|
Explore E3 XFM Ultra Underwater Light - Color Scroll
Technologically advanced and super-efficient. Explore is the ultimate choice of underwater light series.
The Explore E3 has the most advanced optics available on the market. These optics are designed exclusively by OceanLED and offer a truly striking 90° surface beam angle with a focused 20° side beam producing a blade of light under the water that penetrates further, illuminating a larger area with minimal loss.
The ultra low profile outer face of the housing is designed for vessels wanting to go fast and have no impact on the speed or flow of water over the hull, perfect for the sides or running surfaces.
Features:
Superior light distribution due to advanced, generation optics
Available in single, dual or full RGBW color scroll models
Inbuilt driver for easy installation
90° top beam - A true wide-angled, focused beam lights up a large area of water, flooding it with light
20° side beam - A true wide-angled, focused beam lights up a large area of water, flooding it with light
Rectangular beam
5,000 Fixture Lumens - Best-in-class performance from this ultrabright light makes it the obvious choice for those who want to stand out from the crowd
Compact Design - The compact size and built-in driver mean less space is required inside the vessel, allowing installation in tight areas
Reduced Installation Time - All aspects of this design make installation quicker and simpler
Simple Toggle Control - Changing to Fish-Strobe or selecting a color on the RGBW model is a simple toggle of the power switch
Fish-Strobe Mode - Exceptionally bright, randomized strobing of the light is proven to attract more bait and catch more fish
Same Light Output as Sport Series - E3 can be mixed with Sport series lights
Sport can be used on transom and E3 along the sides where the flush mount is preferred
Specifications:
Warranty: 3 years
|
1319.99 |
|
|
Ocean Scout 640 NTSC 640 x 512 Handheld Thermal Night Vision Camera - Black
Ocean Scout is a rugged, compact thermal night vision camera that lets you see other vessels, landmarks, buoys, and floating debris in total darkness.
Now with a high-resolution LCD display and FLIR's latest generation thermal sensor technology, Ocean Scout makes your time on the water safer and more relaxing.
Ocean Scout Features:
Enhanced Awareness - See marine traffic and navigation aids at night
Quickly scan your surroundings for other vessels
Easily recognize buoys in river channels or open water
Detect key landmarks like islands or docks
Steer Clear - Navigate with confidence day or night
Avoid obstacles, such as rocks, floating logs, and other debris
Be aware of kayakers, personal watercraft, and small boats without lights
Detect marine mammals above the water surface
Stay Safe - A lifesaving tool for a "man overboard" emergency
Locate the body heat of anyone in the water
Quickly identify overboard people and pets
InstAlert™ mode highlights the hottest objects in red
Specifications:
Zoom Button: 2x, 4x and 8x
Field of View (H x V): 18° x 14° NTSC
Detector Type: 640 x 512 VOx Microbolometer
Rating: IP67 Submersible
Display: 640 x 480 LCD Display
|
2257.07 |
|
|
SR-L Series Marine 20" Black LED Lightbar - White Light with Red Halo
Accent lighting is an easy way to customize the look of any boat or vehicle, and RIGID now offers a way to add style and function with the SR-L Series Light Bar. This 20 inch Light Bar offers users the latest LED technology paired with advanced optics to provide an ultra-wide 70-degree beam pattern suitable for lighting up the trail ahead.
The halo provides a stylish accent color to any custom vehicle build, while the hidden mounting hardware and glossy outer trim further adds to the light bar’s sleek look. The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
A 3-position switch is included, allowing the user to easily switch between the halo accent lighting to the forward-projecting light.
The SR-L Marine Series Lightbar offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series Lightbar makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Wide beam with firm cutoff on lower edge for minimum reflection
Accent light can be used for low level ambient lighting
|
599.99 |
|
|
Pro Series 3.0 2" 850nm Infrared Pod Light - Flood Optics - Black Housing
The Infrared Small LED POD by Black Oak LED offers the perfect combination of power and size. These IR vehicle light PODs emit infrared light at 850nm and allow an extreme increase in visibility with night vision optics and cameras. This tactical LED light POD has the extreme IP69K durability to match such high-performance LEDs and allows users to have total confidence that their gear is up for any mission.
