84" Water Sport Towable "Matador - The Bull" - 2-Rider Features: 1-2 riders–Comfortable fabric seating area Double-stitch nylon cover and padded, easy-grip nylon handles Heavy-duty bladder Triple-reinforced tow harness Boston valve for fast and easy inflation/deflation Specifications:  Inflated size: 84” L x 36” W (213cm x 91cm) 24G PVC body/22G PVC sides Weight capacity: 340lbs  Ages: 15 and up

82" Water Sport Towable "Hammerhead - The Shark" - 2-Rider Features: 1-2 riders–Comfortable fabric seating area Double-stitch nylon cover and padded, easy-grip nylon handles Heavy-duty bladder Triple-reinforced tow harness Boston valve for fast and easy inflation/deflation Specifications:  Inflated size: 82” L x 34” W (208cm x 86cm) 24G PVC body / 22G PVC sides Weight capacity: 340lbs  Ages: 15 and up

4" BM40AMPBT Amplified Waketower Speakers - Matte Black - 500W These Matte Black 8" BM40AMPBT Amplified waketower speakers provide next-level audio through a stylish design.  Boss Audio  tower speakers are marine grade, so you can have outstanding sound quality on your boat or UTV.  Features: Full-Range Class D Amplifier Fits 1" to 2" wake tower pipes IPX5 rated in-line remote w/illuminated soft-touch controls Polypropylene Woofer Cone and Rubber Surround 1" Tweeter Technical Specifications: Speaker Impedance - 4 ohms Cone Material - Water-Resistant IMPP Sensitivity - 94dB Frequency Response - 45HZ - 20KHZ Max Power - 500W 250 Watts RMS Dimensions (W x L x H) - 5.54" x 7.17" x 7.43" Weight 5.58 lbs In the Box: Two (2) 2-Way waketower speaker Bluetooth multi-function controller  Power wire harness Mounting hardware Instruction manual *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Balder 2 Windlass - 600W, 1/4" Chain & 1/2" Rope Below Deck Features: 600W Motor 12V 1/4" Chain and 1/2" Rope Boat Lenght: 16-26FT Horizontal windlasses Maximum flexibility of installation AISI 316 Stainless steel and chromed bronze Integrated sensor and magnet for chain counter Rope and chain on a single gypsy Automatic system of anchor-rode free-fall Supplied with the chain guide device Supplied with pressure lever, Mounting Bracket, T6415-12 solenoid

Balder 2 Windlass - 900W 1/4" Chain & 1/2" Rope Below Deck Features: 900W Motor 12V 1/4" Chain and 1/2" Rope Boat Lenght: 16-29FT Horizontal windlasses Maximum flexibility of installation AISI 316 Stainless steel and chromed bronze Integrated sensor and magnet for chain counter Rope and chain on a single gypsy Automatic system of anchor-rode free-fall Supplied with the chain guide device Supplied with pressure lever, Mounting Bracket, T6315-12 solenoid

X-Series X4 - Midnight Blue LEDs The OceanLED X-Series X4 combines brightness with affordability. Whether cruising or fishing, the X4 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X4 outputs an impressive 1,150 Fixture lumens from its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose Midnight Blue or Ultra White color options. one app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 1,450 Lumens / 1,150 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 30' (9M) Transom / Hull spacing: 2-3' (0.5-1.0M) Transom quantity: 2-4 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150W metal halide Fixture Lumens* (total light output from a finished fixture): 1,150 Lumens: 1,450 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 0.8A @ 12V DC - 0.4A @ 24V DC Approx. light penetration (avg. water quality): 20' (6M) Approx. Light penetration (perfect water quality): 45' (13+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 5.4" (137mm) x 2.91" (74mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.70kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: AB2 Lens material: Pilkington Optiwhite Body construction: Chemically resistant optical polymer Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 4 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X8 - Midnight Blue LEDs The X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 2,900 Lumens / 2,300 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 50' (15M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 50W Xenon Fixture Lumens* (total light output from a finished fixture): 2,300 Lumens: 2,900 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC Approx. light penetration (avg. water quality): 26' (8M) Approx. Light penetration (perfect water quality): 72' (21+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 8.62" (219mm) x 3.07" (78mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.34kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 8 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X16 - Midnight Blue LEDs The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 5,800 Lumens / 4,500 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

Prop Master Propeller Wrench The Prop Master™ is the original molded propeller wrench. This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master™ is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master™ will tighten all 1 1/16" propeller nuts without slipping or stripping. (OMC, Johnson and Evinrude, - over 40 HP, Mercury - over 50 HP) High visibility color makes it easy to locate in dark boat compartments. The Prop Master™ also has a 9/16" garboard drain plug socket on the reverse side. Will not corrode in the salt water environment. Features: Fits All 1-1/16” Prop Nuts (40hp & up) Rugged Nylon Resists Stripping 9/16” Garboard Drain Socket on Back Non-Corrosive in Salt Environment High Visibility Yellow makes wrench easy to find WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

KeelGuard® - 4' - Blue The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else. Megaware KeelGuard® Engineering Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability. Megaware KeelGuard® Colors & Sizes Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths. Lifetime Warranty Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat. Features: Color: Blue KeelGuard® Size: 4' Boat Size up to 14' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA

KeelGuard® - 5' - Blue The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else. Megaware KeelGuard® Engineering Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability. Megaware KeelGuard® Colors & Sizes Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths. Lifetime Warranty Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat. Features: Color: Blue KeelGuard® Size: 5' Boat Size up to 16' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA

KeelGuard® - 6' - Blue The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else. Megaware KeelGuard® Engineering Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability. Megaware KeelGuard® Colors & Sizes Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths. Lifetime Warranty Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat. Features: Color: Blue KeelGuard® Size: 6' Boat Size up to 18' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA

KeelGuard® - 7' - Blue The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else. Megaware KeelGuard® Engineering Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability. Megaware KeelGuard® Colors & Sizes Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths. Lifetime Warranty Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat. Features: Color: Blue KeelGuard® Size: 7' Boat Size up to 20' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA

KeelGuard® - 8' - Blue The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else. Megaware KeelGuard® Engineering Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability. Megaware KeelGuard® Colors & Sizes Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths. Lifetime Warranty Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat. Features: Color: Blue KeelGuard® Size: 8' Boat Size up to 22' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA

KeelGuard® - 9' - Blue The Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & Ramps Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else. Megaware KeelGuard® Engineering Every aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability. Megaware KeelGuard® Colors & Sizes Megaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths. Lifetime Warranty Megaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat. Features: Color: Blue KeelGuard® Size: 9' Boat Size up to 24' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA