Raritan 1203W Ph Air Valve Assy

Raritan CH117W Flapper Valve Assy Std

Pulsafeeder K4VHC1 Repair Kit K4Vhc1 Head Size: 4 Head Material: PVC (Polyvinyl Chloride) Seat/O-Rings: CSPE (Hypalon) Valve Ball: Ceramic Connection Type: Tubing 0.25" x 0.38"

Pulsafeeder K8WTCB Kop Kit Head Size: 8 Head Material: PVC (Polyvinyl Chloride) Seat/O-Rings: TFE (Teflon) Valve Ball: Ceramic Connection Type: Tubing 0.50" x 0.75"

Pulsafeeder LPH6SA-VTC3-XXX E Plus Pump 120 Gpd Max Flow: 5.00 gph (120 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVC (Polyvinyl Chloride) Seats / O-Rings: TFE (Teflon) Balls: Ceramic Tubing: 1/2" OD Control: Manual On/Off   The Pulsafeeder Pulsatron LPH6SA-VTC3-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.   Features: - Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model. - Manual control of stroke rate and length via control knobs on the front of the pump. - Fuse mounted on the panel for extra protection. - Designed out of water resistant material (perfect for indoor & outdoor placement).

Pulsafeeder NC90XX2HPA-XXXXX Kit Tube Assy 2Hpa

Pulsafeeder NC91XA6LP1-XXXX Kit Hd/Rtr Assy

Pulsafeeder LB02SA-VHC1-XXX Pump A Plus 6Gpd Max Flow: 0.25 gph (6 gpd) Max Pressure: 150 psi (10 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVC (Polyvinyl Chloride) Seats / O-Rings: CSPE (Hypalon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   Pulsafeeder Pulsatron LB02SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.

Pulsafeeder LB64SA-VHC1-XXX Metering Pump 30Gpd Hypalon Max Flow: 1.25 gph (30 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVC (Polyvinyl Chloride) Seats / O-Rings: CSPE (Hypalon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   Pulsafeeder Pulsatron LB64SA-VHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.  

Pulsafeeder LB02SA-VTC1-XXX Pump A Plus 6Gpd Max Flow: 0.25 gph (6 gpd) Max Pressure: 150 psi (10 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVC (Polyvinyl Chloride) Seats / O-Rings: TFE (Teflon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   Pulsafeeder Pulsatron LB02SA-VTC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.

Pulsafeeder UD10-XL-LSAUXXX Dolphin 10 Pmp 240V 50/60Hz INLET SIZE: 1/4 in HOUSING: Chemical Resistant Resin MOTOR HZ RATING: 50/60 MOTOR VOLTAGE: 230 VAC OUTLET SIZE: 1/4 in MAX FLOW: 13 gpd MAX PRESSURE: 25 psi (1.72 bar) INJECTION FITTING: PVC DISPLACEMENT: Positive Displacement

Pulsafeeder LMH6TA-KTC3-500 120Gpd 115V Pvdf/Tef Meter Max Flow: 5.00 gph (120 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: PVDF (Kynar) Seats / O-Rings: TFE (Teflon) Balls: Ceramic Tubing: 1/2" OD Options: 5 Function Valve Control: Signal Level Control   Pulsafeeder Pulsatron Series MP Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.  

Pulsafeeder L3201TC3-FPP Valve Assembly Connection: 1/2" OD Body Material: FPP O-Ring Material: Teflon Includes: O-Ring   For use with PTC3 wet end configuration.   The L3201TC3-FPP Discharge Valve Assembly attaches to the upper side of the head of your metering pump.

Pulsafeeder L380DT03PVD 5 Function Valve

Pulsafeeder K2PHC1 Repair Kit K2Phc1 Head Size: 2 Head Material: GFPPL (Glass Filled Polypropylene) Seat/O-Rings: CSPE (Hypalon) Valve Ball: Ceramic Connection Type: Tubing 0.25" x 0.38"