SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars Sitex - RADARpc 3.5/4.5 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

APT-LB-GPS2-01 PowerTower® Center Mounted Light Bar and Wing Plate f/2 Antenna Installs navigation light in the center and provides two (2) antenna mounts for maximum visibility and performance. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 19.76" (502mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual

APT-LB-01-BLK PowerTower® Center Mounted Light Bar - Black Installs navigation lights above the antenna for maximum visibility and performance. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual

DRS12ANXT/4 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS25ANXT/4 Radar Pedestal 4' Array - 15M Cable The high-power NXT solid-state Radar options for NavNet TZtouch2 and TZtouch3. These radar options pack serious power and include several Furuno exclusive features: Target Analyzer™ highlights targets in red or green to indicate potential danger, Fast Target Tracking™ displays target vectors in mere seconds, ARPA displays and tracks up to 100 targets in a single sweep, Bird Mode automatically adjusts gain and sea settings to help you find those feathered friends, and Rain Mode turns storm cells blue so you can easily navigate around the weather. Works with NavNet TZtouch2/Tztouch3 MFDs. The high-power DRS12A-NXT and DRS25A-NXT are 100W and 200W respectively. Features: High-power 100W (DRS12A-NXT) or 200W (DRS25A-NXT) Solid State Radars for NavNet Tztouch2 and Tztouch3 Utilize 3.5-foot, 4-foot, or 6-foot Open Array antennas Target Analyzer™ shows dangerous targets approaching your boat by automatically changing their color to red Fast Target Tracking™ displays a targets speed and course vector in only seconds after acquiring Bird mode works automatically adjusting the gain & sea settings for optimal visibility Rain Mode isolates rain cells, so that you can clearly see your targets Exceptional short-range detection Furuno DRS Radars are available in bundled kits that include the DRS Radar, Antenna, and signal cable. Models ending in /3 include the XN10A/3 antenna. Models ending in /4 include the XN12A/4 antenna. Models ending in /6 include the XN13A/6 antenna. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4° Wedge for 10x10 Base This Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate. Features: Pre-drilled mounting holes allow for quick and easy installation Made from marine-grade polymer

SC111 PowerTower® Starboard Mounted Bar f/GPS/VHF/Navtex Antenna Mounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.   Works with standard 1” x 14 TPI thread. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 12.5" (318mm) Mount Position - Starboard side In the Box: Antenna bar Instruction manual *Sold as an Individual

SC112 PowerTower® Port Mounted Bar f/GPS/VHF/Navtex Antenna Mounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.   Works with standard 1” x 14 TPI thread. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 12.5" (318mm) Mount Position - Port side In the Box: Antenna bar Instruction manual *Sold as an Individual

APT-GPS-01 PowerTower® Center Mounted Bar f/GPS/VHF/Navtex Antenna Mounts GPS, VHF and Navtex antennas above the radar for maximum visibility and performance.   Works with standard 1” x 14 TPI thread. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: Designed for the installation of GPS antenna and ‘Whip’ type VHF, HF/SSB, AM/FM, and cellular antenna of up to 1m in height All mounting holes predrilled for easy retrofit installation, attach using mounting bolts.  No extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 12.48" (404mm) Mount Position - Center In the Box: Antenna bar Instruction manual *Sold as an Individual

APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar Mounts Central light bar for all forward learning PowerTowers® Compatible with: Scanstrut forward leaning PowerTower® radar mounts Features: All mounting holes are predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual

SC110 PowerTower® Port Mounted Light Bar  Installs navigation lights above the antenna for maximum visibility and performance. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height 16.1" (410mm) Mount Position - Port side In the Box: Light bar Instruction manual *Sold as an Individual

APT-LB-01 PowerTower® Center Mounted Light Bar Installs navigation lights above the antenna for maximum visibility and performance. Compatible with: Scanstrut aft leaning PowerTower® radar mounts Features: All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - Aluminum  Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual

Self Levelling Radar Mount - Pole Our Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features Sealed system - entirely maintenance free Universal adjustable base able to rotate through 360° and angle from horizontal all the way to vertical Supplied with two support modules - a deck strut and rail stand off for maximum fore / aft and sideways support Fits to angled decks, narrow swimming steps and steeply sloping transoms Unique pole extrusion with two cable channels with cover strips to hold cables in place Easily removed for racing or winter storage, leaving just low profile deck on deck Existing SC100 Pole Mount installations can be upgraded to self levelling with our upgrade kit Dimensions 2.5m / 8.3' pole 3" diameter pole Base diameter of just 80mm / 3.1" Materials Finest quality machined and anodised aluminium head unit ? lasts the lifetime of your yacht Marine grade 316 stainless steel cradle and base plate Marine grade 6082 aluminium pole - polyester powder coated for a durable and gloss white finish Kit includes 1 x Pole (complete with 2 x cable cover strips) 1 x Adjustable base 1 x Levelling head unit and cradle with plate 1 x 1200mm / 3.9' deck strut 1 x Rail stand off for 25mm / 1" rail

Self Levelling Radar Mount - Pole Our Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Using our own fine-tuned hydraulic damping system, the radar mount reacts to major changes in heel angle of the boat whilst eliminating all small oscillations. Features Sealed system - entirely maintenance free Universal adjustable base able to rotate through 360° and angle from horizontal all the way to vertical Supplied with two support modules - a deck strut and rail stand off for maximum fore / aft and sideways support Fits to angled decks, narrow swimming steps and steeply sloping transoms Unique pole extrusion with two cable channels with cover strips to hold cables in place Easily removed for racing or winter storage, leaving just low profile deck on deck Existing SC100 Pole Mount installations can be upgraded to self levelling with our upgrade kit Dimensions 2.5m / 8.3' pole 3" diameter pole Base diameter of just 80mm / 3.1" Materials Finest quality machined and anodised aluminium head unit ? lasts the lifetime of your yacht Marine grade 316 stainless steel cradle and base plate Marine grade 6082 aluminium pole - polyester powder coated for a durable and gloss white finish Kit includes 1 x Pole (complete with 2 x cable cover strips) 1 x Adjustable base 1 x Levelling head unit and cradle with plate 1 x 1200mm / 3.9' deck strut 1 x Rail stand off for 25mm / 1" rail