RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 75mm X 75mm VESA 3.625" Plate with 1.5" Diameter Ball This RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. The RAM-2461U is compatible with the following electronic devices: MobileDemand XTablet T8600 Glacier Computer Ridgeline Routeware DMS 5000

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern) The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 75mm x 75mm VESA 3.625" Plate w/ 2.25" Diameter Ball This RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. The

RAM® Double Socket Arm with 75x75mm VESA Plate This RAM-103U-B-2461 consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern and SHORT length double socket arm. The rubber ball is positioned 0.88" from the center of one edge. The double socket arm will attach to all RAM 1.5" dia. ball bases.  Features: Socket-to-Socket Length: 2.5" Ball/Socket Size: C Size (1.5") Materials: Marine-grade aluminum

4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 2.25" Rubber Ball "D" Size The RAM-D-101U-246, heavy duty universal assembly, includes a universal base piece to mount heavy devices to a flat surface and a 4.75" x 4.75" face plate. It is recommended for mounting heavy devices such as monitors and flat screen electronics. Features a hole pattern for 100mm and 75mm VESA standards. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size

RAM® 12" Upper Pole with Double Swing Arms & Round Plate The RAM-VP-SW1-12 consists of a 12" upper male Tele-Pole™, double swing arm, and 2.5" round base that contains the universal AMPs hole pattern. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with a rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".   Features: Hardware Included: Assembly Hardware Hole Pattern: Tele-Pole: 2.625" x 2.625"/Round Plate: 4-Hole AMPS: 1.181" x 1.496" & 3-Hole 120-Degree: 1.812" Diameter  Plate Size: 2.5" Diameter Ball Size: C Size (1.5") Materials: Powder-coated steel/Marine-grade aluminum Weight: 4.4 lbs

Universal Backing Plate Mount with 75x75mm VESA Plate The mount consists of a double socket arm with one 2.5" diameter round base and one 75mm x 75mm VESA plate, as well as one backer plate. This mount is extremely adjustable and makes a great choice for anyone interested in mounting a device with a VESA hole pattern to a flat surface that can be drilled into. Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Product Dimensions (inch): Overall Height: 7.35" Socket to Socket Length (inch): 4.66” Hole Pattern: 75 x 75mm VESA Plate Size (inch): 3.625" x 3.625" Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum Weight: 1.59 lb.

Tele-Sun Aluminum Shade Poles with Carry Bag Extend your time on the water and at the sandbar with the new Aluminum Tele-Sun Shade Poles! Made from a strong, lightweight drawn aluminum tube, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Simply insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 44.6” to 69.37” tall. Features: Lightweight drawn and anodized aluminum tube material  Built to withstand the harsh marine environments  Easy installation to deck-mounted rod holders with 1/4” pin  Nylon cleat allows for easy adjustment of line tension  The tip ring feature allows for an alternative fabric clamping bungee cord system  Extends from 44.6” to 69.37”  Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material *Comes as a pair

RAM 12" Long Top Male Tele-Pole The RAM upper Tele-Pole, 12" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket. The male post is 12" long and has a diameter of 1.328". Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag.

Passive RAM Cradle f/Motion C5 RAM high strength composite cradle for Motion Computing C5 and F5 tablets. This cradle is designed to hold the following devices: Motion Computing C5 Motion Computing F5 Features: Quick Release Roller Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The RAM-2461U (75mm X 75mm VESA plate) is used to connect to the back of the passive cradle.

RAM 8" Long Top Male Tele-Pole The RAM upper Tele-Pole, 8" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket. The male post is 8" long and has a diameter of 1.328". Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag.

RAM 4" Long Top Male Tele-Pole The RAM upper Tele-Pole, 4" male pole, contains a swing arm connection point that will attach directly to any double swing arm system with 1.5" Socket. The male post is 4" long and has a diameter of 1.328". Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag.

RAM® No-Drill™ Mount for '19-20 Ford Ranger This RAM® No-Drill™ mounting system installs quickly and easily into the 2019 Ford Ranger and 2020 Ford Explorer using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. The round ball base attached to the end of the swing arm supports a variety of tablet and laptop holders, while RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. Features: RAM® No-Drill™ base offers low-profile mounting; telescoping pole allows for height adjustments Dual articulating swing arm allows for ideal device placement; compatible with a variety of tablet and laptop holders Made of powder-coated steel and marine-grade aluminum Backed by a lifetime warranty Plate Size: 2.5" Diameter Ball/Socket Size: C Size (1.5") Materials: Powder coated steel, Marine grade-aluminum Hardware Included: Assembly Hardware Foot Stabilzier (2) M10-1.5 x 75mm Hex Bolts (2) 1.68" Stand-Offs (2) 3/8" Fender Washers Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter Seat Bolt Distance: 11.5" center to center

RAM® Tilt-N-Turn™ 90-Degree Bracket with Single Swing Arm The RAM-VB-TNT90-1, Tilt-N-Turn™ 90 degree motion attachment swing arm, consists of a steel plate on a single swing arm that has a tilt range of 90 degrees forward and back from the vertical position. The small range of tilt is designed to angle a connected RAM laptop cradle forward giving you a comfortable typing and viewing angle. The Tilt-N-Turn™ plate can spin in 360 degrees around on the swing arm end, and with a twist of the side lock knob, the attachment will tilt forward and back. Knowing that this product has countless applications, numerous hole patterns are built right in making the Tilt-N-Turn™ exceptionally versatile. The AMPS, 90 degree AMPS, 75 x 75MM VESA, 2” x 4”, and RAM’s own three hole at 120 degrees take the guess work out of whether this product will work for you. Whether you have and existing RAM system and want to integrate this product, or simply need the best mounting system available, consider RAM and yet another ergonomic product; this time with the Tilt-and-Turn™ feature.  Hardware Included: (1) 3/8"-16 x 1.5" Carriage Bolt (1) 3/8"-18 Lock Nut (1) 2" Rubber Washer (2) 5/16" Flat Washer Materials:  Powder coated steel Marine grade-aluminum