EZ-Roll'r™ Holder for Phones with OtterBox uniVERSE Mount your OtterBox uniVERSE-protected iPhone or Samsung Galaxy wherever you need to with this RAM® EZ-Roll'r™. This mount is compatible with any OtterBox uniVERSE phone case–simply pair a B-size arm and base for your intended use case, and you have a vibration-reducing ball and socket mounting system that allows for near-infinite adjustability. Features: RAM® EZ-Roll'r™ cradle designed for phones in an OtterBox uniVERSE case Pair with any B-size arm and base; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Ball Size: B Size (1 in.) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: High-strength composite Weight: 0.21 lb. Compatible Devices: OtterBox: uniVERSE Cases - All Phone Models

RAM® Mount No-Drill™ Laptop Base for '22-23 Toyota Tundra + More The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit the 2022-2023 Toyota Tundra and 2003-2010 Ford Focus perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle. Compatible with RAM® Tele-Pole™ mounting systems to complete your in-vehicle solution. Features: RAM® No-Drill™ base designed specifically for 2022-2023 Toyota Tundra and more Compatible with RAM® Tele-Pole™ mounting systems Made of powder-coated steel Backed by a lifetime warranty Specifications: Hole Pattern (inch): Seat bolt distance-17.75" center to center Materials: Powder-coated steel Packaging Type: Box Weight (lbs): 6.0 lb.

No-Drill™ Laptop Base for the Ford F-150 & Lincoln Mark LT The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Placement of Mount:  Passenger side floor board, under seat Drilling Requirements:  No - uses existing seat bolts Hole Pattern: Seat Bolt Distance: 11.5" center to center Pole:  Purchased Separately Material: Powder Coated Steel Features:  Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. Compatible Vehicles: Ford F-150 (2004-2014) F-150 Crew Cab (2010) F-150 FX2/FX4 (2012-2014) F-150 Harley Davidson (2012) F-150 King Ranch (2012-2013) F-150 Lariat (2012-2013) F-150 Limited (2012-2013) F-150 Platinum (2012-2013) F-150 Raptor (2013) F-150 Regular Cab (2011) F-150 STX (2012-2013) F-150 Super Cab (2011) F-150 Super Crew (2011) F-150 SVT (2013) F-150 SVT Raptor (2012) F-150 XL (2012-2013) F-150 XLT (2013) Lincoln Mark LT (2005-2011) Note: If you are installing this product into a 2009-2010 F-150 with the slide out cup holder, the RAM-VB-109A is the preferred kit. The standard RAM-VB-109 kit will install but limit the use of the cup holder. To use the RAM-VB-109 with the slide out cup holder, pull the cup holder all the way out if you plan to use it prior to installation. Once installed, the cup holder will not be able to slide back under the center console. The RAM-VB-109A has an adjustable riser that can be positioned so that the cup holder is not interfered with. For base model trucks without the slide out cup holder, the standard RAM-VB-109 kit is ideal.

RAM® No-Drill™ Vehicle Base for '20-22 Ford Police Interceptor Utility  The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit the 2020-2022 Ford Police Interceptor Utility. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle. Compatible with RAM® Tele-Pole™ mounting systems to complete your in-vehicle solution. Features: RAM® No-Drill™ base offers low-profile mounting; designed specifically for the 2020-2022 Ford Police Interceptor Utility Compatible with RAM® Tele-Pole™ mounting systems Requires no drilling into the vehicle and installs on the passenger side using the existing seat bolts Made of powder-coated steel Backed by a lifetime warranty Specifications: Hardware Included: Foot Stabilizer Hole Pattern: Seat Bolt Distance 12" Center to Center Materials: Powder Coated Steel

Universal No-Drill™ Vehicle Base The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit a variety of vehicles. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Will this mount install in your vehicle? Learn more by following the steps in the Quick Guide located under the Literature tab. Features: Custom, No-Drill™ mounting base offers lowest profile in the industry Manufactured from high strength steel with a durable powder coat finish If required, high quality fastening hardware is included Mounts using existing seat bolts, no drilling required Specifications: Placement of Mount: Passenger side floor board, in front of seat Drilling Requirements: No Drilling - uses existing seat bolts Seat Configuration: Bucket Pole: Lower Pole included with base Material: Powder Coated Steel Features: 1. Custom, No-Drill™ mounting base offers lowest profile in the industry 2. Manufactured from high strength steel with a durable powder coat finish 3. If required, high quality fastening hardware is included 4. Mounts using existing seat bolts, no drilling required

No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & Tacoma The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.  Features: Material: Powder Coated Steel Placement of Mount: Passenger side on the floor, under front seat Drilling Requirements: None - attaches to seat bolts Seat Configuration: Bucket Pole: Purchased Separately Weight: 9.0 lbs. Note: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. The RAM-VB-138 will not fit bench seat trucks. This base is not compatible with bench seat vehicles.

