13' Bright Silver/Black Spike - Step Tube 1-3/8" - No Spreader The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by. Features: 13' Bright Silver/Black Spike MX Step-tube style No spreader

22' Bright Silver Outrigger Poles - 2" O.D. - Fits OH226S/OH234S Holders 22 ft. 6 Sections with Bright Silver Finish, and Black Spike. Fit the Lee Junior/Wishbone Style Holders with a 1 7/8 in. ID

Center Rigger Single Rig - No Release Clip 1 - Hanks Black Braided Line 1 - 5/16in x 12in Tension Cords 1 - Eye Straps with Screws 2 - Snap Swivels 1 - Ball Stops *Release Clip NOT Included

Center Rigger Single Rig RK0322RK/CR 1 - Hanks Black Braided Line 1 - Black's Release Clips 1 -5⁄16" x 12" Tension Cords 1 - Eye Straps with Screws 2 - Snap Swivels 1 - Ball Stops

15' Bright Silver/Black Spike - Step Tube 1-3/8" - No Spreader The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by. Features: 15' Bright Silver/Black Spike MX Step-Tube Style No Spreader

3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber. Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10

3/8" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber. Features:  Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Applications: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10

16' MKII Bright Silver Pole with Black Spike 1-3/8" OD - for Center Riggers 16' bright silver pole with black spike 1-3/8" OD for center riggers.

Teak Trim Ring 6-3/8" Diameter Trim Ring 4" Inner Diameter Opening 3/8" Thick 6" Inner Diameter (Inside Flange) Pre-Drilled Mounting Holes Back Recessed, 1/8" Flange Use to trim out portholes

Rail Mount Adjustable Rod Holder Fits Diameter 1-11/16" - Formed & Cast 316 Stainless Steel This Rail Mount Rod Holder can accommodate rods up to 1-11/16” in diameter. Features a front mount adjustment screw, allowing easy adjustment without having to disassemble the rail mount brackets. Designed to fit 7/8” to 1” diameter tubing. A leash on the rod and/or reel is recommended when using rail mount rod holders. Constructed of corrosion resistant formed and cast 316 stainless steel with black plastic end cap.

4 Hole Extra Long Swivel Rectangular Head Rod Holder - 0° - 12-1/2" Head Size: 4.25" x 4.75" Angle: 0° Head Length: 12-1/2" Inner Diameter: 1-7/8"

4 Hole Extra Long Swivel Rectangular Head Rod Holder - 15° - 12-1/2" Head Size: 4.25" x 4.75" Angle: 15° Head Length: 12-1/2" Inner Diameter: 1-7/8"

4 Hole Swivel Rectangular Head Rod Holder - 0° - 10-1/2" Head Size: 4.25" x 4.75" Angle: 0° Head Length: 10-1/2" Inner Diameter: 1-7/8"

4 Hole Swivel Rectangular Head Rod Holder - 15° - 10-1/2" Head Size: 4.25" x 4.75" Angle: 15° Head Length: 10-1/2" Inner Diameter: 1-7/8"

Teak Trim Ring 5-3/8" Diameter Trim Ring 3" Inner Diameter Opening 3/8" Thick 5" Inner Diameter (Inside Flange) Pre-Drilled Mounting Holes Back Recessed, 1/8" Flange Use to trim out portholes