High Vibration Environment: Yes
Cradle Features:
1. Compatible with various iPad cable/docking accessories
2. Patent pending roller design for super smooth placement and removal of the iPad
3. High strength materials maximize longevity of cradle
4. Full access to all ports
5. Lifetime warranty
Material:
High Strength Composite
Suction Cup Mount Features:
Double socket arm, 3.25" suction cup twist lock base and round base adapter that contains the universal AMPs hole pattern. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.
|
49.60 |
|