|
RAM ROD® Fishing Rod Holder with Plunger Bulkhead Base
The RAM-114-BMP consists of the RAM ROD® Fishing rod holder with a 6" long spline post and a bulkhead base that is suitable for horizontal or vertical surfaces.
Specifications:
Product Dimensions: 6 in. post length
Hole Pattern: 1.3 x 3.19 inches
Materials: High-strength composite
Packaging Type: Retail header card
Weight: 1.2 lbs.
|
26.10 |
|
|
RAM Seat Tough-Wedge with 1" Ball Base & Standard Length Double Socket Arm
The RAM-B-407-201U consists of the Tough-Wedge™ and standard length double socket arm. The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. The standard length double socket arm measures 3.68" and will connect to all RAM cradles/adapters with a 1" ball.
Tough-Wedge™ Dimensions:
Length: 13.25"
Height: 8.25"
Depth: 1"
Inside Wedge Depth: 0.375" - 0.875"
|
63.47 |
|
|
RAM Seat Tough-Wedge Accessory with 1" Ball Base
The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. For capturing video on the go, place the Tough-Wedge™ in your backpack with a RAM camera mount. The included diamond adapter contains the industry standard AMPS hole pattern that allows attachment to a variety of RAM mounts. Hardware included to attach the Tough-Wedge™ to the mount.
The 1" diamond ball base is compatible with all RAM-B size single and double socket arms.
Tough-Wedge™ Dimensions:
Length: 13.25"
Height: 8.25"
Depth: 1"
Inside Wedge Depth: 0.375" - 0.875"
|
50.84 |
|
|
RAM® X-Grip®Wheelchair Seat Track Mount for 9"-10" Tablets
This kit includes a C size RAM® diamond ball base with a universal hardware pack that accommodates the seat track on most major wheelchair brands, including Invacare, Permobil, and Quickie. With the included short single socket arm, pipe extension, and double socket arm, connect the RAM® X-Grip® universal holder for 9”-10” tablets. The spring-loaded RAM® X-Grip® provides a perfect fit for your tablet and can be easily adjusted to the ideal position.
Specifications:
Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"
Included Mounting Hardware:
(QTY. 2) #10-32 x 1/2" Machine Screw
(QTY. 2) #10-32 T-Nut (3/8" x 5/8")
(QTY. 2) #10-32 T-Nut (1/2" x 1")
(QTY. 2) M4 x 12mm Machine Screw
(QTY. 2) M4 x 20mm Machine Screw
(QTY. 2) M4 Stainless Steel Washer
(QTY. 2) M4 Nylock Nut
Material: Powder Coated Marine Grade Aluminum & High Strength Composite
|
90.00 |
|
|
RAM Mount Universal Finger Grip Holder Surface Mount
Part #: RAM-B-138-UN4
Simply choose the base mounting hardware and the possibilities become endless with a RAM flat surface mount. Four mounting holes in the round ball base easily accommodate up to a #10 screw. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device.
Universal Finger Grip™ Holder Description:
The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount.
This mount is designed to hold the following devices:
Cell Phones
2-Way Radios
GPS Devices
Height Dimensions:
Minimum with Top and Bottom Plates: 5.25"
Maximum with Top and Bottom Plates: 6.0"
The top and bottom plates can be removed for larger devices.
Spine Plate Dimensions:
2.5W x 5.0H"
Using Short Arm Side Clamps:
Maximum Depth: 0.75"
Minimum Width: 1.25"
Maximum Width: 3.0"
Using Medium Arm Side Clamps:
Maximum Depth: 1.25"
Minimum Width: 1.5"
Maximum Width: 3.5"
Using Long Arm Side Clamps:
Maximum Depth: 1.6"
Minimum Width: 2.25"
Maximum Width: 3.5"
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
56.47 |
|
|
RAM Tube Jr.™ Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™ Base
Ideally suited for a wide range of applications and fishing vessels, the Tube Jr.™ Fishing Rod Holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD® Revolution Ratchet Arm and 1.5” Track Ball™. Combining the RAM® rubber ball and socket system with a ratcheting feature, this rod holder has almost unlimited adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of your boat or kayak. Compatible with virtually any track system including the RAM Tough-Track™.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM post spline bases
Compatible with spinning reels and level wind reels
Position spinning reel to the side or under RAM Tube Jr.
