|
Magnetic Tool Holder - 3 Place
The Magnetic Tool Holders securely hold your tools. Mount one in your boat and you'll never be tripping over or searching for your tools again. Three models to choose from allows you to customize your tool's configuration. Mount the single on your console for pliers and triple near the back seat where serious work needs to be done.
Features:
Securely Store Tools Where You Need Them
Mount anywhere in Boat, Fish House, Shop, Any Flat Surface
1, 2, or 3 Tool Models
Durable Collar & Magnetic Backer
Includes Screws or High-Strength Bonding Tape for Easy Installation
*Tools not included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
21.68 |
|
|
50A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 50
Remote Control: 900-RC
Weight: 9.0 (lbs)
Weight: 4.1 (kg)
Dimensions: 13.03 x 9.60 x 3.82 (in)
Dimensions: 331 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
445.22 |
|
|
80A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 80 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC 60 Hz or 230 VAC 50 Hz
Output: 12 VDC
Amps: 80
Remote Control: 900-RC
Weight: 9 (lbs)
Weight: 4.1 (kg)
Dimensions: 15 x 9.61 x 3.82 (in)
Dimensions: 381 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
632.32 |
|
|
25A Battery Charger - 24V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 25 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit, reverse polarity and thermal overload protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC or 230 VAC
Output: 24 VDC
Amps: 25
Remote Control: 900-RC
Weight: 9 (lbs)
Weight: 4.1 (kg)
Dimensions: 13.03 x 9.6 x 3.82 (in)
Dimensions: 331 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Test bench
Automotive
Marine
Communications sites
Battery back-up systems
Hobby
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
441.41 |
|
|
40A Battery Charger - 24V - 2-Bank - 3-Stage w/Dip Switch & Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 40 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
Switch mode technology for high efficiency, lightweight and quiet operation
Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
Can charge 2 banks of batteries simultaneously, no isolator necessary
Can be used as a power supply or DC UPS when used in conjunction with a battery
User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
Voltmeter and Ammeter for monitoring
Fan cooled based on output current
Protections: Short circuit, overload, reverse battery connection and over temperature
Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
Input: 120 VAC or 230 VAC
Output: 24 VDC
Amps: 40
Remote Control: 900-RC
Weight: 9 (lbs)
Weight: 4.1 (kg)
Dimensions: 15 x 9.61 x 3.82 (in)
Dimensions: 381 x 244 x 97 (mm)
Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
Warranty: 2 Year Limited
Applications:
Automotive
Recreational vehicles
Marine
Communications sites
Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
632.32 |
|
|
Lowrance Ghost Trolling Motor - Now In Stock at CLR Marine !
Quiet by name, powerful by design, the Lowrance Ghost freshwater trolling motor helps anglers fish longer, run faster, and move in closer without spooking fish. Ghost’s revolutionary propulsion technology and brushless motor generate the most thrust and the longest run time of any trolling motor on the market. With integrated Lowrance sonar options, GPS anchoring, and a three-year warranty, there’s no reason not to believe in Ghost.
Own Your Spot - Ghost’s powerful and precise anchoring lets you anchor your boat on a waypoint, at your current location, or anywhere on the map – regardless of wind conditions – so you can spend more time fishing and less time maintaining your position. With a simple press of your foot, you can lower or raise your Power-Pole® shallow-water anchor or anchor at your current location using the quick access keys built into the Ghost foot pedal.
Total Integration - Steer your boat, adjust your speed, set up route navigation, or anchor at your current location with full touchscreen control from HDS LIVE, HDS Carbon, and Elite Ti2 displays. Our Pro Team anglers asked us to build a trolling motor with full integration capability, including a foot pedal that could serve as an extension of the display’s user interface. We listened – delivering an all-everything pedal with easily accessible Anchor and Heading Mode quick access keys, plus programmable shortcut keys that can be used for saving waypoints and controlling Power-Pole shallow water anchors.
Additional Key Features:
Reliable
Silent Operation
Fastest Top-End Speed
Total Integration with HDS LIVE, HDS Carbon, and Elite Ti²
Fly-By-Wire Steering
Plug-and-Play Lowrance sonar
Configurable Foot-pedal
Interference Free
Flexible Installation
360° Breakaway Mount
Easy to Stow and Go
Specials Closeouts Remanufactured Rebates
|
|
|
IN STOCK! Garmin Force™ Freshwater Trolling Motors & Accessories
Garmin's Force™ Freshwater Trolling Motors and accessories are now in stock. Garmin brings aboard the most powerful and most efficient trolling motor available. Check it out today!
Move your fishing to a higher level with force. The Force trolling motor is the most powerful and most efficient trolling motor available. Wireless chartplotter connectivity provides navigation, autopilot and anchor lock features. Use the precise anchor lock to hold your boat in the same location while you fish. Force includes a convenient wireless foot pedal that provides instant control and responsiveness yet feels and steers like a cable-steered pedal. See more fish and structure clearly with integrated Ultra High-Definition scanning sonar. It also includes a handheld remote control with a built-in sunlight-readable display. The remote gives you complete control of the trolling motor and simple point-and-go gesture steering.
Specials Closeouts Remanufactured Rebates
|
|
|
Fish with force using the Force™ trolling motor. It's the most powerful, most efficient trolling motor available yet still extremely quiet. Wireless chartplotter connectivity provides navigation, autopilot and anchor lock capabilities. Use the precise anchor lock to hold your boat in the same location while you fish. The Force™ motor also includes built-in CHIRP traditional and Ultra High-Definition sonar that provides exceptionally clear images with imperceptible sonar noise interference from the motor. The highly efficient brushless motor operates at either 24V or 36V and uses less energy than the competition, so you can fish longer. It includes a wireless foot pedal that provides instant control and responsiveness — yet feels and steers like a cable-steered pedal. The handheld remote control allows you to navigate with simple point-and-go gesture steering.
