|
Faucet Waxx Plus - 7.6oz Bottle
Keeps faucets & fixtures looking fabulous. Seals, polishes & protects. Exclusive creme-like carnauba & beeswax formula won’t scratch.
Safe For:
Gold-plated finishes, living finishes, oil-rubbed finishes, clearcoat, lacquer, acrylics, fiberglass, powdercoat, polyurethane, granite, marble, Corian,® and other solid surfaces. Will not dull polished metal.
Use On:
Faucets, doors, outdoor lighting fixtures, tubs, showers, vanities, fireplace doors...
Removes & Protects Against:
Fingerprints, carbon, soot, makeup, hair spray, soap & lime desposts.
|
13.38 |
|
|
AquaMax® Holding Tank Treatment - 6-Pack - 8oz Liquid - Spring Shower Scent
AquaMax® Holding Tank Treatment’s advanced enzyme powered formulas neutralize odors and accelerate waste digestion to prevent clumping, clogging and tank residue, all at the same time. Thetford’s beneficial probiotic treatments are Bronopol and Formaldehyde free.
Features:
Enzyme-based holding tank treatment
Breaks down waste and eliminates offensive odors
Bottles with child-resistant caps
Available in one-gallon jug, 64-oz. bottle, 32-oz. bottle, and 6 pack of 8-oz. bottles
Easy dosing system: 8-oz of AquaMAX® treats a 40-gallon holding tank
Formaldehyde free
Bronopol free
Neutralizes odor
Breaks down waste to prevent clumping, clogging and tank residue
Enzymes optimized for MAX performance
Beneficial probiotics; good bacteria
Septic system safe
Campground and marina friendly
Compliant with all current regulations
Available as a liquid, dry granule or Toss-Ins®
|
12.18 |
|
|
Rhino Premium RV Holding Tank Treatment - 8 Single 4oz Bottles
Camco's Rhino Premium Enzyme RV Holding Tank Treatment Singles contain an enzyme complex that digests waste, tissue, fats, and proteins. This treatment activates when diluted. Just (1) bottle treats up to 40 gallons and stops odors for up to 7 days. All components are biodegradable, septic safe, and do not contain harmful formaldehyde, pesticides, or biocides. Includes (8) 4 oz. bottles. Fragrance: pine scent. Made proudly in the USA. Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help you take your passion for the outdoors to the next level.
Features:
RV Toilet Treatment: Contains an enzyme complex that digests waste, tissue, fats, and proteins; Activates when diluted
Ultra-Concentrated Formula: Just (1) bottle treats up to 40 gallons; Stops odors for up to 7 days
Environmentally Friendly: All components are biodegradable and septic safe; Does not contain harmful formaldehyde, pesticides, or biocides
Great Smell: Pine scent; Quantity: (8) 4 oz. bottles
Made in the USA: The product is proudly made in the USA
|
12.38 |
|
|
TastePURE Drinking Water Freshener - 16oz Bottle
Camco TastePURE Drinking Water Freshener helps to eliminate algae and slime from your drinking water tank. Just 1 ounce for every 20 gallons of water helps remove bad smells and tastes.
Features:
Prevents algae and slime buildup from RV drinking water tanks
Just 1 oz. helps remove bad smells and taste from 20 gallons of water
Keeps stored fresh water tasting and odor free
16 oz. bottle
Easy to use
|
5.33 |
|
|
Dek Magic 32oz Spray Cleaner for SeaDek
Dek Magic is formulated specifically for SeaDek. Removes fish blood, grease, oil, wine, and more. This 32 oz bottle is perfect for fighting those tough stains.
Features:
Environmentally friendly
Formulated specifically for SeaDek
Tackles tough stains
Removes fish blood, grease, oil, wine, and more
Specifications:
Size: 32oz bottle
*Sold as an individual bottle
|
23.50 |
|
|
General Pump 100295 Oil 30W 16 Oz
30W viscosity, non-detergent.
Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston, and plunger pumps.
