|
RAM® Twist-Lock™ Composite Suction Cup Ratchet Mount with Diamond Plate
The RAP-B-104-224U, composite, ratchet/pivot, suction cup mount is a low profile, light weight and secure suction cup mount that is perfect for securing electronic devices in your mobile environment. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your electronic device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device.
Features:
Assembly Hardware Included
Suction Size: 3.3" Diameter
Hole Pattern: 2-Hole AMPS: 1.912"
Ball/Socket Size: B Size (1")
Weight Capacity: 2lbs
Materials: High Strength Composite
|
24.38 |
|
|
RAM EZY-Mount Quick Release Adapter System
Easy and convenient describe the RAM-EZY-Mount line of products.
Utilizing a quick release male to female union, these mounts are absolutely perfect for those who want the most secure, yet rapid release and portable kit possible.
How does it work? Mate an EZY-Mount male or female component to any RAM cradle or device with the standard AMPS hole pattern. Align the two parts and snap into place. To release, push back the release tab and go. One of the best features is the ability to easily swap out your GPS for MP3 or your radar detector for XM radio.
Material: High Strength Composite
|
9.48 |
|
|
RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series Fishfinders
The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds.
Compatible Devices:
Lowrance Elite-5
Lowrance Elite-5 DSI
Lowrance Elite-5 Gold
Lowrance Elite-5x
Lowrance Elite-5x DSI
Lowrance Elite-5m
Lowrance Elite-5m Gold
Lowrance Mark-5x
Lowrance Mark-5x DSI
Lowrance Mark-5x DSI Portable
Lowrance Mark-5x Pro
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this adapter base for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
RAM Double Socket Arm for 1.5" Ball Bases
The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" Ball
The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
45.52 |
|
|
ROKK Mini Quick Release Adapter for Lowrance HOOK & Simrad Crusie Displays
The ROKK Mini Quick Release was designed alongside Lowrance’s product design team.
The 360° rugged marine grade mount enhances your fishing experience by allowing you to mount, adjust and lock your display to the optimum position allowing you to spend more time fishing and less time re-adjusting. When you're done fishing for the day, simply release the ROKK Mini Quick Release and take home your catch.
Compatible with:
Lowrance HOOK² - 4X - 4 X GPS - 5 and 5X
Lowrance Hook Reveal 5"
Simrad Cruise 5
*Sold as an Individual
|
12.66 |
|
|
RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A
dapter
The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 2.25"
Clamping Range (Flat Surfaces):
0" to 2.2"
|
84.79 |
|
|
Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 12"
Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
89.99 |
|
|
Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 10"
Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.99 |
|
|
RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter
The RAM-B-166U, twist lock suction cup mount consists of a 3.25" suction cup locking base and diamond plate end. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment point at the cradle plate and base. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your iPhone in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your iPhone is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device.
Overall Length:
6.75"
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.
|
35.40 |
|
|
RAM Composite Twist Lock Suction Cup Mount for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc
The RAP-B-166-2-GA41U consists of a double socket arm, suction cup twist lock base, diamond adapter base and custom high strength composite cradle for the Garmin GPSMAP 62 series. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the suction cup GPSMAP mount to your optimum viewing position.
This mount is designed to hold the following devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
29.60 |
|
|
RAM Composite Twist Lock Suction Cup Mount w/ Diamond Adapter
Description:
The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
22.02 |
|
|
RAM Composite Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter
The RAP-B-166U consists of a double socket arm, 3.25" suction cup twist lock base and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.
|
27.70 |
|
|
RAM Composite Twist Lock Suction Cup Mount with Universal X-Grip Cell Phone Holder
The RAP-B-166-2-UN7U consists of a 2.75" twist lock suction cup base, double socket system and universal spring loaded X-Grip holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip is the cell phone holder evolved.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
The X-Grip holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
Spring loaded holder expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite and Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
43.80 |
|
|
RAM 3.25" Diameter Suction Cup Twist Lock Base with 1" Ball
Part #: RAM-B-224-1U
The RAM-B-224-1U consists of a 3.25" twist lock suction cup base that is connected to the diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
17.35 |
|
|
GDS® Locking Vehicle Dock for Apple iPad mini 4
The RAM® vehicle dock with GDS Technology™ is a spring loaded, quick release cradle that offers a secure fit with easy access to the mounted tablet. This docking station is compatible with the Apple iPad mini 4 with IntelliSkin®.
The integrated GDS Technology™ platform enables data and charging capabilities to the mounted tablet. Without the need to remove the IntelliSkin from the device, the user can quickly and efficiently mount the device in the vehicle dock and keep the device charged.
Compatible Devices:
Apple iPad mini with IntelliSkin®
Note: This version of the GDS® vehicle dock is not recommended for light, medium or heavy duty commercial vehicles. For these use cases, please use the RAM-GDS-DOCKL-V2-AP7U.
Features:
GDS Technology™ offers a universal charging platform for any device wrapped in IntelliSkin®
Modular design makes upgrading to a new tablet simple and cost effective
Keyed lock for theft deterrence
Easy, quick release of your tablet for on-the-go applications
Versatility of holder allows for attachment to many RAM mounting solutions
Lifetime warranty, 3 year on electronics
Made in U.S.A.
Specifications:
Max power: 5V-12V @ 2A*
Material: High Strength Composite
Weight: 1.2469 lbs.
*mUSB products supporting USB 2.0/3.0 will have a max current of 1.5A
|
110.12 |
|
|
RAM Composite Twist Lock Suction Cup Mount with Short Arm and No Ball Base
Ball Size: 1" Rubber Ball
Material: High Strength Composite
Color: Black
|
27.74 |
|