SS260 Thru-Hull Transducer - Stainless Steel - 1kW - 50/200 - No Plug  Airmar SS260 Housing Style Transducer. Stainless Steel Thru-Hull Transducer with Temp and Fairing Block, 1 kW (No Plug). Features: 1,000 Watts Power 50/200 kHz, no Diplexer 20/6 degree Beam Angles Stainless Steel Thru-Hull with Temperature No Connector High Speed Fairing Block included Specifications: Beam Angle: 20° and 6° Housing Type: Stainless Steel Power Rating: 1kW Frequency: 50kHz and 200kHz Install Type: Thru-Hull This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar B175H 12° Tilt, 1kW CHIRP High, 130-210kHz Thru-Hull Transducer with Temp Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies. An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 8 to 15 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TM185HW High Wide CHIRP Transducer with Temp Transom Mount High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket  Features: Power Rating: 1kW Function: Depth,Temperature Frequency: CHIRP 150-250 kHz Mount Style: Transom Install Type: Transom Mount Housing Type: Urethane Housing Material: Urethane/Stainless Bracket This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B285HW CHIRP Bronze Transducer with FB 10-Pin High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Bronze Thru-Hull with High-Speed Fairing Block. Features: Power: 1kW Function: Depth, Temperature Frequency: 150-250 kHz Mount Style: Thru-Hull Housing Material: Bronze

PM265LM 1kW Pocket Mount Transducer with Temp, 42-65 & 85-135kHz Garmin's pocket mount transducer uses narrow beams to send depth and temperature as well as sonar return data to your Garmin Marine Network. A popular choice for boat builders, this 1 kW bare wire bronze transducer has a maximum depth of 3,000 ft; an operating frequency of 42 to 65 kHz and 85 to 135 kHz; and a beamwidth of 16 to 25 degrees and 6 to 10 degrees. The pocket mount is installation dependent. This is the best performing 1 kW pocket mount available. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Features: Depth & fast-response water-temperature sensor Low—CHIRPS from 42 kHz to 65 kHz 25° to 16° beamwidth (port-starboard) Medium—CHIRPS from 85 kHz to 135 kHz 16° to 11° beamwidth 73 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50, 88, and 107 kHz plus everything else in the bandwidth Fishing Profile: Commercial and recreational inshore and offshore fishing (deep-water canyon and sea-mount tracking) Bronze transducer housing Hull Type: Fiberglass only WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MB1100 The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already supplied, and so does not require the use of a separate pigtail cable assembly. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Garmin GT30-THP - Stainless Steel Thru-hull Pair DownVü/SideVü 500W (CHIRP 455/800 kHz) Scanning Transducers with Temp, for Hull Deadrises from 5° to 25° (12-pin) Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with these 12-pin thru-hull transducer with stainless steel stems. These transducers with built-in fast response temperature sensors have a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownVü) and 500 ft left and right (SideVü); an operating frequency of CHIRP 455/800 kHz; for hull deadrises from 5 degrees to 25 degrees. Pair them with your GCV™ 10 scanning sonar module. Includes 12-pin port and starboard transducers with stainless steel stems, isolation bushings, fairing blocks, Y-cable, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. Compatible Devices: GCV™ 10 Scanning Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TM185M Medium-Frequency CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket Features: Frequency: Chirp 85 - 135 kHz Power Rating: 1KW Connector: 10 Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

