|
RAM Yoke Clamp Mount w/iPad mini EZ-ROLL'R Cradle
The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
The EZ-ROLL'R cradle is compatible with the following tablets:
Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE
Specifications:
Docking Cradle: No
Locking Cradle: No
Fits Tablets WITH Cases: No
Fits Tablets WITHOUT Cases: Yes
Low Vibration Environment: Yes
High Vibration Environment: Yes
Cradle Features:
1. Compatible with various iPad cable/docking accessories
2. Patent pending roller design for super smooth placement and removal of the iPad
3. High strength materials maximize longevity of cradle
4. Full access to all ports
5. Lifetime warranty
Material:
High Strength Composite
Yoke Clamp Mount Features:
Consists of a double socket arm, round 2.5" base that contains the universal AMPs hole pattern and yoke clamp base. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products.
|
56.76 |
|
|
RAM Suction Cup Mount w/iPad mini EZ-ROLL'R Cradle
The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.
The EZ-ROLL'R cradle is compatible with the following tablets:
Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE
Specifications:
Docking Cradle: No
Locking Cradle: No
Fits Tablets WITH Cases: No
Fits Tablets WITHOUT Cases: Yes
Low Vibration Environment: Yes
High Vibration Environment: Yes
Cradle Features:
1. Compatible with various iPad cable/docking accessories
2. Patent pending roller design for super smooth placement and removal of the iPad
3. High strength materials maximize longevity of cradle
4. Full access to all ports
5. Lifetime warranty
Material:
High Strength Composite
Suction Cup Mount Features:
Double socket arm, 3.25" suction cup twist lock base and round base adapter that contains the universal AMPs hole pattern. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.
|
49.60 |
|
|
RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700
The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.
Features:
Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible
Locks the device in place so it cannot be removed without the use of tools
Made of high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(2) #8-32 x 5/8" Machine Screws
(2) #8-32 Nylock Nuts
(2) 4" Cable Ties
Specifications:
Hole Pattern: 2-Hole AMPS: 1.912"
Materials: High Strength Composite
Weight: 0.35lbs
|
18.88 |
|
|
RAM® EZ-Roll'r™ Powered Dock for Samsung Tab Active 2 & 3
This powered cradle for the Samsung Tab Active3 and Tab Active2 has been designed to meet the demands of field workers in a variety of applications including transportation, field sales, logistics, manufacturing, and much more. Power capabilities are provided to the device through pogo pins, and you can easily rotate the device for use in portrait or landscape mode. This cradle is also compatible with the RAM® Skin™ or factory device skin, as well as GDS® Hand-Stand™ and shoulder strap accessories. Access to the stylus remains while the device is docked. Included is a set of four nuts and bolts to connect the cradle to any RAM® components containing the universal AMPS hole pattern. Also included is the mUSB female pigtail, GDS® USB 2.0 cable, cable clamp, and zip ties.
Features:
RAM® EZ-Roll'r™ Powered form-fit cradle provides charging capabilities for the Samsung Galaxy Tab Active3 and Tab Active2 through an integrated pogo pin connector and mUSB cable
Compatible with the Samsung OEM skin as well as the RAM® Skin™; the built-in cavity in the back allows for GDS® Hand-Stand™ compatibility
Access to speakers, mics, and headphone jack remains while the device is docked; allows access to the GDS® shoulder strap loops on RAM® Skin™
Backed by a 3-year warranty
Specifications:
Product Dimensions(inch): Width: 9.24"; Height: 6.34"; Depth: 2.57"
Hole Pattern: 4-Hole AMPS: (inch) 1.181" x 1.496"
Materials: High-strength composite
Packaging Type: Polybag
Input Voltage: 4.4VDC - 5.4VDC (USB power source dependent)
Output Voltage: 4.4VDC - 5.4VDC (USB power source dependent)
Input Connector: mUSB Female
Warranty: 3-year warranty
Weight (lbs): 0.71 lb.
