Gianneschi CP40-24V Bronze Self-Priming Pump Gianneschi CP40-24V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.75 KW (1 Horsepower), 1500 RPM, 24 Volts DC. Inlet Port is 1-1/2 Inch, Discharge Port is 1-1/2 Inch.   Pump Body: Bronze Impeller: Bronze  Shaft: 316 Stainless Steel Port Size: Inlet Port is 1-1/2 Inch Discharge Port is 1-1/2 Inch Motor Specs : 0.75 KW (1 Horsepower), 1500 RPM, 24 Volts DC.

Gianneschi MAXI SUB 24V Submersible Pump 24V Submersible Bilge Pump for seawater and grey water   Maxi Sub - 24volt   Voltage: 24 V Power: 0,18 kW Max flow: 180 L/min @ 2 m Max head: 8m @ 30 L/min Outlet: 1", female (vertical) Stainless steel shaft (AISI 316) ; ABS open impeller Diameter: 180 mm Height: 290 mm IP rating : IP68

Gianneschi ECOINOX-2-24V SS Self-Priming Pump .37Kw ECOJET Series Jet Pump and Motor unit, 304 Stainless Steel construction, Noryl impeller, 316 Stainless Steel Shaft. Motor is 0.37 KW (0.5 Horsepower), 2900 RPM, 24 Volts DC.

Gianneschi CP26-A1-24V Brz 24V Self Prim Pump  CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 1500 RPM, 24 Volts DC. Inlet Port is 1 Inch, Discharge Port is 1 Inch.   Applications:  Ballast Bilge Diesel oil F.W./S.W. Circulation Fire-fighting Grey water S.W feeding Port Size: From 3/4'' to 1'' 1/2 BSP Pump casing: Bronze Impeller / Gear: Bronze Shaft: Stainless steel  

Gianneschi ECOJET-2B-24V Water System Pump Only

Gianneschi CP26-A2-24V Pump 24V 01Acp2601A2 Main pump features: Best performance/price ratio Compact size with high performance Fast self-priming Side channel and liquid ring construction   Applications:  Ballast Bilge Diesel oil Fresh Water Sea Water Circulation Fire-fighting Grey water Sea Water feeding Port Size: From 3/4'' to 1'' 1/2 BSP Pump casing: Bronze Impeller / Gear: Bronze Shaft: Stainless steel

Gianneschi ECOJET-2BB-24V Bronze Self-Priming Pump

Gianneschi CP20-12V Bronze 12V Self-Priming Pump Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.   The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.

JABSCO 50200-2111 PUMP BRONZE CLUTCH 2A 24V Jabsco Clutch Pump with 1-1/2" British Standard Pipe Threads and Neoprene Impeller. Runs on 24 Volts DC, 2 Groove "A" Belt Pulley.   Electric Clutch Pedestal Mount Pump. British Standard Pipe Threads.   Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 2.4m (7.8ft).

Gianneschi ECOINOX1 24 NEW SS Slf Prim 24 .30Kw

Gianneschi CB 22-95 0.55KW Centrifugal Pump 230V 50/60Hz 1Ph Gianneschi CB-22-95-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.   Applications for the CB2295230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating.

Gianneschi ACB80E-12V Bronze 12V Self-Prime Pump Gianneschi ACB80E-12V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.45KW (0.6 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the ACB80E12V include chain washing, fire fighting, pumping seawater and liquids with a high gas content, diesel and oil pumping, bilges, and any water supplying applications.

Gianneschi CB 22-120 0.75KW Cent Pump 230V 50/60Hz 1Ph Gianneschi CB-22-120-230V, CB Series Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 2900 RPM, 230 volts AC, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.   Applications for the CB 22-120-230V include air conditioning systems, water supply, lifting fresh or salty water at sanitary plants, water circulations, increasing water pressure at water plants, pumping fresh water and seawater, and cooling and heating. Before installation, ensure that mains supply is grounded in accordance with local legislation and corresponds to motor plate detail.

Gianneschi CP26-A1-110V 60HZ Bronze Self Priming Pump Gianneschi CP-26-A1-110V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase. Inlet Port is 1 Inch, Discharge Port is 1 Inch. Pump Body: Bronze Impeller: Bronze Shaft: 316 Stainless Steel Port Size: Inlet Port is 1 Inch, Discharge Port is 1 Inch Motor Specs :0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase.

Gianneschi MV44G-230/400/50 Single Screw Pump Gianneschi MV44G-230V, MVG Series Single Screw Pump and Motor unit, Bronze construction, Buna Nitrile Stator, Stainless Steel Screw Rotor impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 230 volts AC, 50/60 Hz, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.   Applications for the MV44G230V include emptying of Heavy Liquid Tanks Black And Grey Water, Emptying of waste, liquid with small suspended parts. This is a simple pump that consists of a stainless steel rotor screw that turns through a rubber stator and pushes liquid along.