Resists formation of harmful oil water emulsions
Exceeds wear prevention requirements of all major.
One Pint Bottles.
|
18.20 |
|
|
Dek Magic 32oz Spray Cleaner for SeaDek *Case of 12*
Dek Magic is formulated specifically for SeaDek. Removes fish blood, grease, oil, wine, and more. These 32 oz bottles are perfect for fighting those tough stains.
Features:
Environmentally friendly
Formulated specifically for SeaDek
Tackles tough stains
Removes fish blood, grease, oil, wine, and more
Specifications:
Size: 32oz bottle
*Sold as a pack of 12
|
249.84 |
|
|
Reactor™ 40 Steer-By-Wire Corepack for Yamaha® Helm Master® with GHC™ 50 Autopilot Instrument
Every Captain Needs a Co-Pilot. Designed for powerboats, this Reactor 40 hydraulic autopilot gives you the extra hand you need, so you can explore paradise worry-free.
Features:
This Reactor 40 corepack is the perfect companion for your hydraulically steered system.
Yes, it features a solid-state 9-axis AHRS. And yes, that means you can mount it nearly anywhere.
Even when you’re pitching or rolling, this autopilot reacts to sea conditions to keep you on course.
You just want to get on the water, so we made calibration fast and easy. That’s the power of simplicity.
Combine with your compatible Garmin chartplotter, and control your autopilot — from anywhere on your boat.
Want more? The optional GHC™ 50 autopilot instrument enhances your autopilot experience.
COREPACK COMPATIBILITY
This corepack works with yachts that have a Yamaha Helm Master system, and it requires a compatible Garmin chartplotter
SOLID-STATE 9-AXIS AHRS
With its advanced solid-state 9-axis AHRS, you can mount Reactor 40 nearly anywhere, in any orientation. It even reduces power consumption, minimizes heading error, and more.
REACTS TO WATER CONDITIONS
Hold your course on the sea — this autopilot reacts to conditions, so you can remain confident even when you’re pitching or rolling.
SIMPLE CALIBRATION
All autopilots require commissioning and calibration. Reactor 40 makes it quick and easy.
WIRELESS REMOTE CAPABILITIES
Control your autopilot from anywhere on your boat by using your compatible Garmin devices, including the Reactor autopilot remote, select quatix® marine smartwatches, and more (requires a compatible Garmin chartplotter or GHC 50 autopilot instrument).
OPTIONAL GHC 50 BUNDLE
Combine the Reactor 40 hydraulic autopilot with the GHC 50 autopilot instrument to add a dedicated touchscreen autopilot display to your helm. Plus, GHC 50 allows you to share data and settings with Garmin MFDs and other installed Garmin devices.
POWERBOAT AND SAILING FEATURES
When connected to your compatible Garmin chartplotter, all Reactor 40 corepacks offer powerboat and sailing features, including heading hold and step turns — plus wind hold and tack/jibe when paired with a wind sensor (sold separately). You can even gain additional benefits such as the following route and Auto Guidance+™ features1.
CCU Specifications:
Dimensions: 3 19/32" diameter (91.4 mm)
Weight: 5.6 oz (159 g)
Temperature range: From 5°F to 131°F (from -15°C to 55°C)
Case material: Fully gasketed, high-impact plastic, waterproof to IEC 529 IPX7 standards
CCU cable length: 9.5 ft (3 m)
NMEA 2000 power input: 9-16V
NMEA 2000 LEN: 3 (150 mA)
Buzzer/Alarm Specifications:
Dimensions (L × Diameter): 29/32" × 1" (23 mm × 25 mm)
Weight: 2.4 oz (68 g)
Temperature range: from 5°F to 131°F (from -15°C to 55°C)
Cable length: 10 ft (3.0 m)
Autopilot Gateway Specifications:
Dimensions (L × Diameter): 5 1/8" × 2 3/8" x 1" (130 mm × 60 mm x 25 mm)
Weight: Less than 1 oz (28 g)
What's in the Box?