Specials Closeouts Remanufactured Rebates
|
|
|
Riptide PowerDrive™ 55 Trolling Motor with Wireless Remote - 12V - 55LB - 54"
Riptide PowerDrive has been counted on for years by saltwater anglers who want reliable performance with smart boat control features. With a tough, sleek mount and an arsenal of reliable innovations, it's not tough to see why. Nobody outworks a Riptide.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor, and when it's time to move, it stows easily and securely.
Advanced GPS Trolling System
The most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from Powerdrive's simple and straightforward micro remote.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Advanced Corrosion Protection
Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
One-Boat Network Enabled Riptide PowerDrive 55 lb. 54" Motor, Wireless Remote, Lanyard, MKP-37 Prop and Mounting Hardware
Specifications:
For Use In: Saltwater
Shaft Length: 54"
Voltage: 12
One-Boat Network Compatible: Yes
QUEST Series: No
Spot-Lock: Yes
Built-In Sonar: None
Foot Pedal Style: Not included
Control: Wireless remote
Auto/Stow Deploy: No
Power Trim: No
Power Steering: Yes
Lift-Assist: No
Bowguard: No
Wireless Remote: Yes
i-Pilot Link (GPS): No
i-Pilot (GPS): No
AutoPilot: Yes
CoPilot: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 50
Mount Style: Bolt-On
Mounting Location: Bow-Mount
Motor Style: Electric-steer
Prop: Power Prop (MKP-37)
Warranty: Two-Year Warranty
|
1839.14 |
|
|
PowerDrive™ 55 Trolling Motor with Micro Remote - Dual Spectrum CHIRP - 12V - 55LB - 54"
Reliable. Capable. And fully able to handle anything a day of fishing brings. PowerDrive™ shows up at the launch ramp every day with big-time technology, trusted power, and easy operation. Also, comes with a mount that's tough, sleek, and built to take a beating, it's going to keep showing up day after day.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.
Advanced GPS Trolling System
The most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set Spot-Locks, control speed and steering, and more. Minn Kota makes boat positioning and controls automatic, and you can take command from Powerdrive's simple and straightforward micro remote.
Built-In Dual Spectrum Chirp Sonar
Keeps your transducer and wiring completely concealed and protected running everything through the trolling motor's shaft. By covering a wide range of frequencies, Humminbird®'s CHIRP produces more accurate, more detailed returns of fish, structure, and the bottom than traditional sonar.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
One-Boat Network Enabled PowerDrive 55 lb. 54" Motor, Micro Remote, MKP-37 Prop and Mounting Hardware
Specifications:
For Use In: Freshwater
Shaft Length (inch): 54"
Max Thrust (pounds): 55 lbs.
Voltage: 12
One-Boat Network Compatible: Yes
QUEST Series: No
Spot-Lock: Yes
Built-In Sonar: Dual Spectrum CHIRP
Foot Pedal Style: Not included
Control: Wireless remote
Auto/Stow Deploy: No
Power Trim: No
Power Steering: Yes
Lift-Assist: No
Bowguard: No
Wireless Remote: Yes
i-Pilot Link (GPS): No
i-Pilot (GPS): No
AutoPilot: Yes
CoPilot: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 50
Mount Style: Bolt-on
Mounting Location: Bow-mount
Motor Style: Electric-steer
Prop: Power Prop (MKP-37)
Warranty: Two-Year Warranty
|
1342.07 |
|
|
Riptide PowerDrive™ 55 Trolling Motor with Micro Remote - 12V - 55LB - 54"
Riptide PowerDrive has been counted on for years by saltwater anglers who want reliable performance with smart boat control features. With a tough, sleek mount and an arsenal of reliable innovations, it's not tough to see why. Nobody outworks a Riptide.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor, and when it's time to move, it stows easily and securely.
Advanced GPS Trolling System
The most-trusted navigation system in fishing. Powerdrive uses GPS to control your trolling motor with unrivaled features that keep you on the fish. Set spot locks, control speed and steering, and more. Minn Kota makes boat positioning and control automatic, and you can take command from Powerdrive's simple and straightforward micro remote.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Advanced Corrosion Protection
Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
One-Boat Network Enabled Riptide PowerDrive 55 lb. 54" Motor, Micro Remote, Lanyard, MKP-37 Prop, and Mounting Hardware
Specifications:
For Use In: Saltwater
Shaft Length: 54"
Voltage: 12
One-Boat Network Compatible: Yes
QUEST Series: No
Spot-Lock: Yes
Built-In Sonar: None
Foot Pedal Style: Not included
Control: Micro remote
Auto/Stow Deploy: No
Power Trim: No
Power Steering: Yes
Lift-Assist: No
Bowguard: No
Wireless Remote: Yes
i-Pilot Link (GPS): No
i-Pilot (GPS): No
AutoPilot: Yes
CoPilot: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 50
Mount Style: Bolt-On
Mounting Location: Bow-Mount
Motor Style: Electric-steer
Prop: Power Prop (MKP-37)
Warranty: Two-Year Warranty
|
1600.55 |
|
|
Trolling Motor Power Receptacle
Use this to add a 70A power receptacle to a Force® trolling motor.
Compatible Devices:
Force® Kraken trolling motor
Force® trolling motor
|
35.98 |
|
|
12 Volt trolling motor plug and receptacle with two prong connection. 8 gauge wire, 6" length. Packaged.
|
19.99 |
|
|
24 volt trolling motor plug and receptacle with three prong connection. 8 gauge wire, 6" length. Packaged.
|
24.99 |
|
|
12 volt trolling motor plug and receptacle. 6", 8 gauge wire. Display packaged.
|
22.99 |
|