|
Viking Universal Manual Bilge Pump - 38mm
Heavy duty, self-priming, hand-powered bilge pump for nearly any type of installation
Viking Universal's mounting bracket allows for vertical or horizontal surface mounting. With the optional Through Deck kit the pump can be installed behind bulkheads or below the deck. To minimize required space the Viking Universal excels at adaption. The simple switching of the valves together with the connections allows you to choose flow direction. The included KlickTite™ straight and 90° hose connections can be used in combination. The hose connections and even the pump housing can be easily rotated for optimal positioning.
While designed as a powerful bilge pump, the Viking Universal's large 38mm (1-1/2") valves enable the pump to also be used for pumping toilet waste.
Fasteners are included for stowing the handle and the safety clasp ensures that the handle cannot be lost while not in use or during an emergency situation. Viking Universal meets ISO 15083, "Bilge pumping systems".
Specifications:
Body and cover:Polypropylene plastic reinforced with 30% fiberglass
Diaphragm and valves:Nitrile rubber
Wetted parts:PP30GF, PA66 GF30, POM, stainless steel, nitrile rubber
Maximum suction:3M (10')
Maximum head:4M (13')
Combined suction/head:7M (23')
Connection:KlickTite? connectors 38mm (1-1/2") hose. Both straight and 90° bends are included
Max. liquid temp:+60°C (140°F)
Weight:1,5 kg (3.3 lbs)
|
111.11 |
|
|
Amazon Universal Manual Bilge Pump
Features:
Connections: – for 38 mm (1½ “) bore hose
Dimensions: – 240mm long, 210mm wide, 150mm high, with 260mm handle (nominal dimensions for variable pump configuration)
Output: – up to 100 litres/minute (22 gallons/minute)
Flow direction reversible by exchanging inlet and outlet ports
Quick-release clamp ring for rapid disassembly
Optional through-deck kit permits operation from inside or outside the cabin
Push-fit inlet and outlet elbows (1 supplied with pump) increase flexibility of installation
Stainless steel handle with bulkhead clips
Self-priming up to 4m
Packaged Dimensions: L:24.00 x H:16.00 x W:24.00cm
Actual Weight: 1.36 Kg (Approx. 1.86 Kg packed)
|
111.86 |
|
|
Amazon Warrior Manual Bilge Pump
Features:
Connections: - for 38mm (1½”) bore hose
Dimensions: - 365mm long, 200mm wide, 260mm high, with 450mm handle
Output: - up to 135 litres/minute (30 gallons/minute)
Double diaphragm design for maximum efficiency and added safety: each side of the pump can work independently
Stainless steel handle with bulkhead clips
Self-priming up to 6m. Delivery head up to 6m.
Mounts on deck, or through deck (optional kit & bracket)
Packaged Dimensions: L:39.00 x H:31.00 x W:22.00cm
Actual Weight: 4.82 Kg (Approx. 5.32 Kg packed)
|
625.78 |
|
|
Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 500
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 3 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet
|
25.90 |
|
|
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 4 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet
|
41.18 |
|
|
Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 800
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Must be used with appropriate Tsunami outlet
|
42.96 |
|
|
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 5 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet
|
53.88 |
|
|
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24V
The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 24V
Fuse Size: 2 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet
|
50.35 |
|
|
Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12V
This is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.
Kit Includes:
Attwood Tsunami Mk2 500 GPH Pump
Washer / Non-Return Valve
90-degree Outlet
Straight Outlet
3/4" x 5' Pump Hose
3/4" Thru-hull fitting
2-way on/off switch with bezel plate
Snap-It hose clamps
Wire Kit
Installation Kit
Easy Installation & Service
GPH (Gallons Per Hour): 500
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 3 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 3/4" and 1"
*Caution: Bilge pump switches are not external ignition protected
|
54.14 |
|
|
Amazon Bulkhead Manual Bilge Pump
Features:
Connections: – for 25mm (1”) bore hose
Dimensions: – 250mm long, 170mm wide, 120mm high, with 260mm handle (nominal dimensions for variable pump configuration)
Output: – up to 45 litres/minute (10 gallons/minute)
For surface mounting on bulkhead or deck.
Light compact pump.
Ports and bodies can be positioned in 96 different ways for maximum flexibility of installation.
Stainless steel handle with bulkhead clips.
Self-priming up to 4m.
Packaged Dimensions: L:23.00 x H:16.00 x W:21.00cm
Actual Weight: 0.96 Kg (Approx. 1.26 Kg packed)
|
128.47 |
|
|
3-Way Auto/Off/Manual Bilge Pump Switch
Part #: 7615A3
Panel-mounted rocker switches for use with pump that draws 10 amps or less.
Features:
1/4" spade terminals
6-volt through 32-volt D.C. only
10 amps maximum
Plate is 2-13/16" x 1-7/8"
Hole size is 1-1/2" x 7/8"
Caution: Bilge pump switches are not external ignition protected.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.85 |
|
|
March 809 815 Series Mag-Drive Centrifugal Pumps
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze with Base 24VDC High Speed 7.5GPM 1/2"MPT Ports
|
498.00 |
|
|
Primetime Pump 230vac
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump.
The pump is ideal for Marine, Industrial, Agricultural or Commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).
SPECIFICATIONS:
Flow…………………….Up to 21 GPM
Head Feet……………Up to 23’
Housing………………316 Stainless Steel (Investment Cast)
Cover………………….316 Stainless Steel
Impeller……………..316 Stainless Steel Semi-Open
Wearplate………….316 Stainless Steel
Mechanical Seal..Carbon / Ceramic / Viton Bellows
O-ring/Flapper…..Viton
Weight……………...16 lbs
|
769.39 |
|
|
Primetime Pump 12VDC
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).
Applications:
Marine Pump used for Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling
Agricultural pump
Industrial pump
SPECIFICATIONS:
Flow: Up to 21 GPM
Head Feet: Up to 23’
Housing: 316 Stainless Steel (Investment Cast)
Cover: 316 Stainless Steel
Impeller: 316 Stainless Steel Semi-Open
Wearplate: 316 Stainless Steel
Mechanical Seal: Carbon / Ceramic / Viton Bellows
O-ring/Flapper: Viton
Weight: 13 lbs
Motor is painted White
|
684.06 |
|
|
Primetime Pump 24VDC
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).
Applications
Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846)
Agricultural pump
Industrial pump
SPECIFICATIONS:
Flow Up to 21 GPM
Head Feet Up to 23’
Housing 316 Stainless Steel (Investment Cast)
Cover 316 Stainless Steel
Impeller 316 Stainless Steel Semi-Open
Wearplate 316 Stainless Steel
Mechanical Seal Carbon / Ceramic / Viton Bellows
O-ring Flapper Viton
Weight 13 lbs
Motor is painted White
|
671.93 |
|