Reactor 40 CCU (Course Computer Unit)
GHC™ 50 helm control display
Yamaha Gateway
CCU cable
Buzzer
NMEA 2000® drop cables (2 meters)
NMEA 2000 power cable
NMEA 2000 T-connectors
Male and female terminators
Documentation
1 Auto Guidance is for planning purposes only and does not replace safe navigation operations.
|
3794.99 |
|
|
Reactor™ 40 Steer-By-Wire Corepack for Volvo-Penta® with GHC™ 50 Autopilot Instrument
Every Captain Needs a Co-Pilot. Designed for yachts with a Volvo Penta system, this Reactor 40 autopilot steer-by-wire corepack gives you the extra hand you need, so you can explore paradise worry-free.
Features:
If you have a boat with a Volvo Penta system; this Reactor 40 corepack is the perfect companion.
Yes, it features a solid-state 9-axis AHRS. And yes, that means you can mount it nearly anywhere.
Even when you’re pitching or rolling, this autopilot reacts to sea conditions to keep you on course.
You just want to get on the water, so we made calibration fast and easy. That’s the power of simplicity.
Combine with your compatible Garmin chartplotter, and control your autopilot — from anywhere on your boat.
Want more? The optional GHC™ 50 autopilot instrument enhances your autopilot experience.
COREPACK COMPATIBILITY
This corepack works with vessels that have Volvo Penta inboard performance systems and sterndrive joystick systems.
SOLID-STATE 9-AXIS AHRS
With its advanced solid-state 9-axis AHRS, you can mount Reactor 40 nearly anywhere, in any orientation. It even reduces power consumption, minimizes heading error, and more.
REACTS TO WATER CONDITIONS
Hold your course on the sea — this autopilot reacts to conditions, so you can remain confident even when you’re pitching or rolling.
SIMPLE CALIBRATION
All autopilots require commissioning and calibration. Reactor 40 makes it quick and easy.
WIRELESS REMOTE CAPABILITIES
Control your autopilot from anywhere on your boat by using your compatible Garmin devices, including the Reactor autopilot remote, select quatix® marine smartwatches, and more (requires a compatible Garmin chartplotter or GHC 50 autopilot instrument).
OPTIONAL GHC 50 BUNDLE
Combine the Reactor 40 hydraulic autopilot with the GHC 50 autopilot instrument to add a dedicated touchscreen autopilot display to your helm. Plus, GHC 50 allows you to share data and settings with Garmin MFDs and other installed Garmin devices.
POWERBOAT AND SAILING FEATURES
When connected to your compatible Garmin chartplotter, all Reactor 40 corepacks offer powerboat and sailing features, including heading hold and step turns — plus wind hold and tack/jibe when paired with a wind sensor (sold separately). You can even gain additional benefits such as the following route and Auto Guidance+™ features1.
CCU Specifications:
Dimensions: 3 19/32" diameter (91.4 mm)
Weight: 5.6 oz (159 g)
Temperature range: From 5°F to 131°F (from -15°C to 55°C)
Case material: Fully gasketed, high-impact plastic, waterproof to IEC 529 IPX7 standards
CCU cable length: 9.5 ft (3 m)
NMEA 2000 power input: 9-16V
NMEA 2000 LEN: 3 (150 mA)
Buzzer/Alarm Specifications:
Dimensions (L × Diameter): 29/32" × 1" (23 mm × 25 mm)
Weight: 2.4 oz (68 g)
Temperature range: from 5°F to 131°F (from -15°C to 55°C)
Cable length: 10 ft (3.0 m)
Autopilot Gateway Specifications:
Dimensions (L × Diameter): 5 1/8" × 2 3/8" x 1" (130 mm × 60 mm x 25 mm)
Weight: Less than 1 oz (28 g)
What's in the Box?
