4.75" Square Base with VESA (4 x 75mm) (4 x 100mm) Hole Patterns & 1.5" Ball Plate Hole Patterns: 100 x 100 VESA Pattern 75 x 75 VESA Pattern 100 x 50 Half VESA Pattern Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Features: Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.59 lbs.

RAM Double Socket Arm with Locking Knob for 1.5" Ball Bases The RAM-201LU, standard double socket arm with locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball Bases The RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Double Socket Arm for 1.5" Ball Bases The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

Vertical Mounting Base with Double 6" Swing Arm and Swivel Single Socket for 1.5" Balls Features: Weight: 3.45 lbs. Double 6" Swing Arm Swivel Single Socket Made specifically for 1.5" balls

1.5" Ball Adapter for John Deere Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Compatibility: Compatible with the GS2600 & GS2630 John Deere displays Weight: 0.4 lbs.

Triple 1.5" Ball Base Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.64 lbs.

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round Base The RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" Ball Flat Surface Mount w/ Short Double Socket Arm, 2.5" Round Base and Diamond Base The RAM-138U-B consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, short double socket arm and diamond base adapter. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 5.225" Material: Powder Coated Marine Grade Aluminum Ball Size 1.5" Rubber Ball Size

1.5" Ball Mount with 2.5" Round Base, Short Arm & 2" x 4" Plate for the Humminbird Helix 7 Only The RAM-202-24-B-202U, powder coated marine grade aluminum mount, consists of a short double socket arm mount, one round 2.5" diameter round base with the universal AMPS hole pattern and one 2" x 4" rectangular base. The unique rubber ball and socket technology dampens shock and vibration while offering high adjustibility to achieve the perfect viewing angle. Features: Compatible Devices: Humminbird Helix 7 Overall Length: 5.225" Weight Capacity: Up to 10 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.1 lbs.

RAM 6.25" x 2" Universal Electronics Base with 1.5" Ball The RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM-ROD 2000 Fishing Rod Holder with 1.5" Ball The RAM-117BU consists of the RAM-ROD 2000 fishing rod holder and patented 1.5" diameter rubber ball. With the combination of the patented RAM rubber ball and socket system you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

POD No-Drill™ Vehicle Mount with Netbook Tray & 1.5" Ball This kit includes the RAM-234-6 with the RAM POD I with a 1" diamter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt. Tray Dimensions: Tray Depth: 6.0" Tray Thickness: 1" Tray Width (Expansion): 8.56" to 11.12" Side Clamp Arm Height: 2.75" max Features: Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag

1.5" Ball "Rugged Use" Composite Mount f/Lowrance Elite-5 & Mark-5 Series Fishfinders The RAP-101U-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends this mount for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.

1.5" Ball "Rugged Use" Mount f/Garmin echo 200, 500c, & 550c The RAP-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.