|
Water Pressure Regulator - Flush Mount - White
Easy to install, easy-clean in-line filter, permanently installed flush mount model and in-line model with brass garden hose fittings that connect dockside water entry and garden hose water hook-up. Reduce high water pressures (up to 100 psi down to 35 psi).
Features:
Built-in back flow preventer
Easy-to-install
Easy clean in-line filter
|
40.55 |
|
|
Combo Carbon Monoxide Propane Alarms Flush Mount - White
Have a safe TRIP!
Test and inspect the Propane and CO alarms installed in your RV every week and replace malfunctioning alarms.
Replace all Propane and CO alarms that are 5 years old or older.
Install alarms listed for RV use.
Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm.
Features:
Double-duty alarm - Detects both gas leaks and CO gas simultaneously
Reliable - 12V power means no missing or dead batteries to replace
Durable - Built for the extreme RV environment
Approved - Meets RVIA/NFPA requirements
End of Life Signal
|
79.92 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with White Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
135.00 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
135.00 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with Red Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
112.49 |
|
|
SR-L Series Marine Spreader Light - Black Flush Mount - White Light with White Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
102.71 |
|
|
SR-L Series Marine Spreader Light - Black Flush Mount - White Light with Red Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
112.49 |
|
|
D-Series PRO Hybrid Diffused Flush Mount White Light
The D-Series has always been the most versatile compact lighting package on the market today. RIGID has just made it professional grade with the D-Series PRO, which offers more light output than ever before thanks to recent advancements in LED technology. Available with a variety of mounting options, including surface, flush, or heavy-duty, the D-Series PRO can be utilized for virtually any lighting application. Measuring just 3” x 3”, the D-Series PRO packs a powerful punch up to 102% more raw lumens depending on the optics chosen. RIGID’s D-Series PRO (Professional Race Output) lights are available with either a black or white finish, and recent updates to the D-Series PRO include new branding and blacked-out circuit boards for a more refined look. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.
Features:
50,000 Plus Hour Lifespan
9-36 V DC
Durable UV Resistant Powder Coat
High-Grade Aluminum Alloy
Integrated Thermal Management System
Impact Resistant Polycarbonate Lens
Over/Under Voltage Protection
RFI/EMI Protection
Reverse Polarity Protection
RoHS Compliant
IP68 Compliant - Dust/Water Ingress
Operating Temp -40 Deg F To +145 Deg F
SAE J575 Compliant - Shock/Vibration
Available In White And Black Housing
Pressure Equalizing Vent
Waterproof Connector (Exclusions Apply)
Limited Lifetime Warranty
Off Road Use Only
What's Included?
Mounting Hardware
Stainless Steel, U-Shape Bracket (Excludes FM)
Vibration Isolators (Heavy Duty Surface Only)
Harness with Switch
Deutsch Connector
*Sold as a single
|
117.59 |
|
|
62 Series Marine Carbon Monoxide - Flush Mount - White - 12V with Trim Ring
Features:
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
NMMA Listed Component.
Space Saving design works in harsh marine environments.
Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor.
No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.
Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater.
Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.
End of Life Signal alerts boater to replace the alarm after 5 years of service.
Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.
Specifications:
Conforms To ANSI / UL STD 2034*
* Testing Laboratory: ETL/Intertek
Alarm Point: 400 PPM 4-15 Minutes
Low voltage power warning at 7 Volts
Power Supply and Current Draw: 37 mA @ 13.8 VDC
Operational Range: 13.8 Volts +/-15%
Low voltage power warning at 7 Volts
Operating Temperature: -40°F to +158°F
Case Size: 4.5″W x 3.25″H x 1.25″D
|
62.93 |
|
|
Razor Light Bar - Spot - Flush Mount - White
The World’s FIRST flush-mount light bar. Razor was carefully designed to be easily integrated into most existing hardtop, arch, and pilothouse designs – typically with little or no modification to production tooling.
Razor is designed to drop into a contoured pocket molded into a hardtop, radar arch, brow, or other surface. Alternatively, use Razor’s surface mount kit for a sleek, low profile installation on existing flat or slightly crowned tops. Mount forward or aft, horizontal or downward facing. In all installations Lumitec’s careful thermal analysis and self-venting design puts an end to ‘pod’ mounted lightbars, which can overheat and damage surrounding composites in hard tops. Flood and spot/flood beam patterns ensure the light goes where you need it.
Advanced Thermal Management
Razor has been designed and analyzed as a complete system – with careful consideration of the top in which it is mounted. This means that Razor delivers maximum performance while protecting hardtops and pods from dangerously high temperatures.
80% Lower Profile Than Most Other Light Bars On The Market
Razor’s integrated design delivers more power with a cleaner, more streamlined look. Up to 80% more streamlined in fact. As the images to the right demonstrate Razor allows builders to eliminate light pods which must be molded and added separately, saving many hours of costly finishing labor. Razor simply drops into an as-molded recess. CAD models of mold plugs or tooling inserts may be provided upon request.