Reactor 40 CCU (Course Computer Unit)
GHC™ 50 helm control display
Volvo IPS gateway
Interconnect cable
Buzzer
NMEA 2000® drop cables (2 meters)
NMEA 2000 power cable
NMEA 2000 T-connectors
Male and female terminators
Documentation
1 Auto Guidance is for planning purposes only and does not replace safe navigation operations.
|
7259.99 |
|
|
PowerPod Pre-Cut for Simrad NSS7 evo³ & B&G Zeus³ 7
PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.
PowerPods are now available in two color options. Black carbon and high gloss white. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.
NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8” opening (1.1” on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.
All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PowerPods are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.
PowerPods – Protection, Convenience, Security.
|
331.62 |
|
|
Medium Wincher Pair
The Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch. This tried and tested design has been a firm favorite with Sailors for many years.
The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.
Cleating is achieved by locking the sheet into the Wincher’s ribbed central groove.
Technical Specifications:
Fits Drum Diameter - 2.75" to 3" (70 to 80 mm)
Maximum Rope Diameter - .39" to .55" (10 to 14 mm)
Weight - 7.87 oz (223 g)
*Sold as a Pair
|
95.00 |
|
|
Reactor™ 40 Steer-By-Wire Corepack for Viking® VIPER™ with GHC™ 50 Autopilot Instrument
Every Captain Needs a Co-Pilot. Designed for Viking yachts with a Viking VIPER steering system, this Reactor 40 autopilot steer-by-wire corepack gives you the extra hand you need, so you can explore paradise worry-free.
Features:
You have a yacht with a Viking VIPER system; this Reactor 40 corepack is the perfect companion.
Yes, it features a solid-state 9-axis AHRS. And yes, that means you can mount it nearly anywhere.
Even when you’re pitching or rolling, this autopilot reacts to sea conditions to keep you on course.
You just want to get on the water, so we made calibration fast and easy. That’s the power of simplicity.
Combine with your compatible Garmin chartplotter, and control your autopilot — from anywhere on your boat.
Want more? The optional GHC™ 50 autopilot instrument enhances your autopilot experience.
COREPACK COMPATIBILITY
This corepack works with Viking yachts that have a Viking VIPER steering system. It requires a compatible Garmin chartplotter or GHC 50 autopilot instrument. This corepack works with yachts that have a Yamaha Helm Master system, and it requires a compatible Garmin chartplotter
SOLID-STATE 9-AXIS AHRS
With its advanced solid-state 9-axis AHRS, you can mount Reactor 40 nearly anywhere, in any orientation. It even reduces power consumption, minimizes heading error, and more.
REACTS TO WATER CONDITIONS
Hold your course on the sea — this autopilot reacts to conditions, so you can remain confident even when you’re pitching or rolling.
SIMPLE CALIBRATION
All autopilots require commissioning and calibration. Reactor 40 makes it quick and easy.
WIRELESS REMOTE CAPABILITIES
Control your autopilot from anywhere on your boat by using your compatible Garmin devices, including the Reactor autopilot remote, select quatix® marine smartwatches, and more (requires a compatible Garmin chartplotter or GHC 50 autopilot instrument).
OPTIONAL GHC 50 BUNDLE
Combine the Reactor 40 hydraulic autopilot with the GHC 50 autopilot instrument to add a dedicated touchscreen autopilot display to your helm. Plus, GHC 50 allows you to share data and settings with Garmin MFDs and other installed Garmin devices.
POWERBOAT AND SAILING FEATURES
When connected to your compatible Garmin chartplotter, all Reactor 40 corepacks offer powerboat and sailing features, including heading hold and step turns — plus wind hold and tack/jibe when paired with a wind sensor (sold separately). You can even gain additional benefits such as the following route and Auto Guidance+™ features1.
