|
XPTH 9 20 MSI T MEGA Plastic Thru-Hull Transducer
MEGA SI, MEGA DI, DualBeam PLUS, 20/60/86/55 degrees, 200/83/455/800 kHz and 1.2 MHz.
Temperature built-in, plastic through the hull transducer.
30' cable
Transducer dimensions: 7.34"L x 3"W
Shaft diameter: 1.0"
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
415.37 |
|
|
CPT-110
Plastic Thru-Hull Transducer for CP100 Sonar Module
Contains two elements, one for the conical beam CHIRP sonar (center frequency 200kHz) the other for the DownVision CHIRP sonar (center frequency 350kHZ)
Contains a temperture sensor
10M Cable
|
339.98 |
|
|
Bronze Thru-Hull Transducer w/ Temp, 600w (10-Pin)
600 Watts
50/200 kHz
45/15 degree Beam Angles
Bronze Thru-Hull with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
245.33 |
|
|
Side Scan Paired Thru-Hull Transducers for TZT3
The 225T-PR904 is a set of paired Thru-Hull transducers that work with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.
Features:
150 watts on each side
CHIRP 220-240kHz
Stainless Steel Thru-Hull with Temperature
12-pin connector
12m (40ft) cable
Specifications:
Install Type: Thru-Hull
Housing Type: Stainless Steel
|
1813.33 |
|
|
B260 Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin)
526T-HDD Bronze Thru-Hull Transducer with Broadband Technology
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block, # AIR-033-391
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1493.33 |
|
|
Airmar B75M
w/20° Tilt
600W
Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block.
This broadband transducer is designed to allow both traditional and Spread Spectrum scanning when used with a compatible sonar like the GSD 26. It features a bronze, thru-hull mount design with 20 degree tilt and provides both depth and temperature data to your Garmin Marine Network
Max Depth - 800'
Suppoarted Deadrise/Transom Angles - 16-24° Deadrise
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
791.99 |
|
|
Plastic Thru-Hull, Digital Depth and Temp Sensor (7-Pin)
200 Watts
235 kHz
Plastic Thru-Hull
Depth and Temperature (+/ - 1 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
600.00 |
|
|
Plastic Thru-Hull Speed and Temp Insert (6-Pin)
Plastic Thru-Hull Speed and Temperature Sensor
6-Pin Connector
9-Meter Cable
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
141.82 |
|
|
Bronze Thru Hull Transducer
Bronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Plastic Thru-Hull Transducers are an alternative to Bronze Thru-Hull Transducers.
Description: Bronze thru hull transducer, single or dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L X 2.75"W X 1.2"D (below hull); Shaft diameter: .86". Fairing block not included.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
390.94 |
|
|
Airmar B75M
w/0° Tilt
600W
Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block.
This broadband transducer is designed to allow both traditional and Spread Spectrum scanning when used with a compatible sonar like the GSD 26. It features a bronze, thru-hull mount design with 0 degree tilt and provides both depth and temperature data to your Garmin Marine Network
Max Depth - 800'
Suppoarted Deadrise/Transom Angles - 0-7° Deadrise
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
791.99 |
|
|
Airmar B75M
w/12° Tilt
600W
Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block.
This broadband transducer is designed to allow both traditional and Spread Spectrum scanning when used with a compatible sonar like the GSD 26. It features a bronze, thru-hull mount design with 12 degree tilt and provides both depth and temperature data to your Garmin Marine Network
Max Depth - 800'
Suppoarted Deadrise/Transom Angles - 6-15° Deadrise
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
791.99 |
|
|
556TID-HDD SS260 Stainless Steel Thru-Hull Transducer w/Temp and Fairing Block - 10 Pin
The SS260 is our best performing, stainless-steel, thru-hull stem for 1 kW echosounders. Its construction utilizes separate 50 kHz and 200 kHz elements for unparalleled deep-water performance and unmatched bottom and water-column detail. The SS260’s narrow beam gives crisp image detail especially suited for fishing shelves, intricate bottom structures, and wrecks.
Standard Features
1,000 Watts Power
50/200 kHz with Diplexer
20/6 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
10-Pin Connector
High Speed Fairing Block included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1333.33 |
|
|
B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin
Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.
Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.
The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.
Features:
Fixed 20° tilted version for 16° to 24° hull deadrise
12 Pin Connector for Garmin FishFinders
Depth and fast-response water-temperature sensor
1 kW with depth tracking down to 400 m (1,300#39;)
Medium frequency: 60-100 kHz
57° to 73° beamwidth (port/starboard)
16° average fore/aft
40 kHz of total bandwidth from one transducer
Medium frequency for superior mid-depth performance and excellent fish-target separation
Bronze housing for use on stepped, planing, or displacement hull
Low-profile, thru-hull housing yields good resolution at speed when installed properly
Exclusive Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 9 m (30'), 10 m (33')
Common Use: Fishing
Connector: Garmin 12-Pin
Country of Origin: USA
Display Connector: 12G
Functions: Depth, Temperature
Hole Size: 95 mm (3-3/4")
Hull Material: Fiberglass or wood
Material: Bronze
Max Deadrise Angle: 24°
Max Depth: 400 m (1300')
Max Vessel LOA: Up to 11 m (36')
Medium Frequency: 60-100 kHz
Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft)
Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a
Mounting Style: Tilted Element Thru-Hull
Power Rating: 1 kW
Single or Dual Frequency: Single
Tilt Angle: 20°
Tilted Element: Yes
Water Temperature: -10° to 40°C (14° to 104°F)
Weight: 2.7 kg (6 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1742.39 |
|
|
B175MW Med Ultra Wide 20°, 1KW Chirp Thru-Hull Transducer with 8-Pin Connector for Garmin
Airmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.
Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.
The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.
Features:
Fixed 20° tilted version for 16° to 24° hull deadrise
8 Pin Connector for Garmin FishFinders
Depth and fast-response water-temperature sensor
1 kW with depth tracking down to 400 m (1,300#39;)
Medium frequency: 60-100 kHz
57° to 73° beamwidth (port/starboard)
16° average fore/aft
40 kHz of total bandwidth from one transducer
Medium frequency for superior mid-depth performance and excellent fish-target separation
Bronze housing for use on stepped, planing, or displacement hull
Low-profile, thru-hull housing yields good resolution at speed when installed properly
Exclusive Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 9 m (30'), 10 m (33')
Common Use: Fishing
Connector: Garmin 8-Pin
Country of Origin: USA
Display Connector: 8G
Functions: Depth, Temperature
Hole Size: 95 mm (3-3/4")
Hull Material: Fiberglass or wood
Material: Bronze
Max Deadrise Angle: 24°
Max Depth: 400 m (1300')
Max Vessel LOA: Up to 11 m (36')
Medium Frequency: 60-100 kHz
Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft)
Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a
Mounting Style: Tilted Element Thru-Hull
Power Rating: 1 kW
Single or Dual Frequency: Single
Tilt Angle: 20°
Tilted Element: Yes
Water Temperature: -10° to 40°C (14° to 104°F)
Weight: 2.7 kg (6 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1742.39 |
|
|
T-04MSB Bronze Thru-Hull Temp Sensor - 6-Pin
Bronze Thru-Hull Temp Sensor, 8 Meter Cable with 6-Pin Connector.
Specifications:
Housing Type: Bronze
Install Type: Thru-Hull
Features:
Bronze Thru-Hull Temperature Sensor
6-Pin Connector
8-Meter Cable
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
436.37 |
|