|
Wire Rope Grip - Size 3 - 3mm(1/8") Diameter Wire
Features:
Used when adjustment in strop length is needed
Stainless Steel
Require no special tools for assembly and can be disassembled and reused
|
3.74 |
|
|
V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope Diameter
V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.
Features:
Lightweight and corrosion proof
Greater abrasion resistance than traditional plastic cleats
Low, snag free profile
Base profile suits mounting on flat and curved surfaces
Applications:
Control lines on dinghies and catamarans
Material:
PTFE impregnated, glass and carbon fiber composite cleats
|
6.96 |
|
|
V-Cleat Open - Small - 3-6mm(1/8" - 1/4") Rope Diameter
V-Cleats are a simple solution to cleating lines under moderate loads.
Features:
Lightweight and corrosion proof
Greater abrasion resistance than traditional plastic cleats
Low, snag free profile
Base profile suits mounting on flat and curved surfaces
Applications:
Control lines on dinghies and catamarans
Material:
PTFE impregnated, glass and carbon fiber composite cleats
|
6.96 |
|
|
XD Telescoping Aluminum Outrigger Poles
For use on sport fishing boats up to 40 feet.
Features:
Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignment
Larger tube diameters and wall thicknesses for increased strength and durability
Anodized cold draw tubes inside and out for maximum protection from corrosion
Double-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less ‘hole wallowing’
Redesigned rings and tips
316 Stainless Steel polished eyelets
UVI marine grade thermoplastic internal bushings for trouble free sliding operation
Double ¼” cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pin
UVI thermoplastic butt sleeves to 􀆓 t all 1-1/2" top and center rigger mounts
Retracts to under 6’ for trailering, bridges and storage
Includes a handy, heavy duty mesh storage bag
Sold as pair
3-Year Limited Warranty
Specifications:
Length: 15'
Base OD: 1-1/8"
Color: Silver
|
404.33 |
|
|
XD Telescoping Aluminum Outrigger Poles
For use on sport fishing boats up to 40 feet.
Features:
Tigress Track® Internal Tracking System, now with dual-tracks for increased tube strength and guiding alignment
Larger tube diameters and wall thicknesses for increased strength and durability
Anodized cold draw tubes inside and out for maximum protection from corrosion
Double-locking and polished 316 Stainless Steel push-buttons on the lower tube sections for less ‘hole wallowing’
Redesigned rings and tips
316 Stainless Steel polished eyelets
UVI marine grade thermoplastic internal bushings for trouble free sliding operation
Double ¼” cross-holes in the butt ends in much thicker wall in anodized aluminum for the push-in-pin
UVI thermoplastic butt sleeves to 􀆓 t all 1-1/2" top and center rigger mounts
Retracts to under 6’ for trailering, bridges and storage
Includes a handy, heavy duty mesh storage bag
Sold as pair
3-Year Limited Warranty
Specifications:
Length: 15'
Base OD: 1-1/8"
Color: Black
|
404.33 |
|
|
FINISH THOMPSON A101761-1 PVDF IMPELLER 6 1/8"
|
512.00 |
|
|
Series 40 Ball Bearing Block - Single - Universal Head
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Low friction Acetal or Torlon® bearing system
Lightweight
Cheek cut-outs for easy bearing maintenance
Captive Lock™ universal head
Slotted pin shackle eliminates fouled lines
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. Stabilized Acetal sheaves
Acetal ball bearings
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
Pin Ø: 5mm(3/16")
M.W.L.: 350kg(770lbs)
B. L.: 1,000kg(2,200lbs)
Weight: 70g(2.5oz)
|
23.54 |
|
|
Series 40 Ball Bearing Block - Single - Stand Up
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction. The 2-stage ball bearing system provides consistent performance over the full load range.Captive Lock™ universal head can be fixed in either of two planes, or free to swivel as required.
Features:
Low friction Acetal or Torlon® bearing system
Lightweight
Cheek cut-outs for easy bearing maintenance
Captive Lock™ universal head
High static and dynamic load capacity
Applications:
Mainsheet
Halyard
Vang
Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26')
Materials:
U.V. Stabilized Acetal sheaves
Acetal ball bearings
Impact and U.V. resistant, fiber reinforced Nylon cheeks
Grade 316 stainless steel load strap and head fitting
Specifications:
Sheave Ø: 40mm(1-9/16")
Max. Rope Ø: 10mm(7/16")
M.W.L.: 350kg(770lbs)
B. L.: 800kg(1,7600lbs)
Weight: 71g(2.5oz)
|
31.68 |
|
|
Series 30 Ball Bearing Block - Single - Loop Top
Features:
Low friction 2-stage ball bearing system provides consistent performance over the full working load range
High static and dynamic load capacity
Light weight
Versatile head fittings
Sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction
Can be fitted with a shackle in either of two planes to allow correct alignment of the block
Applications:
Primary lead blocks on dinghies and catamarans
Control lines on larger yachts
Materials:
U.V. stabilized Acetal sheaves
Acetal ball bearings
Impact modified, fiber reinforced and U.V. stabilized Nylon cheeks
Grade 316 stainless steel load straps and head fittings
Specifications:
Sheave Ø: 30mm(1-3/16")
Max. Rope Ø: 8mm(5/16")
M.W.L.: 300kg(660lbs)
B. L.: 750kg(1,650lbs)
Weight: 28g(1.0oz)
|
15.66 |
|
|
Flojet 20381-060 Ports 3/8"OD Straight Push
Flojet Fitting 20381-060 Port x 3/8 inch O.D. Straight Push in Tube Fitting
O-Ring Material of Viton
(2) per package
Used with Flojet and Hanna
|
21.88 |
|
|
Nylon Tubing 3/8" OD - 50'
Nylon tubing for Packaged Steering Systems up to 150hp
|
190.28 |
|
|
Clamp-On Rod Holder Horizontal Mount - Aluminum - 2.375" - 2-3/8" OD - Black
Features:
Clamp-On
Horizontal Mount
Aluminum
2.375" - 2-3/8" OD
Black
Fits Pipe Size #5
|
115.38 |
|
|
Nylatron Sheave Box - Single Upright Lead Block
Lead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers.When mounted in an inverted position, are frequently used as upright leads.
Features:
The external tabs can be formed to fit the spar profile before fastening
Applications:
Typically used in dinghy spars for control lines such as outhauls
Materials:
Nylatron® sheave
Grade 316 stainless steel load housing
Specifications:
Sheave Ø: 22mm(7/8")
Max. Rope Ø: 3mm(1/8")
Max. Cable Ø: 3mm(1/8")
Fastener Ø: 5mm(3/16")
M.W.L.: 160kg(350lbs)
B. L.: 350kg(700lbs)
Weight: 30g(1.1oz)
|
22.92 |
|
|
Spinnaker Pole End - Fits 32mm(1-1/4") OD Pole
Suit external mounting on solid or tubular sections. Push-on beak design allows attachment to the pole ring without manually opening the pin. Attachment point for pin release lines.
Materials:
Chrome plated forged bronze body
Stainless steel plunger pin and straps
|
50.93 |
|
|
March 0115-0074-1000 Housing with 3/8" Od Outlet
Rear Housing 3/8"OD Outlet for 1-MD made from Polypro/Glass Natural
|
11.88 |
|