*Do not stare directly into IR lights.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Technical Specifications:
Dimensions with Mounting Bracket (Width x Height) - 3.2" x 3.8"
In the Box:
Infrared POD light
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
121.50 |
|
|
2" 940nm Infrared Pod Light - Flood Optics - Black Housing
The Infrared Small LED POD by Black Oak LED offers the perfect combination of power and size. These IR vehicle light PODs emit infrared light at 940nm and allow an extreme increase in visibility with night vision optics and cameras. This tactical LED light POD has the extreme IP69K durability to match such high-performance LEDs and allows users to have total confidence that their gear is up for any mission.
*Do not stare directly into IR lights.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Technical Specifications:
Dimensions with Mounting Bracket (Width x Height): 3.2" x 3.8"
In the Box:
Infrared POD light
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
121.50 |
|
|
6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base Plate
Get the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.
Extra Security
No visible bolts on the camera mounting plate provide extra security and improved aesthetics.
Small Base Footprint
This mount is the perfect solution for installations where space is limited.
|
360.00 |
|
|
Caprera3 Spreader Light - White Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.16 |
|
|
Capri3 Spreader Light - White Dimming - Black Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
121.24 |
|
|
2" LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
The Cree flood light pod by Black Oak LED offers two levels of power to fill any need users might possibly have. This CREE LED floodlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed.
Cree and Osram are the biggest names on the LED market for a reason. The Cree flood lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, this CREE LED floodlights is ready to go.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Fog light replacements
Bow light's on flats boats with trolling motor
Lower A-Pillar ditch lights on UTV's and trucks
Trailer lighting
Front bumper lights
Auxiliary motorcycle lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
116.10 |
|
|
2" LED Pod Light - Spot Optics - Black Housing - Pro Series 3.0
This Cree spot light pod by Black Oak LED offers 40 watts of total power. Also, this CREE LED spotlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed.
Cree and Osram are the biggest names on the LED market for a reason. The Cree spot lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, these CREE LED spotlights are ready to go. This 40w Cree POD light is the perfect Jeep JK windshield lights, and Black Oak created a sick light kit for your off-roading adventures (sold separately).
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spot lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Fog light replacements
Bow light's on duck boats with trolling motor
Lower A-Pillar ditch lights on UTV's and trucks
Trailer lighting
Front bumper lights
Auxiliary motorcycle lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” pod light with spot optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
116.10 |
|
|
Modular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2 - Black
The Seaview ADABLANKBLK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.
King Starboard
Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The result is a clean-looking installation.
|
201.60 |
|
|
HD-TVI Waterproof Mini Bullet Color Camera - Black Housing - 3.6mm Lens - 30' Cable
Features:
Underwater operation to a maximum 30' depth
Additional analog output for 960H
Full OSD operation through onboard UTC (up the coax)
IP67 compliant, weather resistant
5 year warranty
|
177.00 |
|
|
2" LED Pod Light - Diffused Optics - Black Housing - Pro Series 3.0
The Diffused Cree LED Light POD by Black Oak LED Offers maximum power using Cree's 10 watt XM-L2 LEDs at an incredible 120 degree beam angle! The truck POD light delivers extreme IP69K durability to match such high performing LEDs allowing users to have the confidence their lights are going to perform when needed.
Cree and Osram are the biggest names on the LED market for a reason. They put out more light and more power at such an extreme level. Users won't believe that much light came from an LED so tiny. This 2-inch LED lights mount virtually anywhere and with all the hardware needed in box, this light is ready to go. Black Oak's 40w Cree POD lights are the perfect Jeep JK windshield lights, and Black Oak created a sick light kit for the off-roading adventures.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Diffused lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Rear bumper lights
Deck or spreader lights
Bed lights for loading and unloading
Site or area lighting
Hunting stand or decoy setup
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” pod light with diffused optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
116.10 |
|
|
2" Flush Mount LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
135.00 |
|
|
2" Flush Mount LED Pod Light - Diffused Optics - Black Housing - Pro Series 3.0
Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. If users are looking at a reverse light or a light for the rear bumper, the diffused option is the perfect set up, throwing light out in a 120° pattern! The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Diffused lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with diffused optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
135.00 |
|