CCU Specifications:
Dimensions: 3 19/32" diameter (91.4 mm)
Weight: 5.6 oz (159 g)
Temperature range: From 5°F to 131°F (from -15°C to 55°C)
Case material: Fully gasketed, high-impact plastic, waterproof to IEC 529 IPX7 standards
CCU cable length: 9.5 ft (3 m)
NMEA 2000 power input: 9-16V
NMEA 2000 LEN: 3 (150 mA)
Buzzer/Alarm Specifications:
Dimensions (L × Diameter): 29/32" × 1" (23 mm × 25 mm)
Weight: 2.4 oz (68 g)
Temperature range: from 5°F to 131°F (from -15°C to 55°C)
Cable length: 10 ft (3.0 m)
What's in the Box?
Reactor 40 CCU (Course Computer Unit)
GHC™ 50 helm control display
CCU cable
Buzzer
NMEA 2000® drop cables (2 meters)
NMEA 2000 power cable
NMEA 2000 T-connectors
Male and female terminators
Documentation
1 Auto Guidance is for planning purposes only and does not replace safe navigation operations.
|
7699.99 |
|
|
GPS 24xd GPS Antenna with Heading Sensor for NMEA 2000 Network - Black
The GPS 24xd position receiver and antenna give users precise location with multi-band GNSS and heading accuracy even at slow speeds.
Features:
Navigate to more locations with expanded GNSS support
Get high-sensitivity tracking with a fast GPS update rate
Accurately pinpoint, regardless of speed
It’s water-resistant (IPX7) to withstand the elements
Install it easily with multiple mounting options
The antenna is compatible with NMEA 2000® devices
In the Box:
GPS 24xd NMEA 2000®
Pole mount
Surface mount
NMEA 2000 backbone/drop cable (6 meters)
NMEA 2000 T-connector
Documentation
Specifications:
Color: Black
Dimensions (D x H): 3 19/32" x 1 15/16" (91.6 mm x 49.5 mm)
Weight: 7.1 oz (201 g), white; 6.2 oz (176 g), black
Cable Length: 19 ft 8" (6 m)
Temperature Range: -22° to 176° F (-30° to 80° C), white; -22° to 149° F (-30° to 65° C), black
Case Material: Fully gasketed, high-impact plastic alloy; waterproof to IPX7
Compass-Safe Distance: 5.9" (150 mm)
Power Source Input: 9-32 Vdc
Input Current: 150 mA at 12 Vdc
NMEA 2000 Load Equivalency Number (LEN): 3 (150 mA)
Position Accuracy, Typical Marine Use: < 1-meter CEP, < 3 meters, 95%
|
328.49 |
|
|
Spring Loaded/Lined Slide/Aluminum for 1" T-Track
Delrin™ sheave ensures smooth operation and high safe working load. Anodized aluminum cheeks and stainless steel slider ensure reliability. Polyethylene liner and pin stop allow for easy adjustment.
Specifications:
Track Size 1" x 1/8" (25 mm x 3 mm)
Max. Boat Length- 27' (8m)
Max. Boat Weight- 5000 lbs. (2270 kgs)
Sail Area- 315 sq. ft (29 m2)
Sheave Diameter 2" (51 mm)
Max Line 7/16" (11 mm)
Length 3" (76 mm)
Width 1-1/4" (31 mm)
Height 4-5/32" (105 mm)
Bearing Height 2-7/32" (56 mm)
SWL 1750 lbs. (795 kg)
Weight 7.0 oz. (198 g)
|
184.27 |
|
|
GA™ 38 GPS/GLONASS Antenna for Cortex® V1 & M1
Built to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile water-resistant housing and provides 3 easy mounting solutions: pole, surface, or under-deck (for the underside of fiberglass decks). External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.
Specifications:
Dimensions (DxH): (inch) 3-19/32" x 1-5/18" / (mm) 91.6 x 49.5
Weight: 7.1 oz / 201 g.
Temperature Range: -22° F to 176° F / -30° C to 80° C
Case Material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7
What's In The Box?
GA 38
Surface mounting bracket
Pole mounting bracket
Under-deck mounting bracket
Mounting hardware
BNC-SMA antenna cable (32 ft/10m)
Installation instructions
|
109.40 |
|