Explore E7 Thru Hull - 10 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 10-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 20 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 20-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 30 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has a patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 30-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 40 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 40-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 50 Degree Angle - Blue & White The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 50-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 11,000 fixture lumens (ultra white) Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 10 Degree Angle - RGBW Colors DMX The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 10-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 6,000 fixture lumens  Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 20 Degree Angle - RGBW Colors DMX The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 20-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 6,000 fixture lumens  Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 30 Degree Angle - RGBW Colors DMX The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 30-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 6,000 fixture lumens  Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 40 Degree Angle - RGBW Colors DMX The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 40-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 6,000 fixture lumens  Rectangular beam Compact design and small external driver Control by switch or DMX control

Explore E7 Thru Hull - 50 Degree Angle - RGBW Colors DMX The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design. The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition. The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht. The Explore E7 TH has a patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.  IP69k Protection & Temporary Rear Submersion Protection As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k. IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts. The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern. Superior Protection. Total Peace of Mind. Features: 50-degree angle for angled hulls 90-degree top beam 20-degree side beam Up to 6,000 fixture lumens  Rectangular beam Compact design and small external driver Control by switch or DMX control

RVM-400 Stainless Steel Thru-Hull 0 Degree Deadrise & 8M Cable RVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series transducers are compatible with the RVM1600 sonar module and Axiom 2 Pro RVM chartplotters  The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 also has a built-in fast-response water temperature sensor for quick, accurate readings. The RVM-400 series transducers feature a rugged stainless steel through hull body suitable for fiberglass, wood, or metal hulls. The low-profile design slips effortlessly through the water without causing drag or cavitation.  The RVM-400 is a single, all-in-one transducer suitable for boats with a through-hull transducer mounting position with less than 5° hull deadrise.  *Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module Features: 600-Watt traditional CHIRP High-performance Down and SideVision ceramics High-speed housing with isolation plate 8M Cable 0° element for hulls with less than a 5° deadrise

B175H Bronze Thru Hull 12° Tilt - 1kW Requires Mix and Match Cable B175H Bronze Thru Hull 20 degree Tilt 1KWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money. Features: High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth 12° tilted version, 1KW 80 kHz of total bandwidth from one transducer Depth & fast-response water-temperature sensor Bronze transducer housing Boat Size: Up to 11 m (36’) Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175HW Bronze Thru Hull 12° Tilt - 1kW Requires Mix and Match Cable Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered. Features: Depth & fast-response water-temperature sensor 12 degree tilted version, 1KW High—CHIRPS from 150 kHz to 250 kHz 25° constant beamwidth 100 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth Boat Size: 8 m (25’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175M Bronze Thru Hull 12° Tilt - 1kW Requires Mix and Match Cable Rely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money. Features: Medium—CHIRPS from 85 kHz to 135 kHz, 24° to 16° beamwidth 12° tilted version 50 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth Depth & fast-response water-temperature sensor Bronze transducer housing Boat Size: Up to 11 m (36’) Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B175H-W 1KW Bronze Thru Hull 12° Tilted Element Features: Installation: Thru Hull Material: Urethane Power (RMS): 1kW Max Depth(ft): 800 Frequency (KHz): 150-250 Records: Depth and Temperature Approved Hull Material: Fiberglass/Wood Cable Length (ft/M): 6ft/2M Supported deadrise: 8-15° Deadrise Additional Notes: All wide beam products come with a 2M pigtail off the transducer. Requires a Transducer Extension cable for a Complete Transducer Installation. 10M Extension Cable part number A80327 and A80328 Single B75/B175 operation cable.