Spring Loaded/Lined Slide/Stainless Steel for 1-1/4" T-Track Delrin™ sheave ensures smooth operation and high safe working load. Stainless Steel cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment.  Specifications: Track Size 1-1/4" x 3/16" (32 mm x 5 mm) Max. Boat Length 33' (10 m) Max. Boat Weight 12000 lbs. (5455 kg) Max. Sail Area 520 sq. ft. (48 m2) Sheave Diameter 2-3/8" (60 mm) Max Line 1/2" (12 mm) Length 4" (102 mm) Width 1-9/16" (39 mm) Height 4-15/16" (126 mm) Bearing Height 2-3/8" (67 mm) SWL 2250 lbs. (1020 kg) Weight 14 oz. (397 g) 

Genoa Slide with Loop for 32mm Track Have a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4") 'T' track. All are manufactured from high-quality marine grade aluminum and finished with our unique 'Spectro' grey anodized finish for added protection. This slider has molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion.  Features: 'Spectro' grey anodized finish The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Heavy-duty Genoa car options 32mm 'T' section track Drilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths Specifications & Dimensions: Length: (mm) 109 / (inch) 4-5/16" Width: (mm) 52 / (inch) 2-1/16" Height: (mm) 50 / (inch) 1-15/16" Break Load: (kg) 2980 / (lbs.) 6,570 SWL: (kg) 1490 / (lbs.) 3,285  Weight (grams): 254 g

Snap Shackle - Fixed Bail - 85mm(3-11/32") Length Heavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength to weight ratio. Split ring on plunger pin is spot welded for security. A lanyard can be attached to the plunger pin for easy opening. Materials: Grade 15-5PH investment cast stainless steel body and hasp Grade 316 stainless steel plunger pin and spring

Snap Shackle - Large Swivel Bail - 101mm(3-31/32") Length Heavy duty plunger springs and precision components ensure dependable service. Body and hasp profiles are designed for easy clearance of lines and fittings when released. High strength to weight ratio. Split ring on plunger pin is spot welded for security. A lanyard can be attached to the plunger pin for easy opening. Materials: Grade 15-5PH investment cast stainless steel body and hasp Grade 316 stainless steel plunger pin and spring

Tethered 1/4" Spring Loaded Clevis Pin w/Lanyard For use with Attwood deck or rail mounted bimini top hinge fittings that use removable 1/4" spring-loaded clevis pins. This handy 1/4" spring-load clevis pin with lanyard allows the pin to be tethered to prevent loss of the pin when it is removed from the bimini top deck or rail hinge fitting.

Series 32 I-Beam Car - Saddle Top - Rubber Stand-Up Pad - 76mm(3") Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation. Applications: Mainsheet and self-tacking jib travellers on boats to 9m (28ft) Materials: Black Chromed Grade 316 stainless steel car bodies Grade 316 stainless steel wheels and fixtures Specifications: Length: 76mm(3") M.W.L.: 650kg(1,430lbs) B. L.: 2,000kg(4,400lbs) Weight: 320g(11.3oz)

Pulpit Furling Lead Spring Loaded Block - 1" Ball Bearing The Stainless Steel spring guarantees maximum support for the block. Delrin™ ball bearing sheave ensures low-friction lead for your furling line.  Specifications: 1" (25mm) stanchions Length 4-11/32" (111mm) Width 1-9/16"(40mm) Safe Working Load 1000 lbs (450kg) Weight 4 oz (113g) Max line size 7/16" (11mm) Sheave diameter 1-7/16" (37mm) 

Spring-Loaded Flip Lid Cover The 4-wire trolling/charging system eliminates the need for a charge/run switch. Install the receptacle on the boat, mount the black plug on the trolling motor and the red plug on the leads of the battery charger. Simply connect the black plug to troll or the red plug to charge. Features: Spring-loaded flip lid cover without receptacle

Tuthill 4RC2F-RH-C Pump Tuthill 4RC2F-RH, Cast Iron Rotary Gear Pump C2F FEATURES Flange Mount Configuration Spring Loaded Viton Lip Seal Inlet Pressure to 25 PSI Discharge Pressure to 100 PSI Maximum Differential Pressure to 100 PSI Positive Displacement Internal Rotary Gear Design Cast Iron Construction with NPT Top Ports Typical Viscosity Range is 40 - 10,000 SSU Temperatures to 375°F

Series 40 All Purpose Block - Single Cheek Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Can be mounted on masts and booms using the curved surface adapter. Can be stacked to create a double version, but no more than 60% of the rated working load should be applied to the upper sheave. Stackable with Ronstan Series 40 deck organizers. Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: U.V. stabilised Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Alloy cheek plates

RAM Universal X-Grip® Cell Phone Holder Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Features: Spring loaded holder expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball mounts Single socket technology allows for multiple adjustment angles and articulation of device Compatible Cases/Skins/Bumpers: Artwizz Ballistic Belkin BodyGlove Case-Mate DragonFly Ed Hardy FishBone G-Mate Griffin iFrogz iLuv InCase Incipio Inspiretech iSkin Ivyskin Krusell Luxmo Mobo Monaco Oakley Otterbox Seidio SolidColors Speck SwitchEasy Talon Cases TPhone Trident TurtleBack Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Material: High Strength Composite with Rubber Tips

Flush Pull Chrome Plated Zinc Alloy Black Polymer Finishing Flange Spring Loaded, Can be mounted Horizontally or Vertically

TR3 Spring Loaded Safety Pin - 1/4" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard-style release for maximum user safety All parts 100% stainless steel WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

TR8 Spring Loaded Safety Pin - 3/4" Shackle Features: Hitch pin lock for device locking safety Computer generated parts precision-cut from aerospace grade stainless steel plate Low friction, low effort lanyard-style release for maximum user safety All parts 100% stainless steel WARNING: This product can expose you to chemicals including Titanium dioxide which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Genoa Car - Fits 32mm (1-1/4") T Track Feature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is through-bolted and riveted for extra strength. A popular range of Genoa cars and sliders designed to run on a 32mm (1-1/4") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection. Molded nylon inserts to ensure free, smooth running under load and prevent damage to the finish or potential corrosion. Features: 'Spectro' grey anodized finish The stainless steel plunger stops with positive action Molded nylon slide inserts ensure free running Large, easy-grip plunger knobs Cars and sliders are compatible with all makes of 'T' track Modified slider inserts available for obscure sizes 32mm 'T' Section Track Drilled for fastenings and plunger stops. 'Spectro' grey anodized and supplied in metric lengths. Specifications and Dimensions: Length: 109mm (4.3") Width: 52mm (2.05") Height: 102mm (4.02") Sheave Ø: 50mm (1.97) Max Rope Ø; 2 x16mm (2 x 0.63") Break Load: 3,280kg (7,231.7lbs) SWL: 1,640kg (3,615.6lbs) Weight: 469g (1.03lbs)