|
Zinc Wedge Anode for 35-300 HP Mercury/Mariner Engines
Tecnoseal Zinc Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt water. Mercury part number 826134.
|
7.02 |
|
|
Aluminum Wedge Anode for 35-300 HP Mercury/Mariner Engines
Tecnoseal Aluminium Wedge Anode for Mercury/Mariner 35-300 HP engines. Wedge anode located on the side of the gear housing just above the cavitation plate. For use in salt or brackish water. Mercury part number 826134.
|
4.96 |
|
|
ENGINE PARTS
From Sierra, Arco Marine, and CDI Electronics.
We can no longer ship engine parts internationally or, to California due to Prop 65.
|
|
|
|
|
|
Arco Marine
Proven dependability makes ARCO the trusted source for OEM quality or better alternators, inboard starters, outboard starters, and tilt/trim motors. Nearly 60 years ago, ARCO set the gold standard for marine engine parts. They test and retest every unit manufactured beyond normal operating conditions. That's how ARCO knows they deliver the highest quality, most reliable parts available.
Any returns for a defective product will take 90+ days. As it has to be sent back to the manufacturer. for varification.
|
|
|
Outboard Fuel Line Issues
We could not start our outboard engine. WHAT'S WRONG??
Our outboard engine usually always starts on the first pull and it is not flooded.
Trying to pump fuel through the squeeze bulb was a waste of time as fuel would not fill the bulb. Take the line off the engine and put a screw driver in the end and sometimes it would pump fuel and sometimes it would not. So you have to figure it is an issue with the hose or the bulb. All fittings were factory tight and when the hose was submerged in water no air bubbles when squeezing the bulb. Let's just replace the hose. We got lucky and got the dinghy started. Off to the local chandlery we go, it was about a mile walk from the dock. We were towed back to the boat because again we could not get the outboard started.
This is our second fuel hose on a two year old engine. Anyway I removed the fittings without a lot of work and reinstalled them on the new hose with new clamps. The outboard is now starting on the first pull again.
About three weeks have gone by, we are now having starting issues again. Now what? I pull the spark plugs out and the engine is not flooded. That leaves a fuel issue again. I start playing with the fuel line again, it can not be this, I'm saying to myself. I pull off the engine side of the fuel line from the bulb and nothing seems wrong. Put that back together and take the tank end of the hose off the bulb. There's an issue, I can't blow through it.
So I pull off the tank fitting, there it is, about a ½” in you can see something blocking the hose. So I cut off about 3 inches of that end, I still could not blow through it. Cut off another 3 inches and found that same looking blockage twisted up in the hose. What is this junk, this $50.00 fuel hose is garbage. This time I have a new idea, can I pull this blockage out? I was able to get hold of enough of that stuff to pull it all out of the hose. It's a plastic liner and was twisted in several spots. I ran some fuel through the hose without the liner, now to get rid of the glue that was used to keep the liner in place and then the engine ran fine.
Hose three, that's what I said hose number three. This has to be a fluke so I bought another new hose and will change it out the next time I have an issue. Well later is here and guess what. The outer hose on this new replacement has shrunk some and the thin plastic liner is sticking out both ends of the new hose. That hose was almost $65.00 as we were again in another country.
I have since replaced the Outboard Fuel Hose with Automotive Fuel Hose and put a plastic wire loom over it to protect it from the UV rays. I'm just hoping the squeeze bulb I reused does not have a liner in it. So far so Good two months later, our outboard starts on the first pull.
Closeouts Rebates Remanufactured Specials
|
|
|
Our major distributor has started posting expected delivery dates for the items we sell. We hope to have that available to our customers very soon.
We have also added a few new product lines, Otter Products, RepairTech, Sierra and VEI Oceanview.
We have dropped Quicksilver parts due to a 12% increase in our cost. To take carry of that lack of powerboat parts we have added the Sierra line which is a direct replacement for Quicksilver. We will be adding the complete Sierra Catalog in PDF version to our site soon.
We have slowly been updating the Universal Engine Parts, with photos and descriptions when available.
Remember if you don't see what you are looking for ask us, we can probably get it for you.
|
|
|
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Black Plastic Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.
Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
Automatic nozzle shutoff 4-18 gpm
Black Composite finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels
|
73.73 |
|
|
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.
Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
Automatic nozzle shutoff 4-18 gpm
Stainless Steel finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels
|
100.38 |
|
|
Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.
Features:
All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
Fits 1-1/2 (inch) fill hose
Designed and tested to prevent water from entering the fuel system
Compatible with Ethanol blended fuels
Stainless Steel finish
EPA / CARB Certified
Dual 1 psi overpressure relief safety valves built into the deck fill caps
Automatic nozzle shutoff 4-18 gpm
|
68.76 |
|
|
360® Marine™ - 1 Gallon
CLEANS THE FUEL SYSTEM TO IMPROVE PERFORMANCE
STA-BIL 360® MARINE™ use it with every fill up to help keep your engine running cleaner, leaner, smoother and stronger than ever.
USAGE DIRECTIONS:
1oz treats up to 10 gallons (38 liters) of fuel. Product does not contain alcohol. Perfect for use in all boats, jet skies, and other watersport engines.
5-IN-1 MAXIMIZER HELPS TAKE PERFORMANCE OVER THE TOP
PREVENT ETHANOL DAMAGE: Protect your entire fuel system against damaging rust and corrosion caused by moisture and ethanol fuels. Provides a protective coating on ALL the metal parts of the entire fuel system and combustion chamber, even when the engine is not running.
INCREASE POWER: Strip away carbon buildup, gum and varnish that can inhibit engine performance, and get the most out of your fuel by burning it more completely. Bring back the power your engine once knew. Clear and prevent harmful gum, varnish and buildup throughout the combustion chamber and injectors.
