RayNet (female) to RJ45 Male Cable - 3m RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 3m (9.84 ft.) RayNet to SeaTalkhs (RJ45) cable

2-Way DMX Junction Box The 2-Way DMX Junction Box has been specifically developed to work in combination with OceanLED Sport Colors DMX lights and Explore E3 Colors DMX lights. Its primary role is to allow for the distribution of power and DMX signals within the vessel’s underwater lighting system. Using the 2-Way DMX Junction box, a Sport Colors DMX or Explore E3 Colors DMX system can be expanded to include up to 32 lights. The IP66-rated 2-Way Junction Box unit is made from robust polycarbonate materials and should be mounted in a protected area within the vessel. Features: Allow for the distribution of power and DMX signals within the vessel’s underwater lighting system

AA Sensor Cable for AA150 & AA560 15M (49.2') The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters. Features: The male plugs on both ends of this cable are directly compatible with the female plugs on the console and sensor cables Dimensions:  Length: 49' (15M)

Video Cable F-Type to BNC - 25' 25' Cable - F-Type on one end, BNC on the other end For use with MD-Series

Video Cable F-Type to BNC - 50' 50' Cable - F-Type on one end, BNC on the other end For use with MD-Series

Video Cable F-Type to BNC - 75' 75' Cable - F-Type on one end, BNC on the other end For use with MD-Series

Video Cable F-Type to BNC - 100' 100' Cable - F-Type on one end, BNC on the other end For use with MD-Series

5 Pin Ethernet Cable Joiner (Female to Female)

Marine Network Adapter Cable - Small (Female) to Large Adapt the small network connector to the larger Garmin Marine Network connector with this cable — which is part of the Panoptix™ LiveScope ice fishing kit.

Adapter Cable SeaTalk (1) to SeaTalkNG - 1M An adapter spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70. SeaTalkNG Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkNG connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adapters and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adapters.

Axiom 7DV Adaptor Cable (9-pin to 7-pin) For attaching a CP370 Adaptor Cable (9 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom 7DV

Axiom RV Adapter Cable (25-pin to 7-pin) Adaptor Cable (25 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV

Adapter Cable 25-Pin to 25-Pin & 7-Pin - Y-Cable to RealVision & Embedded 600W Airmar TD to Axiom RV The Raymarine transducer adapter cable allows you to join your Raymarine RealVision 3D transducer and 600w Airmar embedded transducer and adapts them to your Axiom RV. The 25-pin pigtail connects direct to your RealVision 3D transducer and the 7-pin to the Airmar transducer. The single 25-pin end connects direct to your Axiom RV. Features: Attaches the Raymarine RealVision 3D transducer with a 600w Airmar embedded MFD sonar tranducer 7 and 25-pin to 25-pin adapter Compatible with Raymarine RelaVision 3D tranducers and Airmar embedded sonar

Adapter Cable - 25-Pin to 7-Pin - CP370 Transducer to Axiom RV The Raymarine transducer adapter cable allows you to keep your existing 600w Airmar transducer used with a CP370 sonar module and adapts it to your Axiom RV. The 7-pin side connects direct to your Airmar 600w transducer and the 25-pin to the transducer port on the Axiom RV. Features: Allows your existing Airmar 600w transducer to be used on Axiom 7 RV 7-pin to 25-pin adapter Compatible with 600w , DSM300, CP300 and CP370 sonar transducers

Adapter Cable - 25-Pin to 9-Pin & 8-Pin - Y-Cable to DownVision & CP370 Transducer to Axiom RV Y-Cable (25 pin to 9 & 8 pin) to attach a DownVision (CPT-1xx) Transducer & an Airmar (CP370 style connector) transducer to Axiom RV.