5115 Fuse A3T (Class T) 175A Features: Extremely fast short-circuit response 20,000 Ampere Interrupt Capacity (AIC) UL listed to standard 248-15 DC Tested to UL standard 198L WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5116 200A Class T Fuse Features: Extremely fast short-circuit response 20,000 Ampere Interrupt Capacity (AIC) UL listed to standard 248-15 DC Tested to UL standard 198L WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fuse Block Class T 225-400 AMP Part #: 5502 Features: Maximum Voltage: 160 Volts DC Maximum Amperage: 400 Amperes DC Maximum Torque: 190 in-lb (21.47 Nm) max. Terminal Stud Size: 3/8"-16 (M10) Mounting Holes: Accept 1/4" (M6) Screw Maximum Cable Size 4/0 AWG Fuse Mounting Blocks: Tin-Plated Copper Class T Fuses Available: 110-400 Amperes DC  Fuse Sold Sepereatly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Block with Insulating Cover - 110 to 200A Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction Stud design ensures secure fuse mounting even with high heat Stainless steel studs provide resistance to corrosion and high torque One-piece stainless flange nuts ensure safe and secure connections UL 94-V0 base resists high heat Specifications: Cable Size: Up to 4/0 AWG Ignition Protected: Yes Maximum Amperage: 200A Maximum Voltage: 160V DC Fuse Mounting Block: Tin-Plated Copper Terminal Stud Size: 5/16"-18 (M8) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Fuse Block with Insulating Cover - 225 to 400A Allows the use of Class T fuses for fast acting circuit protection of inverters and other electronics Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse Insulating cover satisfies ABYC/USCG insulation requirements Cover breakouts allow wire access in any direction Stud design ensures secure fuse mounting even with high heat Stainless steel studs provide resistance to corrosion and high torque One-piece stainless flange nuts ensure safe and secure connections UL 94-V0 base resists high heat Technical Specifications: Cable Size: Up to 4/0 AWG Ignition Protected: Yes Maximum Amperage: 320A Maximum Voltage: 160V DC Fuse Mounting Blocks: Tin-Plated Copper Terminal Stud Size: 5/16"-18 (M8) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

400A Class T Replacement Fuse Specifications: Individual Fuse Amps: 400A Fuse: 400A Weight: 0.2 (lbs) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in) Dimensions: 7.6 x 3.2 x 3.2 (cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

400A Class T Fuse Block Accessory Kit Specifications: Amps: 400 Amps Fuse: 400 Amps Weight: 1 (lbs) Weight: 0.45 (kg) Dimensions: 7 x 2 x 2.25 (in) Dimensions: 17.8 x 5.1 x 5.7 (cm) Applications: Inverter Accessories WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Class T Replacement Fuse - 200 Amp 200-amp replacement fuse for Samlex CFB2-400 fuse block assembly. Features: Individual 200-amp replacement fuse Applications: Inverter Accessories Specifications: Amps: 200 amps  Fuse: 200 A  Weight: 0.2 (lbs.) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in.) Dimensions: 7.6 x 3.2 x 3.2 (cm)

Class T Replacement Fuse - 400 Amp 400-amp replacement fuse for Samlex CFB2-400 fuse block assembly. Features: Individual 400-amp replacement fuse Applications: Inverter Accessories Specifications: Amps: 400 amps  Fuse: 400 A  Weight: 0.2 (lbs.) Weight: 0.09 (kg) Dimensions: 3 x 1.25 x 1.25 (in.) Dimensions: 7.6 x 3.2 x 3.2 (cm)