Compatible with left-handed and right-handed reels
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
Note:
Part number reflects product packaged in a poly bag
|
30.05 |
|
|
RAM-ROD® 2000 Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™Base
The RAM-114-RB-TRA1U consists of the RAM-ROD® 2000 fishing rod holder, ratchet arm with single open socket and 1.5" Track Ball™ base for any track system including the RAM Tough-Track™. The unique ball and socket with ratcheting feature allows for 360-degree rotation of the rod holder for optimal angle adjustments while on the water.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag
|
32.27 |
|
|
RAM Universal Finger-Grip™ Phone/Radio Holder
The RAM Composite Universal Finger Grip Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount.
This mount is designed to hold the following devices:
Cell Phones
2-Way Radios
GPS Devices
Height Dimensions:
Minimum with Top and Bottom Plates: 5.25"
Maximum with Top and Bottom Plates: 6.0"
The top and bottom plates can be removed for larger devices.
Spine Plate Dimensions:
2.5W x 5.0H"
Using Short Arm Side Clamps:
Maximum Depth: 0.75"
Minimum Width: 1.25"
Maximum Width: 3.0"
Using Medium Arm Side Clamps:
Maximum Depth: 1.25"
Minimum Width: 1.5"
Maximum Width: 3.5"
Using Long Arm Side Clamps:
Maximum Depth: 1.6"
Minimum Width: 2.25"
Maximum Width: 3.5"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
27.66 |
|
|
RAM Universal X-Grip Cell Phone Holder w/1" Ball
Part #: RAM-HOL-UN7BU
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
27.29 |
|
|
Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cradle w/1" Ball f/7" Tablets
The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 7" tablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 2.25"
Maximum Width = 5.75"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
RAM Highly Recommends adding a secondary tethering device for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.
|
84.79 |
|
|
RAM Composite 1" Ball Mount with 6.25" X 2" Rectangular Plate & Track Ball™ Base
The RAP-B-111B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 6.25" x 2" rectangle plate. The 6.25" x 2" rectangle plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The Track Ball™ base can connect to virtually any track system including the RAM Tough-Track™
Overall Height:
6"
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite Base
Marine Grade Aluminum Plate
Note:
Part number reflects product packaged in a poly bag.
|
30.60 |
|
|
RAM® Drink Cup Holder for Tracks
Designed for use with the track mounting system on your boat, kayak or cooler, the RAM® Drink Cup Holder for Tracks is the perfect cradle for your beverage when out on the water. Fitting a variety of cup sizes, a slot on the side even accommodates your favorite cup or mug with a handle. A drain hole at the bottom of the holder helps to prevent any buildup of residue, while hook slots on the side of the holder are perfectly placed for lures. The Drink Cup Holder is compatible with all versions of the RAM Tough-Track™, and features two attachment points – on the side for attaching to vertically mounted tracks, and on the bottom for attaching to horizontally mounted tracks.
Common Beverage Sizes:
- 12oz Cans
- Water Bottles
- Insulated Cups
- 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
15.44 |
|
|
RAM 1.5" Ball Mount with Track Ball™ Base & 2" x 4" Plate for the Humminbird Helix 7 ONLY
The RAM-202-24-354-TRA1U consists of a double socket arm mount, Track Ball™ base and 2" x 4" rectangular plate. The unique rubber ball and socket technology dampens shock and vibration while offering high adjustibility to achieve the perfect viewing angle. Compatible with any RAM Tough-Track™ system.
Compatible Devices:
Humminbird Helix 7
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in polybag
|
54.02 |
|
|
RAM 1" Ball Mount with Track Ball™ Base & 1.5" x 3" Plate for the Humminbird Helix 5 ONLY
The RAP-B-202-153-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 1.5" x 3" rectangular plate. The rectangular plate contains four holes that will line up with the Humminbird Helix 5. The Track Ball™ will connect to virtually any track system including the RAM Tough-Track™
Overall Height:
5"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball Size
Note:
Part number reflects product packaged in a poly bag. Hardware for mounting to device not included with purchase.
|
28.40 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Self-Leveling Cup Holder & Cozy
Drink Cup Mount Description:
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Motorcycle Handlebar Mount Description:
The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware for tubing that is 0.50" to 1.25" in diameter.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
38.78 |
|