DT Deutsch Socket for 14-18 AWG Plug - Size 16 Contact (25 Pack) Deutsch machined contacts are for use with almost the entire line of Deutsch connectors and are ideal for marine conditions. They are known for their reliability and durability, which are just a few of the reasons that professionals turn to these contacts for repeatable and reliable results. Another benefit of these contacts is that they are simple to use and require little time for installation. Features: Easy to install Field serviceable Applications: Cable-to-cable applications Enclosed connectors offer field-proven reliability and rugged quality Compliances: Ingress Protection (IP) Level: IP68 and IP6K9K RoHS UL Recognized Characteristics: Hand-insertable contacts Specifications: Package Size: 25 sockets Contact Size: 16 Wire Size: 14 Operating Temperature: -55°C to 125°C Current Rating: 7.5-25

SHURflo 8000-912-288, Diaphragm Pump 3 Chamber 1.4 GPM 115VAC SHURflo Diaphragm Pump 3 Chamber, 1.4 GPM Open Flow, 115VAC Intermittant Duty, 105 PSI Demand Switch (adjustable 85-105 PSI), 80 PSI Bypass, EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports, UL/CSA Recognized.   Typical Application: Soil Extraction, Carpet Cleaning  

PP4408 PowerPod Pre-Cut f/Simrad GO7 & B&G Vulcan 7 PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. All PowerPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Swivel Base with large pass-through for wire harness

RAM-ROD 2007 Fishing Rod Holder with Single Socket for 1.5" Diameter Ball Bases The RAP-340NB consists of the RAM-ROD 2007 rod holder and single socket for 1.5" diameter ball bases. Ideally suited for vessels as small as kayaks, to larger Tournament or Charter boats, this new line of products is guaranteed to please. Incorporating our one of a kind and patented ball and socket feature, perfect adjustment is a breeze and setting the hook could not be faster. When it comes to price, form, function, and don't forget fun, RAM is the one to get the job done! Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball Bases Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. This transducer mount enables quick, effective deployment and retrieval of your Lowrance StructureScan LSS transducer, while protecting it from damage. Perfect for kayak applications, the included rigid mounting arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the transducer mount can quickly be moved to a different kayak with an existing 1" RAM ball. Add a RAM ball mount for the Lowrance HDS-7 Fishfinder, and you have a complete mounting solution for your next fishing adventure. Compatible Transducers: Lowrance StructureScan LSS-2 Lowrance StructureScan LSS-1 Features: 18" rigid aluminum rod can be bent to position your transducer to its optimum location Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm High quality materials prevent corrosion Compatible with the Yakattack 1" screw ball Lifetime warranty Made in U.S.A. Material: High Strength Composite and Aluminum Steel Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.

Vertical Mounting Base with Double 6" Swing Arm and Swivel Single Socket for 1.5" Balls Features: Weight: 3.45 lbs. Double 6" Swing Arm Swivel Single Socket Made specifically for 1.5" balls

1.5" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

2" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

2.5" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

3.5" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.

3" Pedestal Socket For Tiller Pilots Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm. Compatible Devices: Tiller Pilots

PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part) PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. All PowerPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Swivel Base with large pass-through for wire harness

Flow-Rite 3/4" Straight Quick Connect Socket for Auto Ballast Systems Features: These connect to FatSacs W736, custom machined fittings *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Flow-Rite 1-1/8" Straight Quick Connect Socket for Auto Ballast System Features: They also fit 1.0" Diameter hose These connect to FatSacs W743, W743-SS, W743-DOUBLE, & W748 custom machined fittings *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Flow-Rite 3/4" Elbow Quick Connect Socket for Auto Ballast System Features: These connect to FatSacs W736, custom machined fittings *Sold as an Individual WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.