Hardware Included:
(4) #8-32 x 5/8" Machine Screws
(4) #8-32 Nylock Nuts
(1) GDS® Genuine USB 2.0 Straight Cable
(1) Optional Cable Clamp Housing
(2) Large Cable Ties
(5) Small Cable Ties
*Look to the RAM-GDS-CHARGE-V7BU hardwire charger or the RAM-GDS-CHARGE-USB2QCCIG cigarette vehicle charger for supplying power
|
60.83 |
|
|
Locking EZ-ROLL'R™ Cradle for the Garmin nuviCam and dezlCam
The Garmin nuviCam™ & dezlCam™ keeps an extra eye on the road. And RAM Mounts custom cradle for these innovative devices keeps traffic information in your line of sight and keeps the device secure in your vehicle.
The cradle allows for full range of motion of the device camera and integrates the factory Garmin magnetic dock for access to charging. The high-strength composite mount integrates a cable retention system to prevent accidental unplugging. The custom-fit cradle also has a locking option that is installed using press-fit nuts to enhance security. The cradle has two location options to attach the RAM ball (comes with 1" B-Size ball).
Compatible Devices:
Garmin nuviCam™ LMTHD
Garmin dezlCam™ LMTHD
Features:
Open access to all electronic ports including speaker, microphone, SD and mUSB slots
Allows for full range of motion for the camera
Roller design for super smooth placement and removal of the GPS
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Cradle integrates the factory Garmin magnetic dock
Comes with B sized, 1" ball
Locking attachment allows for a low profile theft deterrent
Lifetime warranty
Made in the U.S.A
Material:
High Strength Composite
|
18.88 |
|
|
RAM® EZ-Roll'r™ Powered Dock for Kyocera DuraForce Ultra 5G E7110
This form-fit dock is designed specifically for the Kyocera DuraForce Ultra 5G E7110, providing a perfect fit for a device without a case or sleeve. The dock supplies power to the device through integrated pogo pins while the device is docked and retains access to the audio port for the device's PTT functionality. For attaching to a huge range of RAM® arms and mounting accessories, the dock is RAM® Mounts Compatible™ with RAM® B and C size diamond ball bases.
Features:
Form-fit powered vehicle dock for the Kyocera DuraForce Ultra 5G E7110 provides a perfect fit for your device without a case or sleeve; access to the audio port is available
When connected to a power source, integrated pogo pins provide power to the device while docked
Compatible with B and C size RAM® diamond ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Made of high-strength composites for durability and reliability in the most demanding environments
Backed by a 3-year warranty
Specifications:
Hardware Included: (2) #8-32 x 1/2" Machine Screws, (2) #8-32 x 5/8" Machine Screws, (2) #8-32 x 3/4" Machine Screws, and (2) #8-32 Nylock Nuts
Hole Pattern (inch): 2-Hole AMPS: 1.912"
Materials: High-strength composite
Input Connector: USB Type A Male
Output Cable Length: 1.25 meters
Packaging Type: Polybag
Weight: 0.45 lb.
Compatibility:
Kyocera: DuraForce Ultra 5G E7110
|
42.72 |
|
|
RAM EZ-ROLL'R Cradle f/SPOT Gen3
This RAM high strength composite cradle is designed to hold the following devices:
SPOT Gen3
Features:
Open access to all electronic ports
Patented roller design for super smooth placement and removal of the SPOT Gen3
Form fitted cradle supports and protects device without vibration
High strength materials ensure product longevity
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
12.38 |
|
|
RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &
Toyota Tundra
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.
The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens)
The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Compatible Vehicles:
Nissan NV1500 (2011-2021)
Nissan NV2500 HD (2011-2020)
Nissan NV3500 HD (2011-2020)
Toyota Tundra (2007-2021)
Features:
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
|
311.86 |
|
|
RAM Universal X-Grip® Cell Phone Holder
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Features:
Spring loaded holder expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
Single socket technology allows for multiple adjustment angles and articulation of device
Compatible Cases/Skins/Bumpers:
Artwizz
Ballistic
Belkin
BodyGlove
Case-Mate
DragonFly
Ed Hardy
FishBone
G-Mate
Griffin
iFrogz
iLuv
InCase
Incipio
Inspiretech
iSkin
Ivyskin
Krusell
Luxmo
Mobo
Monaco
Oakley
Otterbox
Seidio
SolidColors
Speck
SwitchEasy
Talon Cases
TPhone
Trident
TurtleBack
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Material:
High Strength Composite with Rubber Tips
|
23.39 |
|
|
RAM EZ-Strap Rail Mount w/Universal X-Grip Cell Phone Holder
The RAP-SB-187-UN7U consists of the RAM EZ-Strap base, double ball SHORT arm and universal X-Grip holder. The strap can be cut to fit tubing, square rails and irregular shapes from 0.5" to 2.58" in diameter. Multiple adjustment points allow you to move the universal X-Grip holder to your optimum viewing position. This mount rotates 180 degrees.
