Hydra-Cell H25XFBVHFEC-A Pump Brass - Viton Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps. Simple, compact design reduces initial investment and lowers maintenance costs. Operational efficiencies reduce energy costs. Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error. Tolerates non-ideal operating conditions. Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace. Maximum Discharge Pressure Metallic Heads:1000 psi (69 bar) Maximum Inlet Pressure250 psi (17 bar) Maximum Operating Temperature Metallic Heads:250˚F (121˚C) - Consult factory for correct component selection for temperatures from 160 ̊F (71 ̊C) to 250 ̊F (121 ̊C). Non-metallic Heads:140˚F (60˚C) Maximum Solids Size800 microns Inlet Port1-1/2 inch NPT Discharge Port1 inch NPT Shaft Diameter1-1/8 inch (28.6 mm) Shaft RotationReverse (bi-directional) BearingsTapered roller bearings Oil Capacity3.3 US quarts (3.1 liters) 

Hydra-Cell H25SKPEHFTHC Pump Polypropylene/Epdm Non-metallic Heads: 250 psi (17 bar) Polypropylene 350 psi (24 bar) PVDF Maximum Inlet Pressure: 250 psi (17 bar) Maximum Solids Size: 800 microns Inlet Port: 1-1/2 inch NPT Discharge Port: 1 inch NPT Shaft Diameter: 1-1/8 inch (28.6 mm) Shaft RotationReverse (bi-directional) Bearings: Tapered roller bearings Oil Capacity: 3.3 US quarts (3.1 liters)

Hydra-Cell D10XKCGHFEYA 8Gpm Pump Maximum Flow Rate:8.8 gpm (33.4 l/min) Maximum Pressure:1500 psi (103 bar) for Metallic Pump Heads, 350 psi (24 bar) for Non-metallic Pump Heads   Image is D10, may not be correct Model

Hydra-Cell K35-002-1244 The Hydra Cell K35-002-1244 is what is called a loaded cylinder housing. This part includes the cylinder housing, all 5 piston assemblies, 5 Buna diaphragms, plungers, follower and follower screws all assembled together.   Lead Time is usually 3 to 4 weeks

Hydra-Cell K10-014-1210 Piston Assy Kel-Cell Kel-Cell Piston This is a replacement piston for industrial pumps. Designed for use with Hydra-Cell D10 and G10 Series pumps. Includes D10 pumps with metallic heads. Genuine OEM replacement part from Hydra-Cell. Specifications: For use with Hydra-Cell D10 (Metallic Head) and G10 Series Pumps  

Hydra-Cell D10K52THFEC Kit High Flow Fluid End Service Kit Complete fluid end kit for Wanner Hydra-Cell D10 pumps. Contains replacement valves and diaphragms for full service of pumps. OEM pump servicing kit reduces cost by allowing you to repair and maintain your own pump, and features manufacturer support! Kit Includes: Threadlock  D10-018-2320 - Buna-N diaphragm (3)  D10-047-2110 - Follower O-ring (3) D10-074-2110 - Outer Manifold O-ring (1) D10-073-2110 - Inner Manifold O-ring (1) D10-083-2110 - Center Bolt O-ring (1) D10-035-2110 - Valve Seat O-ring (6) D10-020-1010 - Stainless Steel Valve Seat (6) D10-021-1015 - Stainless Steel Valve (6) D10-022-3117 - Valve Spring (6) D10-023-2310 - Celcon Valve Spring Retainer (6) D10-092-2110 - Buna-N Tetra Seal (6)

Hydra-Cell K10-002-1020 Cylinder Use this part to replace broken or damaged cylinder housings in Hydra-Cell industrial pumps. Designed for D10 and G10 industrial pumps. Hydra-Cell official OEM part.

Hydra-Cell D25K52THFEC Repair Kit Buna Mech Seal Fluid End Service Kit Complete fluid end kit for Wanner Hydra-Cell D10 pumps. Contains replacement valves and diaphragms for full service of pumps. OEM pump servicing kit reduces cost by allowing you to repair and maintain your own pump, and features manufacturer support! Kit Includes: Threadlocker  D25-018-2320 - Buna-N diaphragm (3)  D25-047-2110 - Follower O-ring (3) D25-074-2110 - Outlet Valve O-ring (1) D25-097-2110 - Outer Manifold O-ring (1) D25-073-2110 - Inner Manifold O-ring (1) D10-083-2110 - Center Bolt O-ring (1) D25-035-2110 - Valve Seat O-ring (6) D25-020-1010 - Stainless Steel Valve Seat (6) D25-021-1015 - Stainless Steel Valve (6) D25-022-3114 - Valve Spring (6) D25-023-2310 - Celcon Valve Spring Retainer (6) D25-092-2110 - Buna-N Tetra Seal (6)

Hydra-Cell D03-018-1220 Diaphragm Buna Non Kel-Cell

Hydra-Cell A04-001-1200 D10 Adapter Hydra-Cell A04-002-1200 Pump/Motor Adapter Kit for D-10 NEMA 182/184TC-213/215TC size motor.

Hydra-Cell H25EKCGHFEHA Pump 20Gpm with Cast Iron Head Hydracell H25EKCGHFEHA Diaphragm Pump, 20 GPM, 1" NPT Inlet x 1-1/2" NPT Outlet, 1000 PSI, Cast Iron Head

Hydra-Cell D10-048-2010 Washer Split-Lock 3/8"

Hydra-Cell G10-088-2010 Bolt Valve Plate

Hydra-Cell D10-047-2110 O'Ring Buna

Hydra-Cell D10-083-2110 O'Ring Buna