|
Series 40 Ball Bearing Block - Single - Universal Head
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Low friction Acetal or Torlon® bearing system
Lightweight
Cheek cut-outs for easy bearing maintenance
Captive Lock™ universal head
Slotted pin shackle eliminates fouled lines
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. Stabilized Acetal sheaves
Acetal ball bearings
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
Pin Ø: 5mm(3/16")
M.W.L.: 350kg(770lbs)
B. L.: 1,000kg(2,200lbs)
Weight: 70g(2.5oz)
|
23.54 |
|
|
Series 40 Ball Bearing Block - Single - Stand Up
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Low friction Acetal or Torlon® bearing system
Lightweight
Cheek cut-outs for easy bearing maintenance
Captive Lock™ universal head
High static and dynamic load capacity
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. Stabilized Acetal sheaves
Acetal ball bearings
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
M.W.L.: 350kg(770lbs)
B. L.: 800kg(1,7600lbs)
Weight: 71g(2.5oz)
|
31.68 |
|
|
Series 30 Ball Bearing Block - Single - Loop Top
Features:
Low friction 2-stage ball bearing system provides consistent performance over the full working load range
High static and dynamic load capacity
Light weight
Versatile head fittings
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction
Can be fitted with a shackle in either of two planes to allow correct alignment of the block
Applications:
Primary lead blocks on dinghies and catamarans
Control lines on larger yachts
Materials:
U.V. stabilized Acetal sheaves
Acetal ball bearings
Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks
Grade 316 stainless steel load straps and head fittings
Specifications:
Sheave Ø: 30mm(1-3/16")
Max. Rope Ø: 8mm(5/16")
M.W.L.: 300kg(660lbs)
B. L.: 750kg(1,650lbs)
Weight: 28g(1.0oz)
|
15.66 |
|
|
Series 40 Orbit Ball Bearing Exit Block
The Series 40 ball-bearing Orbit Blocks™ provides the perfect balance of strength, performance, and reliability. They offer class-leading dynamic and static load ratings, the highest available in this size of performance blocks. Lightweight and strong toughened glass fiber reinforced nylon cheeks replace stainless steel straps used in traditional utility blocks - the perfect balance of performance and reliability.
As well as traditional single swivel blocks, the range also includes single and double sheave lashing or soft attachment options through to multiple sheave blocks including those with quad and quin sheaves. The range is extremely versatile allowing a multitude of possible systems right up to a 12:1 purchase mainsheet system for off-the-beach performance catamarans.
Series 40 Orbit Blocks™ are fitted with our carbon-reinforced C-Cleat™ for secure rope holding with low entry and exit efforts, and fairleads for fast action from any angle. Cleat arms are made from stainless steel and are adjustable for setting to your preferred cleating angle.
Ball Bearing versions incorporate our 2-stage bearing system using ball bearings to minimize friction and a secondary full-contact bearing to maintain low friction across the full working load range.
High Load versions are designed specifically for any application where high dynamic or static loads are expected. They feature a high-strength grade 2205 stainless steel sheave & hub together with a triple bearing race to maintain low friction at very high loads.
Features:
Class-leading dynamic and static load ratings, highest in their class
Lightweight, yet strong. Toughened, glass fiber reinforced nylon replaces stainless steel straps used in our traditional utility blocks
Low friction 2-stage ball bearing system for efficient and effortless trimming
Soft attachment, lashing, and traditional swivel shackle head options
Low profile and compact
High performance cleating
Applications:
Mainsheet systems and spinnaker sheets on dinghies, OTB catamarans and sportsboats to 8m (26ft)
Halyard, vang and backstay applications on boats to 9m (30ft)
Control line applications on larger yachts
Specifications:
Sheave Ø: 1-9/16 in.
Max. Rope Ø: 3/8 in.
M.W.L.: 880/1760 lb.