MAXIMIZE FUEL ECONOMY: Burn fuel more completely and efficiently by preserving the fuel system and engine.
Features:
America’s #1 Ethanol Treatment
Use for storage or use at every fill-up and keep marine fuel fresh for up to 12 months
Effective in Non-Ethanol marine fuels
Cleans the fuel system to improve performance
Increases power and fuel efficiency in marine fuel systems & engines
Use in your boat, jet ski, or any water sport engines
Ultimate treatment and protection formula for ethanol and condensation
Made in the U.S.A.
WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
76.60 |
|
|
360® Marine™ - 1 Gallon *Case of 4*
CLEANS THE FUEL SYSTEM TO IMPROVE PERFORMANCE
STA-BIL 360® MARINE™ use it with every fill up to help keep your engine running cleaner, leaner, smoother and stronger than ever.
USAGE DIRECTIONS:
1oz treats up to 10 gallons (38 liters) of fuel. Product does not contain alcohol. Perfect for use in all boats, jet skies, and other watersport engines.
5-IN-1 MAXIMIZER HELPS TAKE PERFORMANCE OVER THE TOP
PREVENT ETHANOL DAMAGE: Protect your entire fuel system against damaging rust and corrosion caused by moisture and ethanol fuels. Provides a protective coating on ALL the metal parts of the entire fuel system and combustion chamber, even when the engine is not running.
INCREASE POWER: Strip away carbon buildup, gum and varnish that can inhibit engine performance, and get the most out of your fuel by burning it more completely. Bring back the power your engine once knew. Clear and prevent harmful gum, varnish and buildup throughout the combustion chamber and injectors.
MAXIMIZE FUEL ECONOMY: Burn fuel more completely and efficiently by preserving the fuel system and engine.
Features:
America’s #1 Ethanol Treatment
Use for storage or use at every fill-up and keep marine fuel fresh for up to 12 months
Effective in Non-Ethanol marine fuels
Cleans the fuel system to improve performance
Increases power and fuel efficiency in marine fuel systems & engines
Use in your boat, jet ski, or any water sport engines
Ultimate treatment and protection formula for ethanol and condensation
Made in the U.S.A.
WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
291.06 |
|
|
Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.
Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Automatic nozzle shutoff 4-18 gpm
Stainless Steel finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels
|
100.38 |
|
|
Brunswick Marine says humbug to your Christmas shopping.
At the close of business today all the Brunswick Marine warehouses will be closed until January 4th.
All orders that CLR Marine receives during this time will be processed right away to get our customer in the queue. Your order will ship as soon as the warehouse is reopened. These warehouses do not ship our electronics and most of our engine parts.
We hope that everyone enjoys our new look and finds your search for the right marine product easier. We have decided that we will only add an item to a subcategory if it has a picture and description, except for the category “Boat Systems”. Please be sure to look for the product under the manufacturer's name as well.
The following companies have announced their next price change this is just the ones we do know of. If you would like to save some money this is your advanced warning.
Remember we have also lowered our prices until January 2nd so get your order in now.
Vendor Name
Next Prc Chg
MP Pump, div Lionheart Venture
1/1/2010
Aurora-Hydromatic (Pentair)
1/1/2010
Crane (Burks)
1/1/2010
Decko Products
1/1/2010
Edson International
1/1/2010
Finish Thompson, Inc
1/1/2010
Giant Industries
1/1/2010
Globe (Barco)
1/1/2010
Gorman Rupp
1/1/2010
March Manufacturing
4/1/2010
Weg Electric Corp.
1/1/2010
R.H. Diesel Parts Inc.
1/1/2010
Ultra Safety Systems
1/1/2010
Tuthill (pump division)
1/1/2010
Shurflo, div Pentair
1/1/2010
Mastry Engine Center
1/1/2010
SeaLand, div. Dometic Corp.
1/1/2010
Raritan Engineering
1/1/2010
Price Pump
1/1/2010
Perko
1/1/2010
Cummins Power South LLC
1/1/2010
Seal Distributers, Inc
1/1/2010
Capt. Charles Reed
CLR Marine LLC
http://www.clrmarine.com
|
|
|
360® Marine™ - 10oz
CLEANS THE FUEL SYSTEM TO IMPROVE PERFORMANCE
STA-BIL 360® MARINE™ use it with every fill up to help keep your engine running cleaner, leaner, smoother and stronger than ever.
USAGE DIRECTIONS:
1oz treats up to 10 gallons (38 liters) of fuel. Product does not contain alcohol. Perfect for use in all boats, jet skies, and other watersport engines.
5-IN-1 MAXIMIZER HELPS TAKE PERFORMANCE OVER THE TOP
PREVENT ETHANOL DAMAGE: Protect your entire fuel system against damaging rust and corrosion caused by moisture and ethanol fuels. Provides a protective coating on ALL the metal parts of the entire fuel system and combustion chamber, even when the engine is not running.
INCREASE POWER: Strip away carbon buildup, gum and varnish that can inhibit engine performance, and get the most out of your fuel by burning it more completely. Bring back the power your engine once knew. Clear and prevent harmful gum, varnish and buildup throughout the combustion chamber and injectors.
MAXIMIZE FUEL ECONOMY: Burn fuel more completely and efficiently by preserving the fuel system and engine.
Features:
America’s #1 Ethanol Treatment
Use for storage or use at every fill-up and keep marine fuel fresh for up to 12 months
Effective in Non-Ethanol marine fuels
Cleans the fuel system to improve performance
Increases power and fuel efficiency in marine fuel systems & engines
Use in your boat, jet ski, or any water sport engines
Ultimate treatment and protection formula for ethanol and condensation
Made in the U.S.A.
WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
7.97 |
|