Yamada 832162 Pilot Valve Assy

Raritan 1203W Ph Air Valve Assy

Raritan CH117W Flapper Valve Assy Std

Pulsafeeder K2PTCJ Kop Kit K2 Fpp/Tfe/Cdbl Head Size: 2 Head Material: GFPPL (Glass Filled Polypropylene) Seat/O-Rings: TFE (Teflon) Valve Ball: Ceramic Connection Type: Tubing 0.25" x 0.38"

Pulsafeeder NC90XX2HPA-XXXXX Kit Tube Assy 2Hpa

Pulsafeeder NC91XA6LP1-XXXX Kit Hd/Rtr Assy

Pulsafeeder K2PHC1 Repair Kit K2Phc1 Head Size: 2 Head Material: GFPPL (Glass Filled Polypropylene) Seat/O-Rings: CSPE (Hypalon) Valve Ball: Ceramic Connection Type: Tubing 0.25" x 0.38"

Pulsafeeder K4PHC1 Repair Kit K4Phc1 Head Size: 4 Head Material: GFPPL (Glass Filled Polypropylene) Seat/O-Rings: CSPE (Hypalon) Valve Ball: Ceramic Connection Type: Tubing 0.25" x 0.38"

Pulsafeeder K3PTT1 Kop Kit Head Size: 3 Head Material: GFPPL (Glass Filled Polypropylene) Seat/O-Rings: TFE (Teflon) Valve Ball: TFE (Teflon) Connection Type: Tubing 0.25" x 0.38"

Pulsafeeder K4PTC1 Kop Kit Head Size: 4 Head Material: GFPPL Seat/O-Rings: TFE (Teflon) Valve Ball: Ceramic Connection Type: Tubing 0.25" x 0.38"

Pulsafeeder K4PTT1 Kop Kit Head Size: 4 Head Material: GFPPL Seat/O-Rings: TFE (Teflon) Valve Ball: TFE (Teflon) Connection Type: Tubing 0.25" x 0.38"

Pulsafeeder LPE4SA-PTT1-XXX Metering Pump Max Flow: 1.85 gph (44 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: GFPPL (Glass Filled Polypropylene) Seats / O-Rings: TFE (Teflon) Balls: TFE (Teflon) Tubing: 3/8" OD Control: Manual On/Off   The Pulsafeeder Pulsatron LPE4SA-PTT1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.   Features: - Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model. - Manual control of stroke rate and length via control knobs on the front of the pump. - Fuse mounted on the panel for extra protection. - Designed out of water resistant material (perfect for indoor & outdoor placement).

Pulsafeeder LPH4SA-PTC1-XXX E Plus Pump 40 Gpd Max Flow: 1.70 gph (41 gpd) Max Pressure: 250 psi (17 BAR) Power: 115 Volt / 50-60Hz Head Fittings: GFPPL (Glass Filled Polypropylene) Seats / O-Rings: TFE (Teflon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   The Pulsafeeder Pulsatron LPH4SA-PTC1-XXX Series E Plus Metering pump has a large range of flow and pressure capabilities, make it one of the most versatile series of metering pumps that Pulsafeeder offers. The Series E Plus has flow capabilities ranging from 3 GPD (Gallons per Day) to 600 GPD. The GPD combined with the pressure range of 30 to 300 PSI makes the Series E Plus an excellent choice for your metering application. Having such a wide range of flow and pressure capabilities, you can choose from 20 different pump models in the Series to fit your exact specifications.   Features: - Manual On/Off Control, Automatic control or 4-20mADC Direct w/ stop function depending on the model. - Manual control of stroke rate and length via control knobs on the front of the pump. - Fuse mounted on the panel for extra protection. - Designed out of water resistant material (perfect for indoor & outdoor placement).

Pulsafeeder LB02SA-PHC1-XXX 6 Gpd 150 Psi 115V Pump Max Flow: 0.25 gph (6 gpd) Max Pressure: 150 psi (10 BAR) Power: 115 Volt / 50-60Hz Head Fittings: GFPPL (Glass Filled Polypropylene) Seats / O-Rings: CSPE (Hypalon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   Pulsafeeder Pulsatron LB02SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.

Pulsafeeder LB64SA-PHC1-XXX Pump 30 Gpd A Plus Max Flow: 1.25 gph (30 gpd) Max Pressure: 100 psi (7 BAR) Power: 115 Volt / 50-60Hz Head Fittings: GFPPL (Glass Filled Polypropylene) Seats / O-Rings: CSPE (Hypalon) Balls: Ceramic Tubing: 3/8" OD Control: Manual On/Off   Pulsafeeder Pulsatron LB64SA-PHC1-XXX Series A Plus Metering pumps are leading the way in the development of metering technologies, to set the standard for accuracy, reliability and safety. These pumps are diaphragm type pumps that are positive displacement. The output volume is adjustable from zero to maximum capacity while they are in operation. Each metering pump contains features that help reliability that include a timing circuit along with circuit protection against voltage / current upsets and solenoids that are protected by thermal overload with auto-reset. Providing excellent suction and priming characteristics, the state-of-the-art seat and ball design is guaranteed to never fail.   Controlling the metering pumps are very simple. Adjustments are made with an easily accessible dial knob that is located opposite of the liquid handling end that controls stroke length and frequency. Automatic control is done via 4-20mA DC and stop function inputs, and auto-off-manual switch.   The pump drive assembly is completely enclosed, and has no exposed moving parts. Housed in a enclosure at the rear of the pump, the electronics are protected to ensure no chemicals will come in contact with them. Around 130 watts is the average electric consumption.