Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

RAM Adapt-A-Post Quick Release Track Base (Track Dimensional Range: .250" - .562") For the serious kayak angler, the RAM Quick Release Track Base is a universal mounting solution for a wide variety of RAM kayak products. The RAM Adapt-A-Post Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the ball counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac Wilderness Systems SlideTrax Most Common T-Tracks Scotty Slide Track Many More! Track Dimensional Range: .250" MIN. - .562" MAX. Features: Quick release and installation Easily relocate adapter along track, can be installed at any point on the track High strength materials ensure product longevity Compatible will all RAM Post and Spline Rod Holders Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag

Series 40 All Purpose Block - Single Cheek Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave All purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.Can be mounted on masts and booms using the curved surface adapter. Can be stacked to create a double version, but no more than 60% of the rated working load should be applied to the upper sheave. Stackable with Ronstan Series 40 deck organizers. Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8m (26ft) Materials: U.V. stabilised Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Alloy cheek plates

Towable Genoa End & Becket - Fits 25mm(1") T-Track Length:88mm Width:37mm Height:50mm Sheave Diameter:35mm Max Rope Diameter:8mm Break Load:N/A Safe Working Load:N/A Weight:121g A popular range of genoa cars and sliders designed to run on 25mm (1") 'T' track. All are manufactured from high quality marine grade aluminium and finished with our unique 'Spectro' grey anodised finish for added protection. All cars and sliders have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion. 'Spectro' grey anodised finish Stainless plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs

Towable Genoa Car - Fits 25mm(1") T-Track Towable genoa cars With tow eye or sheave in place of plunger, allowing a control line to be lead aft so that genoa car adjustments can be made from the cockpit. Use in conjunction with end fittings shown. Length:170mm Width:42mm Height:87mm Sheave Diameter:40mm Max Rope Diameter:2 x 12mm Break Load:2,280kg Safe Working Load:1,140kg Weight:297g A popular range of genoa cars and sliders designed to run on 25mm (1") 'T' track. All are manufactured from high quality marine grade aluminium and finished with our unique 'Spectro' grey anodised finish for added protection. All cars and sliders have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion. 'Spectro' grey anodised finish Stainless plunger stops with positive action Moulded nylon slide inserts ensure free running Large, easy-grip plunger knobs

XI Series Quick-Release Bracket, Composite, White The Quick-Release Bracket provides quick installation and removal of MotorGuide Xi5 trolling motors as well  as competitive electric steer motors. Low profile and small foot print don't take up much space on boat deck. Tough composite nylon construction with stainless steel hardware included. Bracket can be secured with a padlock for theft protection.  White model. Low profile design Made out of composite material White WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1.5" Track Ball w/ T-Bolt Attachement Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for the all fishing enthusiasts, the RAM Track Base is certain to create more mounting options or access on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-Tracks Scotty Slide Track, Many More!

1" Track Ball w/ T-Bolt Attachement Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for the all fishing enthusiasts, the RAM Track Base is certain to create more mounting options or access on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-Tracks Scotty Slide Track, Many More!

XI Series Quick-Release Bracket - Composite Black This bracket is low profile and the small footprint is designed to save you space.

XTM 9 DI 25 T Trolling Motor Mount Transducer Trolling Motor Mount Transducer Down Imaging™/DualBeam Plus™, 75°/45°, 455/800 kHz (DI) and 25°/16°, 200/455 kHz, with built in temperature, 15' Cable. Low profile design minimize snags. Easy installation, all hardware included. For Use With: 700 Series, 788ci HD DI Combo 500 Series, 597ci HD DI Combo, 596c HD DI, 587ci HD DI, 581i HD DI, 571 HD DI, 570 DI, 561 DI 300 Series, 386ci DI Combo, 385ci DI Combo, 346c DI Combo, 345c DI Combo WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Haight Pump HGTRV4480 Viton R/V For 44 Series

Series 19 I-Beam Car - Adjustable Track Stop - Spring Loaded - 25mm(1") Track Fastenings: To suit 5mm(3/16") countersunk fasteners at 100mm(3-15/16") centres. Stop Holes: - 50mm (1-31/32") centres. Track is supplied with RC7250-INS insulating inserts to eliminate corrosion between track and fasteners Minimum Curve Radius For 51mm(2") car Min horizontal 'A' curve radius = 400mm (15-3/4"). Min horizontal 'B' curve radius = 400mm (15-3/4"). For 86mm (3-3/8") car Min horizontal 'A' curve radius = 1200mm (47-1/4"). Min horizontal 'B' curve radius = not suitable. For 105mm (4-3/16") car Min horizontal 'A' curve radius = 400mm (15-3/4"). Min horizontal 'B' curve radius = not suitable. Applications: Mainsheet and self-tacking jib travellers on dinghies and catamarans Mainsheet systems on boats to 9M (28') Materials: Stainless body & plunger

Ethernet Cable for M-Series - 25' FLIR's 25' Ethernet Cable is for connecting the FLIR M-Series Cameras to the Joystick Control Unit. Features: Double Shielded RJ-45 LSZH 25' long

Split Cotter Ring - 25mm(1") ID Suits clevis pins RF267 - RF278 Grade 316 Stainless Steel

Spring Loaded/Lined Slide/Aluminum for 1" T-Track Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment.  Specifications: Track Size 1" x 1/8" (25 mm x 3 mm) Max. Boat Length- 27' (8m) Max. Boat Weight- 5000 lbs. (2270 kgs) Sail Area- 315 sq. ft (29 m2) Sheave Diameter 2" (51 mm) Max Line 7/16" (11 mm) Length 3" (76 mm) Width 1-1/4" (31 mm) Height 4-5/32" (105 mm) Bearing Height 2-7/32" (56 mm) SWL 1750 lbs. (795 kg) Weight 7.0 oz. (198 g)