|
Wire Rope Grip - Size 10 - 10mm(3/8") Diameter Wire
Features:
Used when adjustment in strop length is needed
Stainless Steel
Require no special tools for assembly and can be disassembled and reused
|
11.32 |
|
|
Command Ratchet Hinges - 9-3/8" - Polished 316 Stainless Steel - Pair
Constructed from high-grade stainless steel and brass, our Command Ratchet Hinge is ideal for sunpads, bolsters and lounge backrests. This heavy-duty specialty hinge has a 15-degree locking inclination and ratchets up to four positions.
Features:
Highly polished marine-grade stainless-steel Type-316L
All brass bearings for durability
Meets ABYC H-31 standards class B* application, 250lb ft of torque load for pair
15-degree locking inclination increments starting at 30 degrees
Easily adaptable to many applications
Designed for up to 4" thick cushions
Returns to horizontal position at 100 degrees
Countersunk for #10 fastener or 1/4-20 bolt
Sold in pairs
5-year limited warranty
|
380.63 |
|
|
Teak Louvered Insert
Height:9-3/8"
Width:18"
Depth:3/4"
Cut Out
Height:8-3/8"
Width:17"
Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.
All items have a 1/2" rabbet and use a cutout size one inch less than the listed dimension
|
52.09 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 6" - 5-Pack - Black
Package of 5 Black 6"(15.2cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)
Wire Range: 12-8 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.17 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 12" - 5-Pack - Black
Package of 5 Black 12"(30.5cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)
Wire Range: 12-8 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.58 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 6" - 5-Pack - Red
Package of 5 Red 6"(15.2cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)
Wire Range: 12-8 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.17 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 12" - 5-Pack - Red
Package of 5 Red 12"(30.5cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)
Wire Range: 12-8 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.58 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer)
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6
Universal for any engines and tanks
In-Line Fuel Demand Valve
The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
46.14 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (Pre-1998)
This EPA-certified Attwood Mercury (Pre-1998) Fuel Line Kit reliably delivers fuel to your Pre-1998 Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8893-6
For Mercury Pre-1998 engines and tanks
It also includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant)
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Johnson/Evinrude engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve in this kit
|
46.14 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Johnson/Evinrude Fuel Line Kit reliably delivers fuel to your Johnson or Evinrude engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8889LP6
In-Line Fuel Demand Valve
Hose and tank fittings come with pre-applied thread sealant
Reliably delivers fuel to your Johnson or Evinrude engine
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Johnson/Evinrude Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)
This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Johnson and Evinrude engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
These Attwood Hose Fittings Are Included: Two (2) 8889LP6 hose fittings for the tank end and for the engine end
For Johnson/Evinrude engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit
|
48.43 |
|
|
Yamaha Fuel Line Kit - 3/8" Diameter x 6' Length (No Tank Fitting)
This Attwood Fuel Line Kit is a reliable replacement for the original equipment on Yamaha engines and tanks. The kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
These Attwood Hose Fittings Are Included: A pair of hose fittings 8896LP6 for the tank end and the engine end
for Yamaha engines and tanks
*No Fuel Demand Valve or Tank Fitting is included in this kit
|
48.43 |
|
|
Honda Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Honda engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve is included in this kit
|
49.10 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length
This Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
3/8" x 6' Low Permeation Hose
Universal for any engines and tanks
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Reliably delivers fuel to your engine
*Does not include fittings for the tank end and for the engine end
|
39.74 |
|