No Drill Vehicle Laptop Base for Nissan NV1500, NV2500 HD, NV3500 HD & Toyota Tundra The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Features: Installs in minutes with no drilling required Low profile keeps mount away from passenger leg space Adjustable riser included for pole adjustment Specifications: Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board Drilling Requirements: No, attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Material: Powder Coated Steel Features: Quick installtion with no drilling needed, rock solid construction with lifetime warranty Weight: 11.0 lbs Compatible Vehicles: Nissan NV1500 (2011-2015) Nissan NV2500 HD (2011-2015) Nissan NV3500 HD (2011-2015) Toyota Tundra (2007-2015)

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 12" Heavy Duty Aft Mount 12" Tall Aft raked 30 degrees

GAI2 Warm White Dimming - Heavy-Duty Base with Built-In Switch - Brushed Housing Lumitec's best-selling positionable light just got better. Lumitec's enhanced General Area Location (GAI) light now has TWICE the output and a more efficient optical system! GAI's small size, high output and heavy duty machining aluminum base make this light perfect for a wide range of applications: reading light, task light or even a work space light. Completely sealed and IP67 compliant. Features: General Area Location (GAI) light now has TWICE the output and a more efficient optical system High output Heavy duty machining aluminum base with Built-in Switch Completely sealed and IP67 compliant WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GAI2 Warm White Dimming - Heavy-Duty Base with Built-In Switch - White Housing Lumitec's best-selling positionable light just got better. Lumitec's enhanced General Area Location (GAI) light now has TWICE the output and a more efficient optical system! GAI's small size, high output and heavy duty machining aluminum base make this light perfect for a wide range of applications: reading light, task light or even a work space light. Completely sealed and IP67 compliant. Features: General Area Location (GAI) light now has TWICE the output and a more efficient optical system High output Heavy duty machining aluminum base with Built-in Switch Completely sealed and IP67 compliant WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

No-Drill™ Vehicle Base for '07-13 Chevrolet Silverado + More The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Placement of Mount: Passenger side floor board, in front of seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Hole Pattern: Seat Bolt Distance: 15"-15.5625" center to center Pole: Purchased Separately Material: Powder Coated Steel Features: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty Compatible Vehicles Chevrolet Avalanche (2007-2013) Avalanche LS/LT/LTX (2009) Silverado (2007-2013) Silverado 1500 (2007-2013) Silverado 1500 Hybrid (2008) Silverado 1500HD (2008) Silverado 2500HD (2007-2013) Silverado 3500HD (2007-2013) Suburban (2007-2014) Suburban 12-Ton (2012) Suburban 34-Ton (2012) Tahoe (Front Bucket Seats Only) (2007-2014) GMC Sierra (2007-2013) Sierra 1500 (2007-2013) Sierra 1500 Denali (2012) Sierra 1500 Hybrid (2008 2012) Sierra 1500HD (2008) Sierra 2500HD (2007-2014) Sierra 2500HD Denali (2007-2012) Sierra 3500HD (2007-2014) Sierra 3500HD Denali (2007-2014) Sierra Hybrid (2011) Yukon (2007-2014) Hummer H2 (2003-2011)

No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Compatible Vehicles: F-250 (1997-2016) F-350 (1997-2016) F-450 (1997-2016) F-550 (1997-2016) F-650 (1997-2018) F-750 (1997-2018) Excursion (2000-2005) Placement of Mount:  Passenger side floor board, in front of seat DRILLING REQUIREMENTS: No - attaches to seat studs Seat Configuration:  Bucket Pole:  Purchased Separately Material: Powder Coated Steel

No-Drill™ Vehicle Base f/ '13-21 Ford Fusion + More The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Compatible Vehicles: Ford Edge (2007-2013) Edge Limited (2013) Edge SE (2013) Edge SEL (2013) Edge Sport (2013) Fiesta (2015) Fusion (2013-2021) Placement of Mount: Passenger side on the floor, under front seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: Powder Coated Steel Weight: 6 lbs. Features: Quick installation with no drilling needed

No-Drill™ Laptop Base for the Dodge Citadel, Durango & Jeep Grand Cherokee 2011 - 2017 The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Compatible Vehicles Dodge Durango (2011-2021) Jeep Grand Cherokee (2011-2021)

2-7/8" Heavy Duty Mainstay with Swivel Non-removable pedestal system in 2-7/8" offers a heavy-duty base and post for today's larger and faster recreational boats. The base is permanent mold AC7A aluminum alloy with an anodized finish for maximum strength and corrosion protection. Then a 2-7/8" heavy-duty extruded post is pressed and hydra-formed into the base mechanically forming them together. This proprietary process allows maximum strength for a sturdy pedestal. Features: 2-7/8 in. pedestal with 9″ round base Rigid 4-keyed aluminum post, anodized finish Air-powered height adjustment Adjusts (inches) 14" to 19.5" Warranty: 5 years