Features:
10,000+ TRUE lumens output
Surface mountable on top or inverted
Dimmable with no additional dimmer switch required
Available with two beam patterns (spot or flood)
Low profile (1.5") with sleek streamline design
Powder-coated die-cast aluminum construction
Voltage: 10-30V DC
|
574.97 |
|
|
Attention Sailers!!!
Do you have a Binnacle mounted compass that is looking really bad?
Now is the time to update to a New Ritchie DNP-200 Navigator Compass.
We have one in stock in our clearance section selling for have the price.
Ritchie Navigator Compass
Navigator Compass Features:
4-1/2" PowerDamp Flat Card Dial with Large Numerals
Brushed Stainless Housing
Ideal for both Power and Sail Boats
Fits all Popular Sailboat Steering Pedestals
Exclusive Built-in Green NiteVu Night Illumination
Built-in Compensators to Easily Adjust for Deviation
Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement
Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions
Powerful DirectiveForce Magnets for Fast Heading Lock-on
Movable Sun Shield
45 Degree Lubber Lines
High Temperature Construction for Extended Operating Range
Custom Fitted Protective Covers Available (weather shield model no. WS-P)
Easily Installed, Fits 5.25" (13.35 cm) Mounting Hole
100% Repairable
Exclusive 5-Year Ritchie Warranty
Get it today before it's gone at
https://www.clrmarine.com/m4/10377--ritchie-dnp-200-navigator-compass-binnacle-mount.html
|
|
|
Helmsman Compass
Features:
3 3/4″ (95 mm) Open Face Dial or CombiDial
Easily Installed, Fits 4″ (102 mm) Mounting Hole
Exclusive Built-in Green NiteVu Night Illumination
Built-in Compensators to Easily Adjust for Deviation
Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement
Powerful DirectiveForce Magnets for Fast Heading Lock-on
Movable Sun Shield
45 Degree Lubber Lines
High Temperature Composite Construction for Extended Operating Range
100% Repairable
Exclusive 5-Year Ritchie Warranty
Approx. Shipping Weight: 2lbs (907g)
Notes:
Comes standard with 12v lighting. 24 & 32v lighting options are available. Some custom built OEM models may have different lighting.
|
258.49 |
|
|
Helmsman Combidial Compass
Features:
3 3/4″ (95 mm) Open Face Dial or CombiDial
Adjustable and Removable with Bracket and Thumbscrews
Exclusive Built-in Green NiteVu Night Illumination
Built-in Compensators to Easily Adjust for Deviation
Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement
Powerful DirectiveForce Magnets for Fast Heading Lock-on
Movable Sun Shield
45 Degree Lubber lines
High Temperature Composite Construction for Extended Operating Range
100% Repairable
Exclusive 5-Year Ritchie Warranty
Approx. Shipping Weight: 2lbs (907g)
Notes:
Comes standard with 12V lighting. 24 & 32V lighting options are available. Some custom built OEM models may have different lighting.
|
286.58 |
|
|
Supersport™ Compass
Developed for and tested on offshore race boats the SuperSport Series compasses feature the PowerDamp® Plus dial. This dial technology features the PowerDamp® dial skirt to prevent oscillation, larger DirectiveForce™ magnets for quick lock on and extra-large steel pivots and jewels for smooth fast action.
Features:
3 3/4″ (96 mm) PowerDamp Plus, High-Visibility Blue Open Face Dial with Extra Large White Numerals
Easily Installed, Fits 4″ (10.16 cm) Mounting Hole
Built-in Compensators to Easily Adjust for Deviation
Built-in 12v Green LED lighting in Movable Sun Shield
100% Repairable
Exclusive 5-Year Ritchie Warranty
Approx. Shipping Weight: 2lbs. (907g)
Notes:
24 & 32v lighting options are available. Some custom built OEM models may have different lighting.
|
292.70 |
|
|
Supersport™ Compass
Developed for and tested on offshore race boats the SuperSport Series compasses feature the PowerDamp® Plus dial. This dial technology features the PowerDamp® dial skirt to prevent oscillation, larger DirectiveForce™ magnets for quick lock on and extra-large steel pivots and jewels for smooth fast action.
Features:
4 1/2″ (115 mm) PowerDamp Plus, High-Visibility Blue Dial with Extra Large White Numerals
Easily Installed, Fits 4.75″ (121 mm) to 5.125″ (130 mm) Mounting Hole
Built-in Compensators to Easily Adjust for Deviation
Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions
12v Green LED lighting standard
45 Degree Lubber Lines
100% Repairable
Exclusive 5-Year Ritchie Warranty
Approx. Shipping Weight: 2lbs 10oz (1.19kg)
Notes:
Comes standard with 12v lighting. 24 & 32v lighting options are available. Some custom built OEM models may have different lighting.
|
504.88 |
|