Compatible Devices (WITH OR WITHOUT CASE):
Apple iPhone 6
Apple iPhone 5s
Apple iPhone 5c
Apple iPhone 5
Apple iPhone 4S
Apple iPhone 4
Apple iPhone 3GS
Apple iPhone 3G
Apple iPhone
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung GALAXY S4
Samsung GALAXY S5
The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device 4. Rubber coated tips will hold device firm and stable
5. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
6. Single socket technology allows for multiple adjustment angles and articulation of device
7. Lifetime warranty
Material:
High Strength Composite & Stainless Steel
Note:
The "U" in the part number reflects product packaged in poly bag.
|
33.32 |
|
|
RAM Mount Universal X-Grip Holder Diamond Base Surface Mount
Part #: RAM-B-102-UN7U
The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.52 |
|
|
RAM Mount Universal X-Grip™ Holder Handlebar Rail Mount
Part #: RAM-B-149Z-UN7U
The RAM-B-149Z-UN7U consists of a double socket arm, handlebar rail mount with zinc coated u-bolt base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung Galaxy S7
Samsung Galaxy S7 Edge
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
58.96 |
|
|
RAM® Tough-Claw™ with Ratchet Extension Arm & Double Ball Mount
Get the length and stability needed to mount any tablet to a wheelchair for important use in the healthcare and rehab industries. The included Tough-Claw™ attaches to the wheelchair, securing the 8” Ratchet Extension Arm via the RAM ROD® Ratchet Attachment. With the extension, double socket arm, and round base all attached, choose a RAM tablet cradle – the Tab-Tite™, Tab-Lock™, EZ-Roll’r™ or 9”-10” / 11”-12” X-Grip® – to securely mount your device.
Specifications:
HARDWARE INCLUDED: Assembly Hardware
CLAMP RANGE: .625" - 1.14" diameter
SOCKET-TO-SOCKET LENGTH: Short Arm: 2.5"
HOLE PATTERN: 4-Hole AMPS: 1.181" x 1.496"
PLATE SIZE: 2.5" Diameter
BALL/SOCKET SIZE: C Size (1.5")
WEIGHT CAPACITY: Standard Use: 4 lbs/Heavy-Duty Use: 3 lbs
MATERIALS: High strength composite
PACKAGING TYPE: Poly Bag
WEIGHT: 1.4 lbs.
|
73.94 |
|
|
RAM Universal X-Grip Cell Phone Holder w/1" Ball
Part #: RAM-HOL-UN7BU
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
27.29 |
|
|
RAM® Twist-Lock™ Suction Cup Mount for Apple iPad mini 4 & 5
Ideal for aircraft windshields, the RAM® EZ-Roll'r™ cradle is designed specifically for a caseless Apple iPad mini 4 and iPad mini 5 consisting of a 3.3" diameter RAM® Twist-Lock™ suction cup base and medium-length double socket arm. The mount is designed with a RAM® 1" diameter B size patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles.
Features:
RAM® EZ-Roll'r™ cradle specifically designed for a caseless Apple iPad mini 4 and iPad mini 5
Includes RAM® Twist-Lock™ suction cup base for mounting to windshields and other nonporous surfaces as well as a B-size medium socket arm
Made of powder-coated, marine-grade aluminum and high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware
Suction Size: 3.3" Diameter
Socket to Socket Length: 3"
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2lbs/Heavy Duty Use: 1lb
Materials: Marine-grade aluminum, high-strength composite
Weight: 0.87lb
Compatibility:
Apple iPad mini 4
Apple iPad mini 5
|
48.68 |
|