T-04MSB Bronze Thru-Hull Temp Sensor - 6-Pin Bronze Thru-Hull Temp Sensor, 8 Meter Cable with 6-Pin Connector.  Specifications: Housing Type: Bronze Install Type: Thru-Hull Features:  Bronze Thru-Hull Temperature Sensor 6-Pin Connector 8-Meter Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Garmin GT30-TH - Stainless Steel Thru-hull DownVü/SideVü 500W (CHIRP 455/800 kHz) Scanning Transducer with Temp, for Hull Deadrises Less Than 5° (12-pin) Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin thru-hull transducer with stainless steel stem. This transducer with built-in fast response temperature sensor has a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownVü) and 500 ft left and right (SideVü) an operating frequency of CHIRP 455/800 kHz; for hull deadrises less than 5 degrees. Pair it with your GCV™ 10 scanning sonar module. Includes transducer with stainless steel stem, fairing block, isolation plate and bushings, extension cable, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. Compatible Devices: GCV™ 10 Scanning Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Portable Transducer Portable Transducers mount on the transom or side of almost any wood, aluminum, or fiberglass boat. A heavy duty rubber suction cup provides for temporary installation and holds the transducer at trolling motor speeds only. For a completely portable fishfinder, The Portable Case (PTC-W2) accessory contains all parts needed to convert your existing fishfinder to portable operation using your existing transducer. Description: Portable Transducer with Temperature Sensor, Hydrodynamic, single or dual beam (depending on which fish finder it is used with), 24 and 53 degree cone angles, 200/83 kHz. Includes 15' cable, portable mounting hardware. For Use With: Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565, PMAX10, PMAX15, PMAX 20 WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

B285M Medium-Frequency CHIRP Transducer with Temperature - Bronze Thru-Hull with High Speed Fairing Block Features: Frequency: Chirp 85 - 135 kHz Power Rating: 1 KW Connector: 10 Pin Fairing Block: High Speed Fairing Block Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

XNT-9-HW-T HELIX® Dual Spectrum CHIRP Transom Mount Transducer with Temp Transom Mount Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. Includes built-in temperature sensor, rugged composite design, impact-release mounting bracket and 20' cable.  Features: This accessory is compatible with the following Humminbird products: HELIX 5 CHIRP G2 – GPS-equipped models only, HELIX 7 CHIRP G2/G3 – GPS-equipped and CHIRP DI G2 models, HELIX 7 CHIRP G2N/G3N – All models, HELIX 8 CHIRP G3N – All models, HELIX 9 CHIRP G2N/G3N – All models, HELIX 10 CHIRP G2N/G3N – All models, HELIX 12 CHIRP G2N/G3N – All models, ICE HELIX CHIRP G2 – All models (in Open Water Mode) Side Imaging™ and Down Imaging™ units can support the XNT 9 HW T as a 2D sonar only transducer. This transducer does not support Side Imaging™ or Down Imaging™. Dual Spectrum CHIRP: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz Dual Spectrum CHIRP- Max Depth: 1200ft (365m) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XP-14-HW-T Dual Spectrum CHIRP In-Hull Transducer with Temp for SOLIX™ In-Hull Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz and max depth of 1200ft. Intended for glue-in installation inside single layer fiberglass hulls. Includes built-in temperature sensor, epoxy kit and 20’ cable.  Features: This accessory is compatible with the following Humminbird products: SOLIX® 10, 12, 15 – All G2 Models. Side Imaging™ and Down Imaging™ units can support the XP 14 HW T as a 2D sonar only transducer. This transducer does not support Side Imaging or Down Imaging. Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz DUAL Spectrum CHIRP Max Depth: 1200ft (365m) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XTM-9-HW-T Dual Spectrum CHIRP Trolling Motor Transducer with Temp for HELIX® Trolling Motor Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 20’ cable.  Features: This accessory is compatible with the following Humminbird products: HELIX 5 CHIRP G2 – GPS-equipped models only, HELIX 7 CHIRP G2/G3 – GPS-equipped and CHIRP DI G2 models, HELIX 7 CHIRP G2N/G3N – All models, HELIX 8 CHIRP G3N – All models, HELIX 9 CHIRP G2N/G3N – All models, HELIX 10 CHIRP G2N/G3N – All models, HELIX 12 CHIRP G2N/G3N – All models, ICE HELIX CHIRP G2 – All models (In Open Water Mode). Side Imaging™ and Down Imaging™ units can support the XTM 9 HW T as a 2D sonar only transducer. This transducer does not support Side Imaging or Down Imaging. Dual Spectrum CHIRP: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz Dual Spectrum CHIRP Max Depth: 1200ft (365m) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.