B. L.: 4410 lb.
Weight: 9.5 oz.
|
83.33 |
|
|
Jabsco Sp2701-15 Outer Bearing Seal
|
7.71 |
|
|
BURKS 8988, GASKET FLAT COMP 7 7/16 OD
|
12.62 |
|
|
BURKS 08988 Gasket Kit 7-7/16"OD
|
12.62 |
|
|
IWAKI G0020, BEARING FOR GX-15 SIC
|
413.27 |
|
|
Flex Chrome Insert 15/16" x 17/32" - 100'
Features:
Denser substrates provide more robust protection
Authentic “chrome” finish
Durable materials will provide years of maintenance-free service
Pairs with V11-9970 SuproFlex Rub Rail
Made in the USA
5-year limited warranty
|
310.10 |
|
|
Snap Hook - Length 3-15/16"
Features:
Grade 316L forged snap hook
Various applications onboard
Outstanding working and breaking loads
Modern design
Applications:
Various uses onboard: fastening applications
Specifications:
Materials 316L stainless steel grade
Length (inch) 3 15/16"
Working load (lb) 2460
Breaking load (lb) 3300
Weight (lb) 0.41
A (inch) 5/8"
B (inch) 33/64"
|
59.56 |
|
|
HR Safety Snap Hook - 100mm Length - 3-15/16"
Features:
HR 17.4 PH stainless steel grade forged snap hook
Various applications on board
Outstanding working and breaking loads
Modern design
Applications:
Various uses on board: fastening applications
Specifications:
Materials: HR 17.4 PH stainless steel grade
Working load: (lb)3700 / (kg) 1680
Breaking load: (lb) 8810 / (kg) 4000
Weight: (lb) 0.368 / (g) 167
Dimensions:
A: (inch) 43/64" / (mm) 17
B: (inch) 35/64" / (mm) 14
Length: (inch) 3 15/16" / (mm) 100
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
High Resistance (HR)
*Sold as an Individual
|
73.09 |
|
|
Myers Pumps 25882A546 Venturi .546 Hole 3-15/16
Myers 25882A546 Venturi, for use with Model HJ75S, Series HJ
|
51.03 |
|
|
Hypro 7560N-R, Roller Pump Ni-Resist Rev
Ni-Resist 8-Roller Pump w/ Super Rollers, Super Rotor, Viton Seals, 20.1 GPM, 300PSI, 1000RPM, 3/4" NPT, 15/16" Shaft
Performance Information
Max. flow: 12 gpm/45.4 lpm at 540 rpm
Max. flow: 22.5 gpm/85.2 lpm at 1000 rpm
Max. pressure: continuous 100 psi/6.9 bar
Max. pressure: intermittent 300 psi/20.7 bar
Max. rated speed: 1000 rpm
Max. fluid temperature: 140°F/60°C
Other Attributes
Rollers: Super Rollers standard (Poly, Teflon and Buna-N available)
Housing: Cast Iron, Ni-Resist or Silvercast
Port sizes: 3⁄4" NPT
Shaft: 15⁄16" solid
Shaft rotation: CW
1" hose barb inlet fitting for 1000 rpm operation
Shaft Seals: Viton standard (Buna-N available)
Available PTO adapters
Rotor: Cast Iron, Ni-Resist and Silvercast
Recommended PTO torque arm kit 3430-0540
|
636.39 |
|
|
HR Snap Shackle Webbing Swivel - 100mm Length - 3-15/16"
Features:
HR Forged snap shackle (Grade 17.4 PH stainless steel) with webbing swivel.
Its flat design allows attaching a webbing
Free rotation of the snap shackle thanks to the swivel eye
The plunger pin is set captive into the hook and cannot become detached
Excellent working and breaking loads
Easy to open by pulling the plunger pin (possible to attach a lanyard)
Applications:
Snap shackle applications
Applications requiring a free rotation of the snap shackle (for a better sail orientation)
Specifications:
Materials: HR 17.4 PH stainless steel grade
Working load: (lb) 2820 / (kg) 1280
Breaking load: (lb) 8480 / (kg) 3850
Dimensions:
A: (inch) 53/64" / (mm) 21
B: (inch) 1 37/64" / (mm) 40
Length: (inch) 3 15/16" / (mm) 100
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
High Resistance (HR)
*Sold as an Individual
|
107.32 |
|
|
316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 5/8"–15/16" Clamping Range - 10-Pack - SAE Size 8
Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.
Features:
The screw head is 7mm
Long service life and safety for most general-purpose hose applications and connections
Recommendations:
Measure hose O.D. before selecting clamp size for proper fit
Double clamp on each hose end for critical applications
Construction:
Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick
Screw Drive: 316 Stainless Steel 7.0 mm screw head
Specifications:
SAE Size: 8
Hose Inner Diameter: (inch) 3/8" – 1/2"
Clamping Range: (inch) 5/8" – 15/16" / (mm) 15-24
Recommended Torque Inch lbs: 25-35
|
16.37 |
|