|
Fish-Scout 800 Infra-Red Color/B-W Underwater Camera with Soft Case
The Fish-Scout 800 IR is a complete underwater viewing system that consists of a color/ black and white camera, 7 color LCD monitor, rigid carrying case with an enclosed 12 volt - 9 amp hour battery, 1 Amp Digital charger and protective soft pack carrying case. The system comes fully assembled and ready to use directly out of the box. This system is energy efficient and can run for over 9 hours on a single battery charge. Comes standard with a two year warranty.
|
359.94 |
|
|
1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank - 2,000 lb. Capacity - Chrome
CURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At CURT, the trailer balls are engineered to be precisely fitted. When we stamp 1-7/8" into the top of each hitch ball, we actually mean 1-7/8".
This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.
Features:
It fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW
Constructed from high-strength, hot-forged steel
Protected by a durable chrome-plated finish
Zinc-plated hex nut and helical lock washer for secure mounting
Features fine threads for superior holding strength
Tested for safety to meet U.S. VESC V-5 specifications
Specifications:
Ball Capacity: 2,000 lbs
Ball Diameter: 1-7/8 in.
Finish: Chrome-plated
Hub Warehouse: D25
Material: Forged steel
Shank Diameter: 3/4 in.
Shank Length: 1-5/8 in.
Shank Rise: 0 in.
Torque: 160 ft. lb.
Warranty: Limited lifetime warranty (one-year finish, one-year parts)
*The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank
|
10.93 |
|
|
Groco 12V-F 12V Motor 1/8Hp 3.5" Shaft
|
577.69 |
|
|
Groco 24V-F 24V Motor 1/8Hp 3.5" Shaft
|
580.13 |
|
|
Horizontal Battery Distribution Cluster f/Single Engine w/Two Battery Banks
The 716-H-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system. To be used in a single outboard dual battery bank system or in a single alternator inboard engine dual battery bank system.
No more flat start batteries
Electronics protection from harmful engine start spikes
The 716 cluster is for use on charging systems up to 150A
The 716 cluster replaces battery isolator systems
Two battery banks
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
185.77 |
|
|
Square Battery Distribution Cluster f/Single Engine w/Two Battery Banks
The 716-SQ-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system. To be used in single outboard dual battery bank or single alternator inboard engine dual battery bank.
No more flat start batteries
Electronics protection from harmful engine start spikes
The 716 cluster is for use on charging systems up to 150A
The 716 cluster replaces battery isolator systems
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
185.77 |
|
|
Battery Distribution Cluster f/Twin Engine w/Two Battery Banks
The 715-S allows you to switch the house loads between port and starboard batteries. You can also use the selector switch to parallel the batteries .
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
109.34 |
|
|
Stainless Steel Cover f/Duplex Receptacle w/Lift Lid
This 302 stainless steel sealed cover with lift lid fits 4700CR, 5262CRR and 5739CR duplex receptacles.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
42.20 |
|
|
RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases
The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet.
The RAM Tab-Tite cradle is compatible with the following tablets:
10" Screen Tablets with LifeProof nüüd cases
10" Screen Tablets with Lifedge cases
10" Screen Tablets with heavy duty cases
The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 8.75" minimum to 10.75" maximum
Width: maximum to 8.25"
Depth: maximum to 1.1"
Tab-Tite Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
27.61 |
|
|
RAM Tab-Lock Universal Locking Cradle f/Apple iPad w/LifeProof & Lifedge Cases
The RAM-HOL-TABL17U consists of a spring loaded back plate, custom support cups and locking mechanism. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft.
The RAM Tab-Lock cradle is compatible with the following tablets:
10" Screen Tablets with LifeProof nüüd cases
10" Screen Tablets with Lifedge cases
10" Screen Tablets with heavy duty cases
Tab-Lock Cradle Dimensions:
Height: 8.75" minimum to 10.75" maximum
Width: maximum to 8.25"
Depth: maximum to 1.1"
Tab-Lock Cradle Features:
1. Locking mechanism for theft deterrence
2. Support cups contain open slots to accommodate for tablets of various sizes
3. Back plate can support various size support cups
4. Spring loaded tension provides secure support for your tablet
5. Spring loaded cradle allows for quick release of your tablet
6. High strength materials maximize longevity of cradle
7. Full access to all ports
8. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
66.66 |
|
|
Stainless Steel Dimmer f/LED Lights w/On-Off Feature
LED Continuous Adjustment Dimmer Switch is constructed of 304 stainless steel and features easy-to-use color coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. A short press turns the light on and off, then a longer press activates the dimming/brightening function. Memory function turns the light back on at the same brightness level as when it was turned off. 1.5A max. 12VDC. IP67 waterproof rating.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.51 |
|
|
Levered Chain Stopper f/5/16" or 8mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
8mm (5/16"):
B - 72mm (2-7/8")
C - 20mm (7/8")
F - 152mm (6")
G - 92mm (3-5/8")
G1 - 30mm (1-3/16")
I - 70mm (2-7/8")
J - 31.5mm (1-1/4")
J1 - 10mm (7/16")
K - 51.5mm (2-1/8")
L - 95mm (3-3/4")
M - M10
|
269.10 |
|
|
Economy Chain Stopper f/5/16", 3/8", 8mm & 10mm Chain
Chain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the anchor, break free the anchor or to prevent accidental free fall of the anchor while under way. Also recommended for VW series rope and chain systems to hold the chain while changing over from rope to chain.
8/10mm (5/16"/3/8"):
B - 62mm (2-3/8")
C - 6mm (1/4")
F - 80mm (3-1/8")
G - 46mm (1-4/4")
G1 - 17mm (5/8")
I - 92mm (3-5/8")
J - N/A
J1 - 37mm (1-1/2")
K - 74mm (2-7/8")
L - N/A
M - M10
|
81.36 |
|
|
Little Giant Submersible Pump 505025
Little Giant 5-MSP w/25' Cord Submersible Pump
Motor 115 Volt 60 Hz 1/6 HP Permanently Lubricated Oil Filled Continuous Duty Motor, 1200 GPH at 1 Foot Head, Shutoff Head 26.3 Feet, Inlet: Screened, Outlet: 1" MNPT with Garden Hose Adaptor, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Manual Operation, Fluid Temperature Up to 120F (49C), 25 Foot Power Cord
505025 For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated
|
243.36 |
|
|
Elite Fender Cover for F-5 Fender - Black
Fender covers should be as tough as the fenders they protect. That was our criteria used in developing the Elite Fender Cover series.
Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure. Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet. The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split. This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.
Compatible With:
F-5 Fenders
Features:
Hand-crafted with heavy-duty polyester fabric for durability
Sun resistant, abrasion-resistant and water-resistant
Washable
Custom fit for a tailored look
A tough 1/4" line drawstring closure
Quick and easy installation
*Sold as an Individual
|
61.81 |
|