|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
465.60 |
|
|
Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
513.60 |
|
|
Starlink High Performance 24" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
609.60 |
|
|
Starlink High Performance 36" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
710.40 |
|
|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - Black
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base
The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.
The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.
*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation.
Available in white or black
|
686.40 |
|
|
Starlink Wedge Base & Lighting Kit - White
This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.
This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedgebase, along with the 3NM LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.
The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation
Included Items:
ADAR1DMLTB - Top Plate
SVSLWB - Wedge Base
LTBR - Light Bar
LTBLED12 - Navigation Light
|
700.80 |
|
|
Starlink Wedge Base & Lighting Kit - Black
This Seaview wedge base kit caters to installations with restricted space, where additional height isn't required, yet an LED navigation light remains essential.
This kit comes with all the Seaview parts necessary to install the Starlink Flat High-Performance antenna on the 8° wedgebase, along with the 3NM LED combination mast head all-round light. The LED light is IP67 watertight with 7' of wire (12v) and USCG-approved for boats up to 20 meters (65.6') in length.
The aluminum light bar and 8° wedge base for the Starlink Flat High-Performance antenna have been specifically designed for the marine environment (3-part polyurethane prime and powder coat to ensure the best possible finish and corrosion resistance).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation.
Included Items:
ADAR1DMLTBBLK - Top Plate
SVSLWBBLK - Wedge Base
LTBRBLK- Light Bar
LTBLED12BLK - Navigation Light
|
700.80 |
|
|
Modular Plate for Intellian/KVH/Glomex/Thrane & Thrane/Raymarine/Sea-King/Sea-Tel/VDO
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
|
182.40 |
|
|
Modular Plate for KVH/Intellian/Raymarine/Sea-King/Sea-Tel/VDO
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
|
254.40 |
|
|
Modular Plate for Glomex/Intellian/KVH/Thrane & Thrane/Raymarine/VDO
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
King Starboard
Made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.
|
235.20 |
|
|
8' Starlink Mast Pole Kit with Standoff Kit
Seaview offers an 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with an adjustable base that has a small 5-1/4" x 3" footprint and a water-tight Cable Seal, which can be easily disassembled for pole removal.
The pole itself is 3" in diameter and is made from marine-grade aluminum. Seaview takes the finish to another level by first taking the raw aluminum and putting it through a process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process, it is taken through a 3-part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.
Fixed Top Plate
A Seaview Top Plate is included with each pole kit to fit closed dome radars. No longer the unwanted “Swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. An anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
Supports
Several strut supports depending on which Seaview Pole Kit you choose. A rail stand-off kit and a 48" long strut.
Rail Stand-off Kit - The rail stand-off kit includes two turnbuckle style struts that are adjustable from 6" to 12", two stainless steel 3" pole clamps, and two stainless steel 1" rail clamps.
48" Struts - Also made from highly polished stainless steel are the 48" long struts.
Adjustable Base
A hard anodized adjustable base with a water-tight Cable Seal. The adjustable base measures 5-1/4" x 3".
|
1617.60 |
|
|
Modular Plate for Most Closed Dome and Open Array Radars
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
|
139.20 |
|
|
Modular Plate for Most Closed Domes & Open Arrays - Black
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top Plates
King Starboard
The ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.
|
134.40 |
|