|
SG Handle with Fuse Line - White
Hyperlite's SG handle is a Pro Level Handle with a sublimated Stitched Grip including lightweight endcaps.
SG may also reference Sticky Grip or Soft Grip, either way the SG Packages deliver a Solid Grip.
Features:
Handle Floats
ARS (Anti-Roll System) Endcaps
3 Take off loops
15" Handle Bar Length
Fuse Line with 3 – 5' Sections
75' Total Length
|
113.12 |
|
|
Universal Grab Handle w/Comfort Grip - Black
Flexible grab handle for flush, flexible mounting. Can be mounted to a variety of irregular surfaces and angles on swim platform, in the cockpit and companionway. Constructed from soft polypropylene webbing over a semi-rigid core. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might come in contact with them.
They meet the ABYC H-41 standard for strength: "withstand a load of 400lbs in any direction."
All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.
|
10.03 |
|
|
Yamada NDP-50BPE 2" Poly/E Pump
NDP-50BPE AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS
Yamada® NDP-50BPE series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 166 gallons per minute. Pumps are available in aluminum, stainless steel (316), cast iron, polypropylene, and Kynar construction, with a wide variety of diaphragm materials.
Inlet (in)2
Outlet (in)2
Max Flow (gpm)164.0
Max Temp212
Max Solid (in)5/16
Valve Type (in)3/4
Air Motor MaterialAluminum
Body MaterialPolypropylene
Elastomer MaterialEPDM
|
3923.80 |
|
|
RAM Tough-Tube Fishing Rod Holder w/3" Long Ratchet Spline Post Arm
The RAP-394-SSTU consists of the TOUGH-TUBE fishing rod holder and 3" long ratchet spline post arm. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Easily integrate the RAP-394-SSTU to your existing spline post base, or choose from an assortment of RAM compatible bases.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom designed for heavy chop environments
Mount virtually anywhere on heavy rigged kayaks without hinderance
Lifetime warranty
Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
The "U" in the part number reflects product packaged in poly bag.
|
17.68 |
|
|
RAM STACK-N-STOW Bait Board w/18" Pipe, Post & Spline
The RAP-395-PSP-18U consists of the RAM STACK-N-STOW Bait Board and 18" long pipe with spline post. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With spline post, located on the bottom of the 18" long pipe, easily integrate it to your existing spline post base, or choose from an assortment of RAM compatible bases. With the 18" long pipe, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board.
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
35.64 |
|
|
65lb Kit Line Assembly
Features:
Ready Rigged Kite Line
250′ of 65 lb Hi-Vis Yellow 8 Strand Braid
Three release clips
Swivels on a reusable spool and mesh bag
|
50.53 |
|
|
Haight Pump 6EU-VM-CG-OT Pump Vit Mech Seal Cbn Brgs
Specifications
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 6 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
* reduce maintenance expenses - simple, quick seal changes
* less production disruption and downtime - perform maintenance in place rather than in the shop
* reduce maintenance inventory - one pump can be adapted to meet many application requirements
* provide future adaptability - easily change the pump as your needs change
* reduce replacement parts costs, no special custom design parts
* interchangeable with existing Haight pumps without modification
* pumps specified with an integral relief valve can be quickly and easily changed to perform in either suction return, or tank return mode. The relief valve can be readily changed to operate in either clockwise or counterclockwise flow direction.
|
1380.23 |
|
|
Flexible Grab Handle with Molded Grip
Great for kayaks, cooler handles and grab handle. It is an inexpensive, quality solution for all of your lifting needs.
Specifications:
Length: 9-3/8"
Color: Black
Material: Polypropylene
Webbing: Polpropylene
Handle: Molded Polypropylene
Fastener: #12 (2)
|
6.16 |
|
|
Hypro 4101Xl-H, Roller Pump
Performance Information
Max. flow: 7 gpm/26.5 lpm at 2600 rpm
Max. pressure: continuous 100 psi/6.9 bar
Max. pressure: intermittent 150 psi/10.3 bar
Max. rated speed: 2600 rpm
Other Attributes
Rollers: Super Rollers standard (Poly, Teflon and Buna-N available)
Housing: Cast Iron, Ni-Resist or Silvercast
Port size: 3⁄4" NPT
Shaft size: 5⁄8" Solid
Pump shaft rotation: CW
Shaft Seals: Viton standard (Buna-N available)
Available shaft adapters
Rotor: Cast Iron, Ni-Resist or Silvercast
Standard rotation directly couples to gasoline engines
Special torque arm and base kit is available for gas engines
|
612.31 |
|
|
RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 6" Post
The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 6" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 6" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling.
Features:
Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops
Includes RAM® Tube Jr.™ rod holder with 6" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks
The locking button prevents the base from spinning loose with rod holder movement
Quick-release mechanism for easy installation and removal of rod holder
Backed by a lifetime warranty
Specifications:
T Bolt Dimensions: .48" x .95"
Post Length: 6"
Materials: High-strength composite
Packaging Type: Poly Bag
Weight: 1.02lbs
|
27.71 |
|
|
RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 4" Post
The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 3.75" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 3.75" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ Base is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling.
Features:
Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops
Includes RAM® Tube Jr.™ rod holder with 3.75" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks
The locking button prevents the base from spinning loose with rod holder movement
Quick-release mechanism for easy installation and removal of rod holder
Backed by a lifetime warranty
Specifications:
T Bolt Dimensions: .48" x .95"
Post Length: 3.75"
Materials: High-strength composite
Packaging Type: Poly Bag
Weight: 0.94lbs
|
26.16 |
|
|
Webbing Handle with Caps Kit
This Webbing Lift Handle is easy to hold even when wet. Ideal for the replacement of worn or torn handles or to add another handle to make it easier to carry your kayak, paddleboard, or canoe. Works as both end and side carry handles. Constructed of nylon webbing with an injection molded nylon handle. Installs with two #10 RH fasteners (not included) or on an inflatable boat with the use of the proper adhesive.
Kit Includes:
Webbing handle (1)
End caps (2)
10-32 X 1" PH machine screws (2)
10-32 Nyloc nuts (2), and #10 Fender washers (2)
Nylon end caps
|
7.60 |
|
|
SHUR-LOK HANDLES
"One Handle Does It All"
30" Fixed Length Handle with finger grip
"Great for use with Nets and Gaffs"
Shurholds exclusive SHUR-LOK quick release system positively locks any Shurhold handle quickly and easily with all Shurhold accessories.
The SHUR-LOK design guarantees that Shurhold attachments will
never spin or pop off during use.
|
15.58 |
|
|
SHUR-LOK HANDLES
"One Handle Does It All"
60" Fixed Length Handle with finger grip
"Great for use with Nets and Gaffs"
Shurholds exclusive SHUR-LOK quick release system positively locks any Shurhold handle quickly and easily with all Shurhold accessories.
The SHUR-LOK design guarantees that Shurhold attachments will
never spin or pop off during use.
|
31.18 |
|
|
SportAbout Compass w/Tie-Down Holder
Ritchie SportAbout X-11Y compass included with X-TD Tie-down mounting.
No Drilling, No Holes in Deck
Flexible Pad and Foam Ring Easily Conforms to Deck Shape
Won't Scratch Finishes
Attaches with Bungee Cord and Clips (included)
|
59.99 |
|