|
SG Handle with Fuse Line - White
Hyperlite's SG handle is a Pro Level Handle with a sublimated Stitched Grip including lightweight endcaps.
SG may also reference Sticky Grip or Soft Grip, either way the SG Packages deliver a Solid Grip.
Features:
Handle Floats
ARS (Anti-Roll System) Endcaps
3 Take off loops
15" Handle Bar Length
Fuse Line with 3 – 5' Sections
75' Total Length
|
113.12 |
|
|
Universal Grab Handle w/Comfort Grip - Black
Flexible grab handle for flush, flexible mounting. Can be mounted to a variety of irregular surfaces and angles on swim platform, in the cockpit and companionway. Constructed from soft polypropylene webbing over a semi-rigid core. Because of the soft, pliable webbing in these handles and the absence of any sharp edges, they are safe in areas where occupants might come in contact with them.
They meet the ABYC H-41 standard for strength: "withstand a load of 400lbs in any direction."
All materials are non-corrosive, UV stable and mildew-resistant. Four holes for required #12 fasteners.
|
10.03 |
|
|
Jabsco 54681-0001B End Cover W/Rv Hyline 6
|
5038.43 |
|
|
Jabsco 54481-0001B End Cover W/Rv Hyline 4
|
2660.74 |
|
|
Jabsco 54581-0001B End Cover W/Rv Hyline 5
|
3252.03 |
|
|
Haight Pump 6EU-VM-CG-OT Pump Vit Mech Seal Cbn Brgs
Specifications
Gear Design: Involute Gear
Construction Material: Ductile Iron
Capacity (max): 6 gpm
Discharge Pressure (max): 250 psi
Temperature: 620 degrees F
* reduce maintenance expenses - simple, quick seal changes
* less production disruption and downtime - perform maintenance in place rather than in the shop
* reduce maintenance inventory - one pump can be adapted to meet many application requirements
* provide future adaptability - easily change the pump as your needs change
* reduce replacement parts costs, no special custom design parts
* interchangeable with existing Haight pumps without modification
* pumps specified with an integral relief valve can be quickly and easily changed to perform in either suction return, or tank return mode. The relief valve can be readily changed to operate in either clockwise or counterclockwise flow direction.
|
1380.23 |
|
|
Webbing Handle with Caps Kit
This Webbing Lift Handle is easy to hold even when wet. Ideal for the replacement of worn or torn handles or to add another handle to make it easier to carry your kayak, paddleboard, or canoe. Works as both end and side carry handles. Constructed of nylon webbing with an injection molded nylon handle. Installs with two #10 RH fasteners (not included) or on an inflatable boat with the use of the proper adhesive.
Kit Includes:
Webbing handle (1)
End caps (2)
10-32 X 1" PH machine screws (2)
10-32 Nyloc nuts (2), and #10 Fender washers (2)
Nylon end caps
|
7.60 |
|
|
SHUR-LOK HANDLES
"One Handle Does It All"
30" Fixed Length Handle with finger grip
"Great for use with Nets and Gaffs"
Shurholds exclusive SHUR-LOK quick release system positively locks any Shurhold handle quickly and easily with all Shurhold accessories.
The SHUR-LOK design guarantees that Shurhold attachments will
never spin or pop off during use.
|
15.58 |
|
|
SHUR-LOK HANDLES
"One Handle Does It All"
60" Fixed Length Handle with finger grip
"Great for use with Nets and Gaffs"
Shurholds exclusive SHUR-LOK quick release system positively locks any Shurhold handle quickly and easily with all Shurhold accessories.
The SHUR-LOK design guarantees that Shurhold attachments will
never spin or pop off during use.
|
31.18 |
|
|
Power Grip Plus
1176
"Stacker" - 6" Leader
4 1/4" in length
Streamlined design won't snag on weeds or foul lines
Greater range of release tensions
"tension adjuster" doubles the holding power if needed
Large, easy to handle shape
The line release is the critical link between the downrigger and the fishing rod. If it does not perform properly you will lose both valuable fishing time and fish. The fishing lien is gripped between the soft pads with variable release tension attained by moving the line in or out of the jaws. The line release is attached to either the weight or the cable."tension adjuster" doubles the holding power.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.15 |
|
|
Power Grip Plus
1178
60" Wire leader with stacking, self-locating snap
4 1/4" in length
Streamlined design won't snag on weeds or foul lines
Greater range of release tensions
"tension adjuster" doubles the holding power if needed
Large, easy to handle shape
The line release is the critical link between the downrigger and the fishing rod. If it does not perform properly you will lose both valuable fishing time and fish. The fishing lien is gripped between the soft pads with variable release tension attained by moving the line in or out of the jaws. The line release is attached to either the weight or the cable. "tension adjuster" doubles the holding power.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.49 |
|
|
Flexible Grab Handle with Molded Grip
Great for kayaks, cooler handles and grab handle. It is an inexpensive, quality solution for all of your lifting needs.
Specifications:
Length: 9-3/8"
Color: Black
Material: Polypropylene
Webbing: Polpropylene
Handle: Molded Polypropylene
Fastener: #12 (2)
|
6.16 |
|
|
Voyager 2-Person Inflatable Boat Kit with Oars and Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
360 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
52.81 |
|
|
Voyager 3-Person Inflatable Boat Kit with Oars & Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
600 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
70.93 |
|
|
Voyager 4-Person Inflatable Boat Kit with Oars & Pump
Inflatable fishing boat ideal for protected waters and up to three people. Four-chamber, double hull, heavy-duty construction with I-beam flooring. Accepts up to 2 HP motors with optional #30050 motor mount (not included). Integrated with bow handle, grab lines, and swivel oar locks.
Features:
750 lbs weight capacity
4 chamber, double hull heavy-duty construction with I-beam flooring
Inflatable bolster seat(s) included
Fishing rod holder
Handle and grab lines
Swivel oar locks
In the Box:
Boat
Oars
Pump
|
93.76 |
|