  "X-Class" Radars Just Got A Power Boost! Introducing The New DRS12AX 12kW & DRS25AX 25kW DRS Radar Sensors     With the 2016 introduction of the DRS6AX X-Class Radar, Furuno raised the bar on performance for traditional X-Band recreational Radar. We're now driving that bar up a couple more notches with two new, high-power X-Class Radar options for NavNet TZtouch and TZtouch2, as we introduce the new DRS12AX and DRS25AX, High-Power X-Class Radars.   X-Class Radars deliver incredibly high performance, at an extremely competitive price, while also featuring improved short range definition and impressive long range detection. A dedicated "Bird Mode" is integrated into all X-Class Radars, providing fantastic bird detection performance, even at extended ranges. Best of all, these new High-Powered X-Class Radars can be added to any NavNet TZtouch or TZtouch2 network.       Here are some at-a-glance features and pricing for the DRS12AX & DRS25AX X-Class Radars:   -Newly designed gearbox pedestal is 20% lighter and quieter than previous models, and is compatible with original DRS antenna arrays -True Target Trails feature easily identifies moving targets such as birds & vessels on TZtouch MFDs -Fast Target Tracking instantly provides target vectors and speed info for up to 30 targets -1.2 microsecond long-range pulse length is 50% longer than the original DRS sensors, providing better tracking of birds and other long-range targets -Choose from 3.5', 4' or 6' Open Array to meet any installation requirements -Simplified installation with no requirement for an external Power Supply on 24VDC vessels (optional 12V-24V DC Converter available) -Works with TZtouch v5.01 or above (available early next week) and TZtouch2 v4.01 or above software (available now) -Enhanced Bird Mode detects flocks of birds at long ranges -Multiple bolt-patterns on gearbox offer flexibility for new-builds and retrofits Compatible with NavNet TZtouch and TZtouch2 (not compatible with NavNet 3D or earlier NavNet models)       Specials   Closeouts    Remanufactured    Rebates  

Lynx Smart BMS 500 Battery MGMT System for Lithium Smart Batteries The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature-rich and complete option. Features: Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch Battery monitor, indicating the state of charge percentage and more data. Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell. Bluetooth for use with our VictronConnect App, for setup and monitoring. Local and remote monitoring using a Victron GX device, for example, the Cerbo GX. The Lynx Smart BMS is part of the modular Lynx distribution system. Please contact your dealer for any returns, repairs or support issues related to this product.

Lynx Distributor A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.   Contains a positive and negative bus-bar and provides a connection for 4 individual DC equipment circuits, loads or DC groups. It has a space for individual DC fuses per DC group.  There is an optional feature of an LED for each fuse to indicate if fuse is blown. If you wish to use the fuse indication LEDs on the Lynx Distributor, it also requires a connection to a Lynx Shunt. The Lynx Shunt contains the necessary wide input (8 to 70VDC) power supply to output the required 5V (4,5V-5,5V) power requirement of the Lynx Distributor circuit board. RJ11 fly leads are used to connect the Lynx Shunt to the Distributor. This RJ11 cable is supplied with the Distributor in the box. There are two ports on the Lynx Shunt, and it is possible to use either. When all is OK, only the central LED is green; when a fuse has blown (or is missing) the central and blow fuse circuit LEDs turn red. If you are not using all connection points in your DC distribution, it may be necessary to fit dummy fuses to extinguish the red LEDs Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

Lynx Shunt VE. Can The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built in battery monitor accurately monitors the state of charge of your battery.  The Lynx shunt contains a positive bus-bar with space to mount a CNN fuse and a negative bus-bar with a shunt. It also contains battery monitoring electronics. The Lynx shunt can send via the VE.CAN bus battery monitoring information to a CCGX or VGX or to a third party CANbus monitoring system, such as a NMEA2000. The CCGX, VGX or third party display acts as battery monitor display and is also used to set up the built-in battery monitor. The Lynx shunt is available with a VE.Can connection.   Fuse CIP140325000 - Fuse CNN 325A/80V for Lynx shunt, or alternatively a CNN fuses by Littlefuse can be used. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

MagCode Power Clip for Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Port) MagCode Power Clip is a connection cable for the Victon's Blue Smart IP65 Chargers. Features: 12V 15 amp max *Requires Victon’s MagCode Power Port Please contact your dealer for any returns, repairs or support issues related to this product.

MagCode Power Port for Blue Smart IP65 Charger - 12V - 15 Amp Max (Requires Power Clip) MagCode Power Port is a magnetic connector for Victon's Blue Smart IP65 Chargers. Specifications: Volt: 12V Max Amp: 15 *Requires Victon’s MagCode Power Clip Please contact your dealer for any returns, repairs or support issues related to this product.